diff --git a/docs/node-operator-guide.md b/docs/node-operator-guide.md
index 82eb2f864..fe0834eeb 100644
--- a/docs/node-operator-guide.md
+++ b/docs/node-operator-guide.md
@@ -163,6 +163,7 @@ You have two options to get the `kwild` binary.
 
     ```bash
     sudo mv .build/kwild /usr/local/bin/
+    sudo chmod +x /usr/local/bin/kwild
     ```
 
     For Linux users, apply new docker group:
@@ -776,6 +777,136 @@ To view logs since the last system boot:
 sudo journalctl -u kwild -b
 ```
 
+## Resetting Your Node Instance
+
+Sometimes you may need to reset your node to sync from a specific point or recover from an inconsistent state. This is different from a complete removal - you preserve your configuration but reset the blockchain data.
+
+### When to Reset Your Node
+
+- Network fork or critical incident requiring new genesis
+- Database corruption or inconsistent state
+- Joining the network from a specific block height
+- Following network recovery procedures
+
+### Reset Procedure
+
+1. **Stop and disable services**:
+   ```bash
+   # For Linux
+   sudo systemctl stop kwild tn-postgres
+   sudo systemctl disable kwild tn-postgres
+   sudo systemctl daemon-reload
+   
+   # For macOS
+   launchctl stop com.trufnetwork.kwild
+   launchctl stop com.trufnetwork.tn-postgres
+   ```
+
+2. **Backup node identity and configuration** (to preserve them):
+   ```bash
+   # Create backup directory
+   mkdir -p ~/truf-node-operator/backup-reset
+   
+   # Backup nodekey to preserve node identity
+   cp ~/truf-node-operator/my-node-config/nodekey.json ~/truf-node-operator/backup-reset/
+   
+   # Backup config.toml if you want to preserve custom settings (optional)
+   cp ~/truf-node-operator/my-node-config/config.toml ~/truf-node-operator/backup-reset/
+   ```
+
+3. **Remove PostgreSQL data and node configuration**:
+   ```bash
+   # Remove Docker resources
+   docker stop tn-postgres
+   docker rm tn-postgres
+   docker volume rm tn-pgdata
+   
+   # Remove entire node configuration directory
+   rm -rf ~/truf-node-operator/my-node-config
+   ```
+
+4. **Regenerate node configuration**:
+   ```bash
+   # Pull latest changes (for network forks)
+   cd ~/truf-node-operator
+   git pull
+   
+   # Reinitialize configuration
+   kwild setup init \
+     --genesis ./configs/network/v2/genesis.json \
+     --root ./my-node-config \
+     --p2p.bootnodes "4e0b5c952be7f26698dc1898ff3696ac30e990f25891aeaf88b0285eab4663e1#ed25519@node-1.mainnet.truf.network:26656,0c830b69790eaa09315826403c2008edc65b5c7132be9d4b7b4da825c2a166ae#ed25519@node-2.mainnet.truf.network:26656" \
+     --state-sync.enable \
+     --state-sync.trusted-providers "0c830b69790eaa09315826403c2008edc65b5c7132be9d4b7b4da825c2a166ae#ed25519@node-2.mainnet.truf.network:26656" \
+     --rpc.private
+   ```
+
+5. **Update kwild binary** *(optional but recommended)*:
+   ```bash
+   # Option 1: Download latest release
+   curl -L "https://github.com/trufnetwork/node/releases/latest/download/tn_<VERSION>_linux_amd64.tar.gz" \
+       -o kwild.tgz
+   tar -xzf kwild.tgz kwild
+   sudo mv kwild /usr/local/bin/kwild
+   sudo chmod +x /usr/local/bin/kwild
+   
+   # Option 2: Build from source
+   cd ~/node # assuming you cloned the node repository here, please adjust if different
+   git pull && task build
+   sudo mv .build/kwild /usr/local/bin/kwild
+   sudo chmod +x /usr/local/bin/kwild
+   
+   # Verify version
+   kwild version
+   ```
+
+6. **Restore node identity and custom configuration** *(optional)*:
+   
+   > **Note**: Skip this step if you want to start with a completely fresh node identity and default configuration. Only restore if you need to preserve your existing validator status or custom settings.
+   
+   ```bash
+   # Restore nodekey to preserve node identity
+   cp ~/truf-node-operator/backup-reset/nodekey.json ~/truf-node-operator/my-node-config/
+   
+   # Restore config.toml if you want to keep custom settings (optional)
+   cp ~/truf-node-operator/backup-reset/config.toml ~/truf-node-operator/my-node-config/
+   ```
+
+7. **Recreate PostgreSQL**:
+   ```bash
+   docker run -d -p 127.0.0.1:5432:5432 --name tn-postgres \
+       -e "POSTGRES_HOST_AUTH_METHOD=trust" \
+       -v tn-pgdata:/var/lib/postgresql/data \
+       --shm-size=1gb \
+       kwildb/postgres:latest
+   ```
+
+8. **Re-enable and start services**:
+   ```bash
+   # For Linux
+   sudo systemctl enable tn-postgres kwild
+   sudo systemctl start tn-postgres
+   sudo systemctl start kwild
+   
+   # For macOS
+   launchctl start com.trufnetwork.tn-postgres
+   launchctl start com.trufnetwork.kwild
+   ```
+
+9. **Monitor synchronization**:
+   ```bash
+   kwild admin status
+   ```
+   Wait for `syncing: false` and ensure your `best_block_height` is advancing.
+
+### Important Notes
+
+- This process preserves your node identity (nodekey.json) and configuration files
+- Your validator status (if applicable) is preserved
+- The node will resync from the genesis block specified in the new genesis.json
+- State sync (if enabled in your config) allows fast resynchronization
+- For critical network incidents, always check the [Node Upgrade Guide](node-upgrade-guide.md#breaking-changes--migrations) for specific instructions
+
 ## Clean Removal
 
 > **Warning**: The following steps will completely remove your node setup, including all data and configuration. This is irreversible and should only be done if:
@@ -800,7 +931,8 @@ docker stop tn-postgres
 docker rm tn-postgres
 docker volume rm tn-pgdata
 
-# Remove node configuration
+# Remove node configuration (optional - only if you want to regenerate nodekey)
+# This will create a new node identity on next init
 rm -rf $HOME/truf-node-operator/my-node-config
 ```
 
@@ -822,6 +954,8 @@ docker stop tn-postgres
 docker rm tn-postgres
 docker volume rm tn-pgdata
 
+# Remove node configuration (optional - only if you want to regenerate nodekey)
+# This will create a new node identity on next init
 rm -rf $HOME/truf-node-operator/my-node-config
 ```
 
diff --git a/docs/node-upgrade-guide.md b/docs/node-upgrade-guide.md
index b17d2f872..fe4644ec8 100644
--- a/docs/node-upgrade-guide.md
+++ b/docs/node-upgrade-guide.md
@@ -98,11 +98,31 @@ If the release notes specify a new official Postgres image (e.g. `kwildb/postgre
 
 ---
 
-## Breaking Changes & Migrations (TBD)
+## Breaking Changes & Migrations
 
 When a new version introduces consensus-breaking changes, a simple binary replacement is **not sufficient**.  
 These scenarios require a **network migration** (offline or zero-downtime) and coordination with the core team.
 
+### Network Fork Recovery
+
+When the network requires a fork due to consensus changes or critical issues, you'll need to reset your node with a new genesis file.
+
+**Prerequisites:**
+- Check official announcements for specific migration instructions
+- Ensure you have the latest `truf-node-operator` repository (`git pull`)
+
+**Recovery Steps:**
+
+Follow the **[Resetting Your Node Instance](node-operator-guide.md#resetting-your-node-instance)** procedure in the Node Operator Guide. The process preserves your node identity and configuration while syncing with the new network state.
+
+**What's Preserved During Network Forks:**
+- Node identity (nodekey) and validator status
+- All custom configuration settings
+- Chain ID continuity
+- Historical data up to the fork point
+
+### Other Migration Types
+
 See:
 * [Migrations overview](/docs/node/migrations)
 * [Offline migrations guide](/docs/node/migrations/offline-migrations)