Skip to content
A guide for installing macOS on an EVGA Z270 Stinger motherboard and i7-7700k
C++ Python Objective-C C HTML Shell
Branch: master
Clone or download
Permalink
Type Name Latest commit message Commit time
Failed to load latest commit information.
EFI Included entire EFI folder instead of CLOVER folder Sep 17, 2017
Utilities Added useful utilities Sep 17, 2017
.gitignore Added .DS_Store to .gitignore Sep 14, 2017
README.md Added PC Part Picker link Oct 4, 2017
bios-backup.272 Added backup of BIOS Sep 16, 2017

README.md

img_20170917_020151

Sierra Hackintosh Guide for EVGA Z270 Stinger (200 series)

A guide for installing macOS Sierra on an EVGA Z270 Stinger motherboard and i7-7700k

This guide will show you how to install macOS Sierra 10.12.6 on a desktop running an EVGA Z270 Stinger motherboard. There are no changes made to the operating system partition, resulting in a very vanilla and therefore upgradable experience. For best results, use the hardware listed below.

Hardware

View on PC Part Picker

Note: This guide may need to be tweaked for similar hardware, such as any other 200 series motherboard. Any (or no) NVMe drive, any Kaby Lake CPU, and any GPU will likely work as is.

What works

  • GPU hardware acceleration
  • — Metal Support
  • NVMe
  • — TRIM Support
  • Hardware sensors
  • Audio
  • — HDMI Audio
  • — All 5 analog in/out ports
  • Ethernet
  • Sleep
  • — Enters low power mode
  • — Audio wakes up
  • — Ethernet wakes up
  • — Video wakes up
  • Shutdown
  • — Stays shut down
  • — CMOS does not reset
  • USB
  • — USB 3.0
  • — USB 3.1
  • — USB-C

What doesn't work

  • iMessage / Facetime
  • Power button
  • Wi-Fi (AW-CB210NF-P)
  • Bluetooth
  • HDCP
  • Nvidia Web Drivers
  • Accurate External / Internal drive icons
  • Sleep slider in System Preferences > Energy Saver is missing

Instructions

Step 1: Download macOS Sierra

On a separate Mac, verify that you are up to date (at least 10.12.6). image

Find macOS Sierra in the App Store (direct link) and download it. image

Quit the installer when it opens. image

Step 2: Create Bootable USB

Format Flash Drive

Plug an 8+ GB flash drive in.

In /Applications/Utilities/Terminal.app, run diskutil list to find your disk identifier. Be sure, because we will be erasing this disk. For example, in the below screenshot my disk identiier is 1. image

Run the following and replace # with your flash drive's disk identifier.

  diskutil partitionDisk /dev/disk# GPT JHFS+ "Install macOS Sierra" 100%

You should see a volume named "Install macOS Sierra". Now run the following command to move macOS Sierra onto the drive. This command may take 30-40 minutes.

  sudo "/Applications/Install macOS Sierra.app/Contents/Resources/createinstallmedia" --volume /Volumes/Install\ macOS\ Sierra --applicationpath "/Applications/Install macOS Sierra.app" --nointeraction

In the end, your terminal should look something like this. image

Install Clover

Download the latest version of the Clover EFI bootloader (direct link) and run it. (I used Clover_v2.4k_r4200)

Click Continue twice, and then Change Install Location... to select your flash drive. image

Click Continue again and then click Customize and check "Install or UEFI booting only" image

Then click Install to complete the Clover installation.

Update Clover Configuration

Open the EFI partition created by Clover, and replace the EFI folder with the attached EFI folder.

This will replace the config.plist file with the one I have created as well as install needed kexts. The config.plist file I created contains only the minimum configuration needed for a completely working system. I spent many hours testing many configurations and making sure only what was necessary was added. If you want to use more up-to-date kexts, view the Sources section at the bottom.

Step 3: Conigure BIOS

During boot, press F2 to enter BIOS. Navigate to the ADVANCED tab and then click on CPU Configuration. Set Intel(R) Virtualization Technology For Directed I/O to Disabled. img_20170915_202425

Set the primary boot device to USB Hard Disk. img_20170915_202326

Now press F10 to save and exit setup. Alternatively, you may apply the BIOS backup I created here.

Step 4: Install macOS

Installation

With the flash drive plugged in, boot the computer. If all goes well, you should be at the macOS installer screen. When the two part installer finishes, boot the computer one more time with the flash drive still plugged in.

You should now see your new macOS install as a bootable option in Clover. Select it and wait for it to boot. After logging in,

Install Clover

Download the latest version of the Clover EFI bootloader (direct link) and run it. (I used Clover_v2.4k_r4200)

Click Continue twice, and then Change Install Location... to select your macOS installation. image

Click Continue again and then click Customize and check "Install or UEFI booting only" image

Then click Install to complete the Clover installation.

Update Clover Configuration

Open the EFI partition created by Clover, and replace the EFI folder with the attached EFI folder.

This will replace the config.plist file with the one I have created as well as install needed kexts. The config.plist file I created contains only the minimum configuration needed for a completely working system. I spent many hours testing many configurations and making sure only what was necessary was added. If you want to use more up-to-date kexts, view the Sources section at the bottom.

Kexts / Patches / Sources

You can’t perform that action at this time.