root@stm32mp1-hexabitzv2-mx:~/LTE_1/ubxlib/port/platform/linux/mcu/posix/runner/issam/build# ./issam_LTE U_CELL: initialising with enable power pin not connected, PWR_ON pin not connected and VInt pin not connected. AT OK AT OK U_CELL_PWR: powering on, module is already on. ATE0 OK AT+CMEE=2 OK AT+UDCONF=1,0 OK ATI9 02.00,A01.22 OK AT&C1 OK AT&D0 OK AT&K0 OK AT+UPSV=0 OK AT+UGPRF? +UGPRF:2,0,"" OK AT+CFUN=4 OK +CREG: 0,"0000","0000",0 +CEREG: 0,"0000","00000000", 0,,,"00000000","00000000" +CREG: 0,"0000","0000" +CGREG: 0,"0000","0000" U_PORT_PPP: listening for pppd on socket 127.0.0.1:5000. Opened device with return code 0. Bringing up the network... U_CELL_NET: preparing to register/connect... AT+CREG=2 OK AT+CGREG=2 OK AT+CEREG=4 U_PORT_PPP: pppd has connected to socket. OK AT+CIMI 234502106062261 OK U_CELL_NET: user-specified APN is "TM". AT+CGDCONT=1,"IP","TM" OK AT+UAUTHREQ=1,0,"","" OK U_CELL_NET: setting automatic network selection mode... AT+COPS? +COPS: 0 OK AT+CFUN=1 OK AT+CREG? +CREG: 0,"0000","0000",0 OK -1: NReg AT+CGREG? +CGREG: 2,0,"0000","0000" OK -1: NReg AT+CEREG? +CEREG: 4,0,"0000","00000000", 0,0,0,"00000000","00000000" OK -1: NReg AT+CREG? +CREG: 0,"0000","0000",0 OK -1: NReg +CREG: 5,"35c5","00dcf205",7 +CEREG: 5,"35c5","00dcf205",7 +CREG: 5,"35C5","00DC" +CGREG: 4,"35C5","00DC" 7: RegR 7: RegR 0: RegR -1: Unk 0 AT+COPS=3,0 OK AT+COPS? +COPS: 0,0,"Orange F",7 OK AT+CGATT? +CGATT:1 OK AT+CGACT? +CGACT: 0,0 OK AT+CGACT=1,1 OK AT+CGACT? +CGACT: 1,1 OK AT+CEER +CEER:No Error Call OK U_CELL_NET: connected after 6 second(s). AT+CGACT? +CGACT: 1,1 OK AT+CGPADDR=1 +CGPADDR: 1,"10.5.159.114" OK U_CELL_NET: IP address "10.5.159.114". AT+CGCONTRDP=1 +CGCONTRDP: 1,6,"TM.mnc050.mcc234.gprs","10.5.159.114.0.0.0.0" OK U_CELL_NET: unable to read DNS addresses. AT+CMUX=0,0,,128 OK ATE0 ATE0 OK AT+CMEE=2 OK U_CELL_PPP: sent ATD*99***1#[0d] U_CELL_PPP: received ATD*99***1#[0d][0d][0a]CONNECT[0d][0a] U_PORT_PPP: socket connected to module. Found 18.133.144.142 at 18.133.144.142. Sent 50 byte(s) to echo server. Received echo back (103 byte(s)): HTTP/1.1 400 Bad Request Content-Type: text/plain; charset=utf-8 Connection: close 400 Bad Request Closing socket... Taking down network... U_CELL_PPP: sent ~[ff]}#[c0]!}%}"} }0User requestS3~ U_CELL_PPP: received ~[ff]}#[c0]!}%}"} }0User requestS3~ U_CELL_PPP: *** WARNING *** PPP did not terminate, it may not connect next time, you may wish to reboot the module. U_PORT_PPP: socket disconnected from module (but pppd still connected to socket). AT+COPS? +COPS: 0,0,"Orange F",7 OK AT+CFUN=4 OK +CREG: 0,"0000","0000",0 +CEREG: 0,"0000","00000000", 0,,,"00000000","00000000" +CREG: 0,"0000","0000" +CGREG: 0,"0000","0000" -1: NReg -1: NReg -1: NReg -1: NReg U_CELL_NET: disconnected. AT+CEER +CEER:No Error Call OK Closing device... Deinitializing ubxlib... U_PORT_PPP: pppd has been disconnected from socket. U_PORT_PPP: no longer listening for pppd on socket. Done.