-
Notifications
You must be signed in to change notification settings - Fork 3.6k
/
fsl-imx8qm-mek.dts
184 lines (163 loc) · 5.01 KB
/
fsl-imx8qm-mek.dts
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2017-2018 NXP
*/
/dts-v1/;
#include "fsl-imx8qm.dtsi"
#include "fsl-imx8qm-mek-u-boot.dtsi"
/ {
model = "Freescale i.MX8QM MEK";
compatible = "fsl,imx8qm-mek", "fsl,imx8qm";
chosen {
bootargs = "console=ttyLP0,115200 earlycon=lpuart32,0x5a060000,115200";
stdout-path = &lpuart0;
};
reg_usdhc2_vmmc: usdhc2_vmmc {
compatible = "regulator-fixed";
regulator-name = "sw-3p3-sd1";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>;
off-on-delay = <4800>;
enable-active-high;
};
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
imx8qm-mek {
pinctrl_hog: hoggrp {
fsl,pins = <
SC_P_MCLK_OUT0_AUD_ACM_MCLK_OUT0 0x0600004c
SC_P_QSPI1A_DATA1_LSIO_GPIO4_IO25 0x0600004c
SC_P_SCU_GPIO0_03_LSIO_GPIO0_IO31 0x0600004c
>;
};
pinctrl_fec1: fec1grp {
fsl,pins = <
SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB_PAD 0x000014a0
SC_P_ENET0_MDC_CONN_ENET0_MDC 0x06000020
SC_P_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020
SC_P_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x00000061
SC_P_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC 0x00000061
SC_P_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x00000061
SC_P_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x00000061
SC_P_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2 0x00000061
SC_P_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3 0x00000061
SC_P_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC 0x00000061
SC_P_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x00000061
SC_P_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x00000061
SC_P_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x00000061
SC_P_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2 0x00000061
SC_P_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x00000061
>;
};
pinctrl_fec2: fec2grp {
fsl,pins = <
SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETA_PAD 0x000014a0
SC_P_ENET1_RGMII_TX_CTL_CONN_ENET1_RGMII_TX_CTL 0x00000060
SC_P_ENET1_RGMII_TXC_CONN_ENET1_RGMII_TXC 0x00000060
SC_P_ENET1_RGMII_TXD0_CONN_ENET1_RGMII_TXD0 0x00000060
SC_P_ENET1_RGMII_TXD1_CONN_ENET1_RGMII_TXD1 0x00000060
SC_P_ENET1_RGMII_TXD2_CONN_ENET1_RGMII_TXD2 0x00000060
SC_P_ENET1_RGMII_TXD3_CONN_ENET1_RGMII_TXD3 0x00000060
SC_P_ENET1_RGMII_RXC_CONN_ENET1_RGMII_RXC 0x00000060
SC_P_ENET1_RGMII_RX_CTL_CONN_ENET1_RGMII_RX_CTL 0x00000060
SC_P_ENET1_RGMII_RXD0_CONN_ENET1_RGMII_RXD0 0x00000060
SC_P_ENET1_RGMII_RXD1_CONN_ENET1_RGMII_RXD1 0x00000060
SC_P_ENET1_RGMII_RXD2_CONN_ENET1_RGMII_RXD2 0x00000060
SC_P_ENET1_RGMII_RXD3_CONN_ENET1_RGMII_RXD3 0x00000060
>;
};
pinctrl_lpuart0: lpuart0grp {
fsl,pins = <
SC_P_UART0_RX_DMA_UART0_RX 0x06000020
SC_P_UART0_TX_DMA_UART0_TX 0x06000020
>;
};
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
SC_P_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041
SC_P_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021
SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021
SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021
SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021
SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021
SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021
SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021
SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021
SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021
SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041
SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x00000021
>;
};
pinctrl_usdhc2_gpio: usdhc2grpgpio {
fsl,pins = <
SC_P_USDHC1_DATA6_LSIO_GPIO5_IO21 0x00000021
SC_P_USDHC1_DATA7_LSIO_GPIO5_IO22 0x00000021
SC_P_USDHC1_RESET_B_LSIO_GPIO4_IO07 0x00000021
>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
SC_P_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041
SC_P_USDHC1_CMD_CONN_USDHC1_CMD 0x00000021
SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000021
SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000021
SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000021
SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000021
SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021
>;
};
};
};
&usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
bus-width = <8>;
non-removable;
status = "okay";
};
&usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
bus-width = <4>;
cd-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>;
vmmc-supply = <®_usdhc2_vmmc>;
status = "okay";
};
&fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
phy-mode = "rgmii-txid";
phy-handle = <ðphy0>;
fsl,magic-packet;
fsl,rgmii_rxc_dly;
status = "okay";
mdio {
#address-cells = <1>;
#size-cells = <0>;
ethphy0: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
at803x,eee-disabled;
at803x,vddio-1p8v;
};
ethphy1: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
at803x,eee-disabled;
at803x,vddio-1p8v;
status = "disabled";
};
};
};
&lpuart0 { /* console */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart0>;
status = "okay";
};
&gpio1 {
status = "okay";
};