EAGLE files and so forth for the rear PCB on Twinklr
Eagle
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Failed to load latest commit information.
gerber
.gitignore
README.md
twinklr_board.brd
twinklr_board.sch
twinklr_board_5v.brd
twinklr_board_5v.sch

README.md

Twinklr Main Board

This repository contains layouts for the Twinklr main PCB in EAGLE's brd and sch formats. Gerber files are also included.

twinklr_board

This was the original Twinklr board with a built-in 1W amplifier. Unfortunately, it doesn't really work very well, so the amplifier was removed from the final version.

twinklr_board_5v

This is the board used in the current version of Twinklr. It distributes 5V from a tip-negative PSU to the Raspberry Pi, rather than stepping down 9V with a regulator. It has no amplifier.

License

Twinklr is Open Hardware.

Creative Commons License
Twinklr by Tom Armitage and Richard Birkin is Open Hardware. It is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License
If you use any work in this project, you should credit us, and you must republish any changes you make under the same license. This license does permit commercial use of these designs, but consider getting in touch before selling anything.