diff --git a/tests/config/UNI-18437.cfg b/tests/config/UNI-18437.cfg index e9d5894885..4ba5e2242e 100644 --- a/tests/config/UNI-18437.cfg +++ b/tests/config/UNI-18437.cfg @@ -1,1918 +1,254 @@ -### This file holds rules common to all c-style languages (currently C# and C++) -# -## -## General options -## -# -#newlines { Auto, LF, CR, CRLF } -# The type of line endings. Default=Auto -# -input_tab_size=4 # Number -# The original size of tabs in the input. Default=8 -# -#output_tab_size Number -# The size of tabs in the output (only used if align_with_tabs=true). Default=8 -# -#string_escape_char Number -# The ASCII value of the string escape char, usually 92 (\) or 94 (^). (Pawn) -# -#string_escape_char2 Number -# Alternate string escape char for Pawn. Only works right before the quote char. -# -string_replace_tab_chars=true # { False, True } -# Replace tab characters found in string literals with the escape sequence \t instead. -# -tok_split_gte=false # { False, True } -# Allow interpreting '>=' and '>>=' as part of a template in 'void f(list>=val);'. -# If true, 'assert(x<0 && y>=3)' will be broken. Default=False -# Improvements to template detection may make this option obsolete. -# -disable_processing_cmt=*begin-nonstandard-formatting* -# Override the default ' *INDENT-OFF*' in comments for disabling processing of part of the file. -# -enable_processing_cmt=*end-nonstandard-formatting* -# Override the default ' *INDENT-ON*' in comments for enabling processing of part of the file. -# -#enable_digraphs { False, True } -# Enable parsing of digraphs. Default=False -# -utf8_bom=remove # { Ignore, Add, Remove, Force } -# Control what to do with the UTF-8 BOM (recommend 'remove') -# -utf8_byte=false # { False, True } -# If the file contains bytes with values between 128 and 255, but is not UTF-8, then output as UTF-8 -# -utf8_force=false # { False, True } -# Force the output encoding to UTF-8 -# -## -## Indenting -## -# -indent_columns=4 # Number -# The number of columns to indent per level. -# Usually 2, 3, 4, or 8. Default=8 -# -#indent_continue Number -# The continuation indent. If non-zero, this overrides the indent of '(' and '=' continuation indents. -# For FreeBSD, this is set to 4. Negative value is absolute and not increased for each ( level -# -indent_with_tabs=0 # Number -# How to use tabs when indenting code -# 0=spaces only -# 1=indent with tabs to brace level, align with spaces (default) -# 2=indent and align with tabs, using spaces when not on a tabstop -# -indent_cmt_with_tabs=false # { False, True } -# Comments that are not a brace level are indented with tabs on a tabstop. -# Requires indent_with_tabs=2. If false, will use spaces. -# -indent_align_string=false # { False, True } -# Whether to indent strings broken by '\' so that they line up -# -#indent_xml_string Number -# The number of spaces to indent multi-line XML strings. -# Requires indent_align_string=True -# -#indent_brace Number -# Spaces to indent '{' from level -# -indent_braces=false # { False, True } -# Whether braces are indented to the body level -# -indent_braces_no_func=false # { False, True } -# Disabled indenting function braces if indent_braces is true -# -indent_braces_no_class=false # { False, True } -# Disabled indenting class braces if indent_braces is true -# -indent_braces_no_struct=false # { False, True } -# Disabled indenting struct braces if indent_braces is true -# -indent_brace_parent=false # { False, True } -# Indent based on the size of the brace parent, i.e. 'if' => 3 spaces, 'for' => 4 spaces, etc. -# -#indent_paren_open_brace { False, True } -# Indent based on the paren open instead of the brace open in '({\n', default is to indent by brace. -# -indent_cs_delegate_brace=true # { False, True } -# indent a C# delegate by another level, default is to not indent by another level. -# -indent_namespace=true # { False, True } -# Whether the 'namespace' body is indented -# -#indent_namespace_single_indent { False, True } -# Only indent one namespace and no sub-namespaces. -# Requires indent_namespace=true. -# -#indent_namespace_level Number -# The number of spaces to indent a namespace block -# -#indent_namespace_limit Number -# If the body of the namespace is longer than this number, it won't be indented. -# Requires indent_namespace=true. Default=0 (no limit) -# -indent_extern=false # { False, True } -# Whether the 'extern "C"' body is indented -# -indent_class=true # { False, True } -# Whether the 'class' body is indented -# -indent_class_colon=false # { False, True } -# Whether to indent the stuff after a leading base class colon -# -#indent_class_on_colon { False, True } -# Indent based on a class colon instead of the stuff after the colon. -# Requires indent_class_colon=true. Default=False -# -#indent_constr_colon { False, True } -# Whether to indent the stuff after a leading class initializer colon -# -#indent_ctor_init_leading Number -# Virtual indent from the ':' for member initializers. Default=2 -# -#indent_ctor_init Number -# Additional indenting for constructor initializer list -# -indent_else_if=false # { False, True } -# False=treat 'else\nif' as 'else if' for indenting purposes -# True=indent the 'if' one level -# -#indent_var_def_blk Number -# Amount to indent variable declarations after a open brace. neg=relative, pos=absolute -# -indent_var_def_cont=false # { False, True } -# Indent continued variable declarations instead of aligning. -# -#indent_shift { False, True } -# Indent continued shift expressions ('<<' and '>>') instead of aligning. -# Turn align_left_shift off when enabling this. -# -#indent_func_def_force_col1 { False, True } -# True: force indentation of function definition to start in column 1 -# False: use the default behavior -# -indent_func_call_param=true # { False, True } -# True: indent continued function call parameters one indent level -# False: align parameters under the open paren -# -indent_func_def_param=true # { False, True } -# Same as indent_func_call_param, but for function defs -# -indent_func_proto_param=true # { False, True } -# Same as indent_func_call_param, but for function protos -# -indent_func_class_param=false # { False, True } -# Same as indent_func_call_param, but for class declarations -# -indent_func_ctor_var_param=false # { False, True } -# Same as indent_func_call_param, but for class variable constructors -# -indent_template_param=false # { False, True } -# Same as indent_func_call_param, but for templates -# -indent_func_param_double=false # { False, True } -# Double the indent for indent_func_xxx_param options -# -#indent_func_const Number -# Indentation column for standalone 'const' function decl/proto qualifier -# -#indent_func_throw Number -# Indentation column for standalone 'throw' function decl/proto qualifier -# -#indent_member Number -# The number of spaces to indent a continued '->' or '.' -# Usually set to 0, 1, or indent_columns. -# -#indent_member_single=false # false/true -# setting to true will indent lines broken at '.' or '->' by a single indent -# UO_indent_member option will not be effective if this is set to true. -# -#indent_sing_line_comments Number -# Spaces to indent single line ('//') comments on lines before code -# -indent_relative_single_line_comments=false # { False, True } -# If set, will indent trailing single line ('//') comments relative -# to the code instead of trying to keep the same absolute column -# -indent_switch_case=4 # Number -# Spaces to indent 'case' from 'switch' -# Usually 0 or indent_columns. -# -indent_case_shift=0 # Number -# Spaces to shift the 'case' line, without affecting any other lines -# Usually 0. -# -indent_case_brace=0 # Number -# Spaces to indent '{' from 'case'. -# By default, the brace will appear under the 'c' in case. -# Usually set to 0 or indent_columns. -# -indent_col1_comment=false # { False, True } -# Whether to indent comments found in first column -# -indent_label=-4 # Number -# How to indent goto labels -# >0: absolute column where 1 is the leftmost column -# <=0: subtract from brace indent -# Default=1 -# -indent_access_spec=-4 # Number -# Same as indent_label, but for access specifiers that are followed by a colon. Default=1 -# -#indent_access_spec_body { False, True } -# Indent the code after an access specifier by one level. -# If set, this option forces 'indent_access_spec=0' -# -indent_paren_nl=false # { False, True } -# If an open paren is followed by a newline, indent the next line so that it lines up after the open paren (not recommended) -# -#indent_paren_close Number -# Controls the indent of a close paren after a newline. -# 0: Indent to body level -# 1: Align under the open paren -# 2: Indent to the brace level -# -indent_comma_paren=false # { False, True } -# Controls the indent of a comma when inside a paren.If TRUE, aligns under the open paren -# -indent_bool_paren=false # { False, True } -# Controls the indent of a BOOL operator when inside a paren.If TRUE, aligns under the open paren -# -indent_first_bool_expr=false # { False, True } -# If 'indent_bool_paren' is true, controls the indent of the first expression. If TRUE, aligns the first expression to the following ones -# -indent_square_nl=false # { False, True } -# If an open square is followed by a newline, indent the next line so that it lines up after the open square (not recommended) -# -indent_preserve_sql=false # { False, True } -# Don't change the relative indent of ESQL/C 'EXEC SQL' bodies -# -#indent_align_assign { False, True } -# Align continued statements at the '='. Default=True -# If FALSE or the '=' is followed by a newline, the next line is indent one tab. -# -indent_align_paren=false # { False, True } -# Align continued statements at the '('. Default=True -# If FALSE or the '(' is not followed by a newline, the next line indent is one tab. -# -#indent_oc_block { False, True } -# Indent OC blocks at brace level instead of usual rules. -# -#indent_oc_block_msg Number -# Indent OC blocks in a message relative to the parameter name. -# 0=use indent_oc_block rules, 1+=spaces to indent -# -#indent_oc_msg_colon Number -# Minimum indent for subsequent parameters -# -#indent_oc_msg_prioritize_first_colon { False, True } -# If true, prioritize aligning with initial colon (and stripping spaces from lines, if necessary). -# Default=True. -# -indent_oc_block_msg_xcode_style=true # { False, True } -# If indent_oc_block_msg and this option are on, blocks will be indented the way that Xcode does by default (from keyword if the parameter is on its own line; otherwise, from the previous indentation level). -# -#indent_oc_block_msg_from_keyword { False, True } -# If indent_oc_block_msg and this option are on, blocks will be indented from where the brace is relative to a msg keyword. -# -#indent_oc_block_msg_from_colon { False, True } -# If indent_oc_block_msg and this option are on, blocks will be indented from where the brace is relative to a msg colon. -# -#indent_oc_block_msg_from_caret { False, True } -# If indent_oc_block_msg and this option are on, blocks will be indented from where the block caret is. -# -#indent_oc_block_msg_from_brace { False, True } -# If indent_oc_block_msg and this option are on, blocks will be indented from where the brace is. -# -#indent_min_vbrace_open Number -# When indenting after virtual brace open and newline add further spaces to reach this min. indent. -# -#indent_vbrace_open_on_tabstop { False, True } -# TRUE: When indenting after virtual brace open and newline add further spaces after regular indent to reach next tabstop. -# -#indent_token_after_brace { False, True } -# If true, a brace followed by another token (not a newline) will indent all contained lines to match the token. Default=True. -# -#indent_cpp_lambda_body { False, True } -# If true, cpp lambda body will be indented. -# -indent_off_after_return_new=true # { False, True } -# If true, the indentation of the chunks after a `return new` sequence will be set at return indentation column. -# -indent_single_after_return=true # { False, True } -# If true, the tokens after return are indented with regular single indentation.By default (false) the indentation is after the return token. -# -## -## Spacing options -## -# -sp_arith=add # { Ignore, Add, Remove, Force } -# Add or remove space around arithmetic operator '+', '-', '/', '*', etc -# also '>>>' '<<' '>>' '%' '|' -# -sp_assign=add # { Ignore, Add, Remove, Force } -# Add or remove space around assignment operator '=', '+=', etc -# -#sp_cpp_lambda_assign { Ignore, Add, Remove, Force } -# Add or remove space after the capture specification in C++11 lambda. -# -sp_assign_default=add # { Ignore, Add, Remove, Force } -# Add or remove space around assignment operator '=' in a prototype -# -#sp_before_assign { Ignore, Add, Remove, Force } -# Add or remove space before assignment operator '=', '+=', etc. Overrides sp_assign. -# -#sp_after_assign { Ignore, Add, Remove, Force } -# Add or remove space after assignment operator '=', '+=', etc. Overrides sp_assign. -# -#sp_enum_paren { Ignore, Add, Remove, Force } -# Add or remove space in 'NS_ENUM (' -# -sp_enum_assign=add # { Ignore, Add, Remove, Force } -# Add or remove space around assignment '=' in enum -# -#sp_enum_before_assign { Ignore, Add, Remove, Force } -# Add or remove space before assignment '=' in enum. Overrides sp_enum_assign. -# -#sp_enum_after_assign { Ignore, Add, Remove, Force } -# Add or remove space after assignment '=' in enum. Overrides sp_enum_assign. -# -sp_pp_concat=remove # { Ignore, Add, Remove, Force } -# Add or remove space around preprocessor '##' concatenation operator. Default=Add -# -sp_pp_stringify=remove # { Ignore, Add, Remove, Force } -# Add or remove space after preprocessor '#' stringify operator. Also affects the '#@' charizing operator. -# -#sp_before_pp_stringify { Ignore, Add, Remove, Force } -# Add or remove space before preprocessor '#' stringify operator as in '#define x(y) L#y'. -# -sp_bool=add # { Ignore, Add, Remove, Force } -# Add or remove space around boolean operators '&&' and '||' -# -sp_compare=add # { Ignore, Add, Remove, Force } -# Add or remove space around compare operator '<', '>', '==', etc -# -sp_inside_paren=remove # { Ignore, Add, Remove, Force } -# Add or remove space inside '(' and ')' -# -sp_paren_paren=remove # { Ignore, Add, Remove, Force } -# Add or remove space between nested parens: '((' vs ') )' -# -#sp_cparen_oparen { Ignore, Add, Remove, Force } -# Add or remove space between back-to-back parens: ')(' vs ') (' -# -sp_balance_nested_parens=false # { False, True } -# Whether to balance spaces inside nested parens -# -sp_paren_brace=force # { Ignore, Add, Remove, Force } -# Add or remove space between ')' and '{' -# -#sp_before_ptr_star { Ignore, Add, Remove, Force } -# Add or remove space before pointer star '*' -# -#sp_before_unnamed_ptr_star { Ignore, Add, Remove, Force } -# Add or remove space before pointer star '*' that isn't followed by a variable name -# If set to 'ignore', sp_before_ptr_star is used instead. -# -#sp_between_ptr_star { Ignore, Add, Remove, Force } -# Add or remove space between pointer stars '*' -# -#sp_after_ptr_star { Ignore, Add, Remove, Force } -# Add or remove space after pointer star '*', if followed by a word. -# -#sp_after_ptr_star_qualifier { Ignore, Add, Remove, Force } -# Add or remove space after pointer star '*', if followed by a qualifier. -# -#sp_after_ptr_star_func { Ignore, Add, Remove, Force } -# Add or remove space after a pointer star '*', if followed by a func proto/def. -# -#sp_ptr_star_paren { Ignore, Add, Remove, Force } -# Add or remove space after a pointer star '*', if followed by an open paren (function types). -# -#sp_before_ptr_star_func { Ignore, Add, Remove, Force } -# Add or remove space before a pointer star '*', if followed by a func proto/def. -# -#sp_before_byref { Ignore, Add, Remove, Force } -# Add or remove space before a reference sign '&' -# -#sp_before_unnamed_byref { Ignore, Add, Remove, Force } -# Add or remove space before a reference sign '&' that isn't followed by a variable name -# If set to 'ignore', sp_before_byref is used instead. -# -#sp_after_byref { Ignore, Add, Remove, Force } -# Add or remove space after reference sign '&', if followed by a word. -# -#sp_after_byref_func { Ignore, Add, Remove, Force } -# Add or remove space after a reference sign '&', if followed by a func proto/def. -# -#sp_before_byref_func { Ignore, Add, Remove, Force } -# Add or remove space before a reference sign '&', if followed by a func proto/def. -# -sp_after_type=ignore # { Ignore, Add, Remove, Force } -# Add or remove space between type and word. Default=Force -# -#sp_before_template_paren { Ignore, Add, Remove, Force } -# Add or remove space before the paren in the D constructs 'template Foo(' and 'class Foo('. -# -sp_template_angle=remove # { Ignore, Add, Remove, Force } -# Add or remove space in 'template <' vs 'template<'. -# If set to ignore, sp_before_angle is used. -# -sp_before_angle=remove # { Ignore, Add, Remove, Force } -# Add or remove space before '<>' -# -sp_inside_angle=remove # { Ignore, Add, Remove, Force } -# Add or remove space inside '<' and '>' -# -#sp_after_angle { Ignore, Add, Remove, Force } -# Add or remove space after '<>' -# -sp_angle_paren=remove # { Ignore, Add, Remove, Force } -# Add or remove space between '<>' and '(' as found in 'new List(foo);' -# -sp_angle_paren_empty=remove # { Ignore, Add, Remove, Force } -# Add or remove space between '<>' and '()' as found in 'new List();' -# -sp_angle_word=add # { Ignore, Add, Remove, Force } -# Add or remove space between '<>' and a word as in 'List m;' or 'template static ...' -# -sp_angle_shift=remove # { Ignore, Add, Remove, Force } -# Add or remove space between '>' and '>' in '>>' (template stuff C++/C# only). Default=Add -# -#sp_permit_cpp11_shift { False, True } -# Permit removal of the space between '>>' in 'foo >' (C++11 only). Default=False -# sp_angle_shift cannot remove the space without this option. -# -sp_before_sparen=force # { Ignore, Add, Remove, Force } -# Add or remove space before '(' of 'if', 'for', 'switch', 'while', etc. -# -sp_inside_sparen=remove # { Ignore, Add, Remove, Force } -# Add or remove space inside if-condition '(' and ')' -# -#sp_inside_sparen_close { Ignore, Add, Remove, Force } -# Add or remove space before if-condition ')'. Overrides sp_inside_sparen. -# -#sp_inside_sparen_open { Ignore, Add, Remove, Force } -# Add or remove space after if-condition '('. Overrides sp_inside_sparen. -# -sp_after_sparen=add # { Ignore, Add, Remove, Force } -# Add or remove space after ')' of 'if', 'for', 'switch', and 'while', etc. -# -sp_sparen_brace=force # { Ignore, Add, Remove, Force } -# Add or remove space between ')' and '{' of 'if', 'for', 'switch', and 'while', etc. -# -#sp_invariant_paren { Ignore, Add, Remove, Force } -# Add or remove space between 'invariant' and '(' in the D language. -# -#sp_after_invariant_paren { Ignore, Add, Remove, Force } -# Add or remove space after the ')' in 'invariant (C) c' in the D language. -# -sp_special_semi=force # { Ignore, Add, Remove, Force } -# Add or remove space before empty statement ';' on 'if', 'for' and 'while' -# -sp_before_semi=remove # { Ignore, Add, Remove, Force } -# Add or remove space before ';'. Default=Remove -# -sp_before_semi_for=remove # { Ignore, Add, Remove, Force } -# Add or remove space before ';' in non-empty 'for' statements -# -sp_before_semi_for_empty=remove # { Ignore, Add, Remove, Force } -# Add or remove space before a semicolon of an empty part of a for statement. -# -sp_after_semi=add # { Ignore, Add, Remove, Force } -# Add or remove space after ';', except when followed by a comment. Default=Add -# -sp_after_semi_for=force # { Ignore, Add, Remove, Force } -# Add or remove space after ';' in non-empty 'for' statements. Default=Force -# -sp_after_semi_for_empty=remove # { Ignore, Add, Remove, Force } -# Add or remove space after the final semicolon of an empty part of a for statement: for ( ; ; ). -# -sp_before_square=remove # { Ignore, Add, Remove, Force } -# Add or remove space before '[' (except '[]') -# -sp_before_squares=remove # { Ignore, Add, Remove, Force } -# Add or remove space before '[]' -# -sp_inside_square=remove # { Ignore, Add, Remove, Force } -# Add or remove space inside a non-empty '[' and ']' -# -sp_after_comma=add # { Ignore, Add, Remove, Force } -# Add or remove space after ',' -# -sp_before_comma=ignore # { Ignore, Add, Remove, Force } -# Add or remove space before ','. Default=Remove -# -sp_after_mdatype_commas=remove # { Ignore, Add, Remove, Force } -# Add or remove space between ',' and ']' in multidimensional array type 'int[,,]' -# -sp_before_mdatype_commas=remove # { Ignore, Add, Remove, Force } -# Add or remove space between '[' and ',' in multidimensional array type 'int[,,]' -# -sp_between_mdatype_commas=remove # { Ignore, Add, Remove, Force } -# Add or remove space between ',' in multidimensional array type 'int[,,]' -# -sp_paren_comma=remove # { Ignore, Add, Remove, Force } -# Add or remove space between an open paren and comma: '(,' vs '( ,'. Default=Force -# -#sp_before_ellipsis { Ignore, Add, Remove, Force } -# Add or remove space before the variadic '...' when preceded by a non-punctuator -# -sp_after_class_colon=force # { Ignore, Add, Remove, Force } -# Add or remove space after class ':' -# -sp_before_class_colon=force # { Ignore, Add, Remove, Force } -# Add or remove space before class ':' -# -#sp_after_constr_colon { Ignore, Add, Remove, Force } -# Add or remove space after class constructor ':' -# -#sp_before_constr_colon { Ignore, Add, Remove, Force } -# Add or remove space before class constructor ':' -# -sp_before_case_colon=remove # { Ignore, Add, Remove, Force } -# Add or remove space before case ':'. Default=Remove -# -sp_after_operator=remove # { Ignore, Add, Remove, Force } -# Add or remove space between 'operator' and operator sign -# -sp_after_operator_sym=remove # { Ignore, Add, Remove, Force } -# Add or remove space between the operator symbol and the open paren, as in 'operator ++(' -# -sp_after_operator_sym_empty=remove # { Ignore, Add, Remove, Force } -# Add or remove space between the operator symbol and the open paren when the operator has no arguments, as in 'operator *()' -# -sp_after_cast=remove # { Ignore, Add, Remove, Force } -# Add or remove space after C/D cast, i.e. 'cast(int)a' vs 'cast(int) a' or '(int)a' vs '(int) a' -# -sp_inside_paren_cast=remove # { Ignore, Add, Remove, Force } -# Add or remove spaces inside cast parens -# -sp_cpp_cast_paren=remove # { Ignore, Add, Remove, Force } -# Add or remove space between the type and open paren in a C++ cast, i.e. 'int(exp)' vs 'int (exp)' -# -sp_sizeof_paren=remove # { Ignore, Add, Remove, Force } -# Add or remove space between 'sizeof' and '(' -# -#sp_after_tag { Ignore, Add, Remove, Force } -# Add or remove space after the tag keyword (Pawn) -# -sp_inside_braces_enum=add # { Ignore, Add, Remove, Force } -# Add or remove space inside enum '{' and '}' -# -#sp_inside_braces_struct { Ignore, Add, Remove, Force } -# Add or remove space inside struct/union '{' and '}' -# -#sp_inside_braces { Ignore, Add, Remove, Force } -# Add or remove space inside '{' and '}' -# -sp_inside_braces_empty=remove # { Ignore, Add, Remove, Force } -# Add or remove space inside '{}' -# -sp_type_func=ignore # { Ignore, Add, Remove, Force } -# Add or remove space between return type and function name -# A minimum of 1 is forced except for pointer return types. -# -sp_func_proto_paren=remove # { Ignore, Add, Remove, Force } -# Add or remove space between function name and '(' on function declaration -# -#sp_func_proto_paren_empty { Ignore, Add, Remove, Force } -# Add or remove space between function name and '()' on function declaration without parameters -# -sp_func_def_paren=remove # { Ignore, Add, Remove, Force } -# Add or remove space between function name and '(' on function definition -# -#sp_func_def_paren_empty { Ignore, Add, Remove, Force } -# Add or remove space between function name and '()' on function definition without parameters -# -sp_inside_fparens=remove # { Ignore, Add, Remove, Force } -# Add or remove space inside empty function '()' -# -sp_inside_fparen=remove # { Ignore, Add, Remove, Force } -# Add or remove space inside function '(' and ')' -# -#sp_inside_tparen { Ignore, Add, Remove, Force } -# Add or remove space inside the first parens in the function type: 'void (*x)(...)' -# -#sp_after_tparen_close { Ignore, Add, Remove, Force } -# Add or remove between the parens in the function type: 'void (*x)(...)' -# -#sp_square_fparen { Ignore, Add, Remove, Force } -# Add or remove space between ']' and '(' when part of a function call. -# -sp_fparen_brace=add # { Ignore, Add, Remove, Force } -# Add or remove space between ')' and '{' of function -# -#sp_fparen_dbrace { Ignore, Add, Remove, Force } -# Java: Add or remove space between ')' and '{{' of double brace initializer. -# -sp_func_call_paren=remove # { Ignore, Add, Remove, Force } -# Add or remove space between function name and '(' on function calls -# -sp_func_call_paren_empty=remove # { Ignore, Add, Remove, Force } -# Add or remove space between function name and '()' on function calls without parameters. -# If set to 'ignore' (the default), sp_func_call_paren is used. -# -sp_func_call_user_paren=remove # { Ignore, Add, Remove, Force } -# Add or remove space between the user function name and '(' on function calls -# You need to set a keyword to be a user function, like this: 'set func_call_user _' in the config file. -# -sp_func_class_paren=remove # { Ignore, Add, Remove, Force } -# Add or remove space between a constructor/destructor and the open paren -# -#sp_func_class_paren_empty { Ignore, Add, Remove, Force } -# Add or remove space between a constructor without parameters or destructor and '()' -# -sp_return_paren=add # { Ignore, Add, Remove, Force } -# Add or remove space between 'return' and '(' -# -#sp_attribute_paren { Ignore, Add, Remove, Force } -# Add or remove space between '__attribute__' and '(' -# -sp_defined_paren=remove # { Ignore, Add, Remove, Force } -# Add or remove space between 'defined' and '(' in '#if defined (FOO)' -# -sp_throw_paren=add # { Ignore, Add, Remove, Force } -# Add or remove space between 'throw' and '(' in 'throw (something)' -# -#sp_after_throw { Ignore, Add, Remove, Force } -# Add or remove space between 'throw' and anything other than '(' as in '@throw [...];' -# -sp_catch_paren=add # { Ignore, Add, Remove, Force } -# Add or remove space between 'catch' and '(' in 'catch (something) { }' -# If set to ignore, sp_before_sparen is used. -# -#sp_version_paren { Ignore, Add, Remove, Force } -# Add or remove space between 'version' and '(' in 'version (something) { }' (D language) -# If set to ignore, sp_before_sparen is used. -# -#sp_scope_paren { Ignore, Add, Remove, Force } -# Add or remove space between 'scope' and '(' in 'scope (something) { }' (D language) -# If set to ignore, sp_before_sparen is used. -# -#sp_super_paren { Ignore, Add, Remove, Force } -# Add or remove space between 'super' and '(' in 'super (something)'. Default=Remove -# -#sp_this_paren { Ignore, Add, Remove, Force } -# Add or remove space between 'this' and '(' in 'this (something)'. Default=Remove -# -#sp_macro { Ignore, Add, Remove, Force } -# Add or remove space between macro and value -# -#sp_macro_func { Ignore, Add, Remove, Force } -# Add or remove space between macro function ')' and value -# -#sp_else_brace { Ignore, Add, Remove, Force } -# Add or remove space between 'else' and '{' if on the same line -# -#sp_brace_else { Ignore, Add, Remove, Force } -# Add or remove space between '}' and 'else' if on the same line -# -sp_brace_typedef=add # { Ignore, Add, Remove, Force } -# Add or remove space between '}' and the name of a typedef on the same line -# -#sp_catch_brace { Ignore, Add, Remove, Force } -# Add or remove space between 'catch' and '{' if on the same line -# -#sp_brace_catch { Ignore, Add, Remove, Force } -# Add or remove space between '}' and 'catch' if on the same line -# -#sp_finally_brace { Ignore, Add, Remove, Force } -# Add or remove space between 'finally' and '{' if on the same line -# -#sp_brace_finally { Ignore, Add, Remove, Force } -# Add or remove space between '}' and 'finally' if on the same line -# -#sp_try_brace { Ignore, Add, Remove, Force } -# Add or remove space between 'try' and '{' if on the same line -# -sp_getset_brace=add # { Ignore, Add, Remove, Force } -# Add or remove space between get/set and '{' if on the same line -# -#sp_word_brace { Ignore, Add, Remove, Force } -# Add or remove space between a variable and '{' for C++ uniform initialization. Default=Add -# -#sp_word_brace_ns { Ignore, Add, Remove, Force } -# Add or remove space between a variable and '{' for a namespace. Default=Add -# -# bug: UNI-10496 -#sp_before_dc=remove # { Ignore, Add, Remove, Force } -# Add or remove space before the '::' operator -# -sp_after_dc=remove # { Ignore, Add, Remove, Force } -# Add or remove space after the '::' operator -# -#sp_d_array_colon { Ignore, Add, Remove, Force } -# Add or remove around the D named array initializer ':' operator -# -sp_not=remove # { Ignore, Add, Remove, Force } -# Add or remove space after the '!' (not) operator. Default=Remove -# -sp_inv=remove # { Ignore, Add, Remove, Force } -# Add or remove space after the '~' (invert) operator. Default=Remove -# -sp_addr=remove # { Ignore, Add, Remove, Force } -# Add or remove space after the '&' (address-of) operator. Default=Remove -# This does not affect the spacing after a '&' that is part of a type. -# -sp_member=remove # { Ignore, Add, Remove, Force } -# Add or remove space around the '.' or '->' operators. Default=Remove -# -sp_deref=remove # { Ignore, Add, Remove, Force } -# Add or remove space after the '*' (dereference) operator. Default=Remove -# This does not affect the spacing after a '*' that is part of a type. -# -sp_sign=remove # { Ignore, Add, Remove, Force } -# Add or remove space after '+' or '-', as in 'x = -5' or 'y = +7'. Default=Remove -# -sp_incdec=remove # { Ignore, Add, Remove, Force } -# Add or remove space before or after '++' and '--', as in '(--x)' or 'y++;'. Default=Remove -# -sp_before_nl_cont=add # { Ignore, Add, Remove, Force } -# Add or remove space before a backslash-newline at the end of a line. Default=Add -# -sp_after_oc_scope=force # { Ignore, Add, Remove, Force } -# Add or remove space after the scope '+' or '-', as in '-(void) foo;' or '+(int) bar;' -# -sp_after_oc_colon=remove # { Ignore, Add, Remove, Force } -# Add or remove space after the colon in message specs -# '-(int) f:(int) x;' vs '-(int) f: (int) x;' -# -sp_before_oc_colon=remove # { Ignore, Add, Remove, Force } -# Add or remove space before the colon in message specs -# '-(int) f: (int) x;' vs '-(int) f : (int) x;' -# -sp_after_oc_dict_colon=force # { Ignore, Add, Remove, Force } -# Add or remove space after the colon in immutable dictionary expression -# 'NSDictionary *test = @{@"foo" :@"bar"};' -# -sp_before_oc_dict_colon=remove # { Ignore, Add, Remove, Force } -# Add or remove space before the colon in immutable dictionary expression -# 'NSDictionary *test = @{@"foo" :@"bar"};' -# -sp_after_send_oc_colon=force # { Ignore, Add, Remove, Force } -# Add or remove space after the colon in message specs -# '[object setValue:1];' vs '[object setValue: 1];' -# -sp_before_send_oc_colon=remove # { Ignore, Add, Remove, Force } -# Add or remove space before the colon in message specs -# '[object setValue:1];' vs '[object setValue :1];' -# -sp_after_oc_type=remove # { Ignore, Add, Remove, Force } -# Add or remove space after the (type) in message specs -# '-(int)f: (int) x;' vs '-(int)f: (int)x;' -# -sp_after_oc_return_type=remove # { Ignore, Add, Remove, Force } -# Add or remove space after the first (type) in message specs -# '-(int) f:(int)x;' vs '-(int)f:(int)x;' -# -sp_after_oc_at_sel=remove # { Ignore, Add, Remove, Force } -# Add or remove space between '@selector' and '(' -# '@selector(msgName)' vs '@selector (msgName)' -# Also applies to @protocol() constructs -# -#sp_after_oc_at_sel_parens { Ignore, Add, Remove, Force } -# Add or remove space between '@selector(x)' and the following word -# '@selector(foo) a:' vs '@selector(foo)a:' -# -sp_inside_oc_at_sel_parens=remove # { Ignore, Add, Remove, Force } -# Add or remove space inside '@selector' parens -# '@selector(foo)' vs '@selector( foo )' -# Also applies to @protocol() constructs -# -#sp_before_oc_block_caret { Ignore, Add, Remove, Force } -# Add or remove space before a block pointer caret -# '^int (int arg){...}' vs. ' ^int (int arg){...}' -# -#sp_after_oc_block_caret { Ignore, Add, Remove, Force } -# Add or remove space after a block pointer caret -# '^int (int arg){...}' vs. '^ int (int arg){...}' -# -#sp_after_oc_msg_receiver { Ignore, Add, Remove, Force } -# Add or remove space between the receiver and selector in a message. -# '[receiver selector ...]' -# -#sp_after_oc_property { Ignore, Add, Remove, Force } -# Add or remove space after @property. -# -sp_cond_colon=add # { Ignore, Add, Remove, Force } -# Add or remove space around the ':' in 'b ? t : f' -# -#sp_cond_colon_before { Ignore, Add, Remove, Force } -# Add or remove space before the ':' in 'b ? t : f'. Overrides sp_cond_colon. -# -#sp_cond_colon_after { Ignore, Add, Remove, Force } -# Add or remove space after the ':' in 'b ? t : f'. Overrides sp_cond_colon. -# -sp_cond_question=add # { Ignore, Add, Remove, Force } -# Add or remove space around the '?' in 'b ? t : f' -# -#sp_cond_question_before { Ignore, Add, Remove, Force } -# Add or remove space before the '?' in 'b ? t : f'. Overrides sp_cond_question. -# -#sp_cond_question_after { Ignore, Add, Remove, Force } -# Add or remove space after the '?' in 'b ? t : f'. Overrides sp_cond_question. -# -#sp_cond_ternary_short { Ignore, Add, Remove, Force } -# In the abbreviated ternary form (a ?: b), add/remove space between ? and :.'. Overrides all other sp_cond_* options. -# -sp_case_label=ignore # { Ignore, Add, Remove, Force } -# Fix the spacing between 'case' and the label. Only 'ignore' and 'force' make sense here. -# -#sp_range { Ignore, Add, Remove, Force } -# Control the space around the D '..' operator. -# -#sp_after_for_colon { Ignore, Add, Remove, Force } -# Control the spacing after ':' in 'for (TYPE VAR : EXPR)' -# -#sp_before_for_colon { Ignore, Add, Remove, Force } -# Control the spacing before ':' in 'for (TYPE VAR : EXPR)' -# -#sp_extern_paren { Ignore, Add, Remove, Force } -# Control the spacing in 'extern (C)' (D) -# -#sp_cmt_cpp_start { Ignore, Add, Remove, Force } -# Control the space after the opening of a C++ comment '// A' vs '//A' -# -#sp_cmt_cpp_doxygen { False, True } -# TRUE: If space is added with sp_cmt_cpp_start, do it after doxygen sequences like '///', '///<', '//!' and '//!<'. -# -#sp_cmt_cpp_qttr { False, True } -# TRUE: If space is added with sp_cmt_cpp_start, do it after Qt translator or meta-data comments like '//:', '//=', and '//~'. -# -#sp_endif_cmt { Ignore, Add, Remove, Force } -# Controls the spaces between #else or #endif and a trailing comment -# -sp_after_new=force # { Ignore, Add, Remove, Force } -# Controls the spaces after 'new', 'delete' and 'delete[]' -# -sp_between_new_paren=remove # { Ignore, Add, Remove, Force } -# Controls the spaces between new and '(' in 'new()' -# -#sp_before_tr_emb_cmt { Ignore, Add, Remove, Force } -# Controls the spaces before a trailing or embedded comment -# -#sp_num_before_tr_emb_cmt Number -# Number of spaces before a trailing or embedded comment -# -#sp_annotation_paren { Ignore, Add, Remove, Force } -# Control space between a Java annotation and the open paren. -# -sp_skip_vbrace_tokens=true # { False, True } -# If true, vbrace tokens are dropped to the previous token and skipped. -# -## -## Code alignment (not left column spaces/tabs) -## -# -align_keep_tabs=false # { False, True } -# Whether to keep non-indenting tabs -# -align_with_tabs=false # { False, True } -# Whether to use tabs for aligning -# -align_on_tabstop=false # { False, True } -# Whether to bump out to the next tab when aligning -# -align_number_right=false # { False, True } -# Whether to left-align numbers -# -#align_keep_extra_space { False, True } -# Whether to keep whitespace not required for alignment. -# -align_func_params=false # { False, True } -# Align variable definitions in prototypes and functions -# -align_same_func_call_params=false # { False, True } -# Align parameters in single-line functions that have the same name. -# The function names must already be aligned with each other. -# -#align_var_def_span Number -# The span for aligning variable definitions (0=don't align) -# -#align_var_def_star_style Number -# How to align the star in variable definitions. -# 0=Part of the type 'void * foo;' -# 1=Part of the variable 'void *foo;' -# 2=Dangling 'void *foo;' -# -#align_var_def_amp_style Number -# How to align the '&' in variable definitions. -# 0=Part of the type -# 1=Part of the variable -# 2=Dangling -# -#align_var_def_thresh Number -# The threshold for aligning variable definitions (0=no limit) -# -#align_var_def_gap Number -# The gap for aligning variable definitions -# -align_var_def_colon=false # { False, True } -# Whether to align the colon in struct bit fields -# -align_var_def_attribute=false # { False, True } -# Whether to align any attribute after the variable name -# -align_var_def_inline=false # { False, True } -# Whether to align inline struct/enum/union variable definitions -# -#align_assign_span Number -# The span for aligning on '=' in assignments (0=don't align) -# -#align_assign_thresh Number -# The threshold for aligning on '=' in assignments (0=no limit) -# -#align_enum_equ_span Number -# The span for aligning on '=' in enums (0=don't align) -# -#align_enum_equ_thresh Number -# The threshold for aligning on '=' in enums (0=no limit) -# -#align_var_struct_span Number -# The span for aligning struct/union (0=don't align) -# -#align_var_struct_thresh Number -# The threshold for aligning struct/union member definitions (0=no limit) -# -#align_var_struct_gap Number -# The gap for aligning struct/union member definitions -# -#align_struct_init_span Number -# The span for aligning struct initializer values (0=don't align) -# -#align_typedef_gap Number -# The minimum space between the type and the synonym of a typedef -# -#align_typedef_span Number -# The span for aligning single-line typedefs (0=don't align) -# -#align_typedef_func Number -# How to align typedef'd functions with other typedefs -# 0: Don't mix them at all -# 1: align the open paren with the types -# 2: align the function type name with the other type names -# -#align_typedef_star_style Number -# Controls the positioning of the '*' in typedefs. Just try it. -# 0: Align on typedef type, ignore '*' -# 1: The '*' is part of type name: typedef int *pint; -# 2: The '*' is part of the type, but dangling: typedef int *pint; -# -#align_typedef_amp_style Number -# Controls the positioning of the '&' in typedefs. Just try it. -# 0: Align on typedef type, ignore '&' -# 1: The '&' is part of type name: typedef int &pint; -# 2: The '&' is part of the type, but dangling: typedef int &pint; -# -#align_right_cmt_span Number -# The span for aligning comments that end lines (0=don't align) -# -align_right_cmt_mix=false # { False, True } -# If aligning comments, mix with comments after '}' and #endif with less than 3 spaces before the comment -# -#align_right_cmt_gap Number -# If a trailing comment is more than this number of columns away from the text it follows, -# it will qualify for being aligned. This has to be > 0 to do anything. -# -#align_right_cmt_at_col Number -# Align trailing comment at or beyond column N; 'pulls in' comments as a bonus side effect (0=ignore) -# -#align_func_proto_span Number -# The span for aligning function prototypes (0=don't align) -# -#align_func_proto_gap Number -# Minimum gap between the return type and the function name. -# -align_on_operator=false # { False, True } -# Align function protos on the 'operator' keyword instead of what follows -# -align_mix_var_proto=false # { False, True } -# Whether to mix aligning prototype and variable declarations. -# If true, align_var_def_XXX options are used instead of align_func_proto_XXX options. -# -align_single_line_func=false # { False, True } -# Align single-line functions with function prototypes, uses align_func_proto_span -# -align_single_line_brace=false # { False, True } -# Aligning the open brace of single-line functions. -# Requires align_single_line_func=true, uses align_func_proto_span -# -#align_single_line_brace_gap Number -# Gap for align_single_line_brace. -# -#align_oc_msg_spec_span Number -# The span for aligning ObjC msg spec (0=don't align) -# -align_nl_cont=false # { False, True } -# Whether to align macros wrapped with a backslash and a newline. -# This will not work right if the macro contains a multi-line comment. -# -#align_pp_define_together { False, True } -# # Align macro functions and variables together -# -#align_pp_define_gap Number -# The minimum space between label and value of a preprocessor define -# -#align_pp_define_span Number -# The span for aligning on '#define' bodies (0=don't align, other=number of lines including comments between blocks) -# -align_left_shift=false # { False, True } -# Align lines that start with '<<' with previous '<<'. Default=True -# -#align_asm_colon { False, True } -# Align text after asm volatile () colons. -# -#align_oc_msg_colon_span Number -# Span for aligning parameters in an Obj-C message call on the ':' (0=don't align) -# -#align_oc_msg_colon_first { False, True } -# If true, always align with the first parameter, even if it is too short. -# -#align_oc_decl_colon { False, True } -# Aligning parameters in an Obj-C '+' or '-' declaration on the ':' -# -## -## Newline adding and removing options -## -# -nl_collapse_empty_body=false # { False, True } -# Whether to collapse empty blocks between '{' and '}' -# -nl_assign_leave_one_liners=true # { False, True } -# Don't split one-line braced assignments - 'foo_t f = { 1, 2 };' -# -nl_class_leave_one_liners=true # { False, True } -# Don't split one-line braced statements inside a class xx { } body -# -nl_enum_leave_one_liners=true # { False, True } -# Don't split one-line enums: 'enum foo { BAR = 15 };' -# -nl_getset_leave_one_liners=true # { False, True } -# Don't split one-line get or set functions -# -nl_func_leave_one_liners=true # { False, True } -# Don't split one-line function definitions - 'int foo() { return 0; }' -# -nl_cpp_lambda_leave_one_liners=true # { False, True } -# Don't split one-line C++11 lambdas - '[]() { return 0; }' -# -nl_if_leave_one_liners=false # { False, True } -# Don't split one-line if/else statements - 'if(a) b++;' -# -#nl_while_leave_one_liners { False, True } -# Don't split one-line while statements - 'while(a) b++;' -# -nl_oc_msg_leave_one_liner=true # { False, True } -# Don't split one-line OC messages -# -#nl_oc_block_brace { Ignore, Add, Remove, Force } -# Add or remove newline between Objective-C block signature and '{' -# -nl_start_of_file=remove # { Ignore, Add, Remove, Force } -# Add or remove newlines at the start of the file -# -#nl_start_of_file_min Number -# The number of newlines at the start of the file (only used if nl_start_of_file is 'add' or 'force' -# -nl_end_of_file=force # { Ignore, Add, Remove, Force } -# Add or remove newline at the end of the file -# -nl_end_of_file_min=1 # Number -# The number of newlines at the end of the file (only used if nl_end_of_file is 'add' or 'force') -# -nl_assign_brace=force # { Ignore, Add, Remove, Force } -# Add or remove newline between '=' and '{' -# -#nl_assign_square { Ignore, Add, Remove, Force } -# Add or remove newline between '=' and '[' (D only) -# -#nl_after_square_assign { Ignore, Add, Remove, Force } -# Add or remove newline after '= [' (D only). Will also affect the newline before the ']' -# -#nl_func_var_def_blk Number -# The number of blank lines after a block of variable definitions at the top of a function body -# 0 = No change (default) -# -#nl_typedef_blk_start Number -# The number of newlines before a block of typedefs -# 0 = No change (default) -# the option 'nl_after_access_spec' takes preference over 'nl_typedef_blk_start' -# -#nl_typedef_blk_end Number -# The number of newlines after a block of typedefs -# 0 = No change (default) -# -#nl_typedef_blk_in Number -# The maximum consecutive newlines within a block of typedefs -# 0 = No change (default) -# -#nl_var_def_blk_start Number -# The number of newlines before a block of variable definitions not at the top of a function body -# 0 = No change (default) -# the option 'nl_after_access_spec' takes preference over 'nl_var_def_blk_start' -# -#nl_var_def_blk_end Number -# The number of newlines after a block of variable definitions not at the top of a function body -# 0 = No change (default) -# -#nl_var_def_blk_in Number -# The maximum consecutive newlines within a block of variable definitions -# 0 = No change (default) -# -#nl_fcall_brace { Ignore, Add, Remove, Force } -# Add or remove newline between a function call's ')' and '{', as in: -# list_for_each(item, &list) { } -# -nl_enum_brace=force # { Ignore, Add, Remove, Force } -# Add or remove newline between 'enum' and '{' -# -nl_struct_brace=force # { Ignore, Add, Remove, Force } -# Add or remove newline between 'struct and '{' -# -nl_union_brace=force # { Ignore, Add, Remove, Force } -# Add or remove newline between 'union' and '{' -# -nl_if_brace=force # { Ignore, Add, Remove, Force } -# Add or remove newline between 'if' and '{' -# -nl_brace_else=force # { Ignore, Add, Remove, Force } -# Add or remove newline between '}' and 'else' -# -#nl_elseif_brace { Ignore, Add, Remove, Force } -# Add or remove newline between 'else if' and '{' -# If set to ignore, nl_if_brace is used instead -# -nl_else_brace=force # { Ignore, Add, Remove, Force } -# Add or remove newline between 'else' and '{' -# -nl_else_if=remove # { Ignore, Add, Remove, Force } -# Add or remove newline between 'else' and 'if' -# -nl_brace_finally=force # { Ignore, Add, Remove, Force } -# Add or remove newline between '}' and 'finally' -# -nl_finally_brace=force # { Ignore, Add, Remove, Force } -# Add or remove newline between 'finally' and '{' -# -nl_try_brace=force # { Ignore, Add, Remove, Force } -# Add or remove newline between 'try' and '{' -# -nl_getset_brace=force # { Ignore, Add, Remove, Force } -# Add or remove newline between get/set and '{' -# -nl_for_brace=force # { Ignore, Add, Remove, Force } -# Add or remove newline between 'for' and '{' -# -nl_catch_brace=force # { Ignore, Add, Remove, Force } -# Add or remove newline between 'catch' and '{' -# -nl_brace_catch=force # { Ignore, Add, Remove, Force } -# Add or remove newline between '}' and 'catch' -# -#nl_brace_square { Ignore, Add, Remove, Force } -# Add or remove newline between '}' and ']' -# -#nl_brace_fparen { Ignore, Add, Remove, Force } -# Add or remove newline between '}' and ')' in a function invocation -# -nl_while_brace=force # { Ignore, Add, Remove, Force } -# Add or remove newline between 'while' and '{' -# -#nl_scope_brace { Ignore, Add, Remove, Force } -# Add or remove newline between 'scope (x)' and '{' (D) -# -#nl_unittest_brace { Ignore, Add, Remove, Force } -# Add or remove newline between 'unittest' and '{' (D) -# -#nl_version_brace { Ignore, Add, Remove, Force } -# Add or remove newline between 'version (x)' and '{' (D) -# -nl_using_brace=force # { Ignore, Add, Remove, Force } -# Add or remove newline between 'using' and '{' -# -nl_brace_brace=ignore # { Ignore, Add, Remove, Force } -# Add or remove newline between two open or close braces. -# Due to general newline/brace handling, REMOVE may not work. -# -nl_do_brace=force # { Ignore, Add, Remove, Force } -# Add or remove newline between 'do' and '{' -# -nl_brace_while=force # { Ignore, Add, Remove, Force } -# Add or remove newline between '}' and 'while' of 'do' statement -# -nl_switch_brace=force # { Ignore, Add, Remove, Force } -# Add or remove newline between 'switch' and '{' -# -#nl_synchronized_brace { Ignore, Add, Remove, Force } -# Add or remove newline between 'synchronized' and '{' -# -nl_multi_line_cond=false # { False, True } -# Add a newline between ')' and '{' if the ')' is on a different line than the if/for/etc. -# Overrides nl_for_brace, nl_if_brace, nl_switch_brace, nl_while_switch and nl_catch_brace. -# -#nl_multi_line_define { False, True } -# Force a newline in a define after the macro name for multi-line defines. -# -nl_before_case=false # { False, True } -# Whether to put a newline before 'case' statement, not after the first 'case' -# -#nl_before_throw { Ignore, Add, Remove, Force } -# Add or remove newline between ')' and 'throw' -# -nl_after_case=false # { False, True } -# Whether to put a newline after 'case' statement -# -nl_case_colon_brace=force # { Ignore, Add, Remove, Force } -# Add or remove a newline between a case ':' and '{'. Overrides nl_after_case. -# -nl_namespace_brace=force # { Ignore, Add, Remove, Force } -# Newline between namespace and { -# -nl_template_class=ignore # { Ignore, Add, Remove, Force } -# Add or remove newline between 'template<>' and whatever follows. -# -nl_class_brace=force # { Ignore, Add, Remove, Force } -# Add or remove newline between 'class' and '{' -# -#nl_class_init_args { Ignore, Add, Remove, Force } -# Add or remove newline before/after each ',' in the base class list, -# (tied to pos_class_comma). -# -#nl_constr_init_args { Ignore, Add, Remove, Force } -# Add or remove newline after each ',' in the constructor member initialization. -# Related to nl_constr_colon, pos_constr_colon and pos_constr_comma. -# -#nl_enum_own_lines { Ignore, Add, Remove, Force } -# Add or remove newline before first element, after comma, and after last element in enum -# -#nl_func_type_name { Ignore, Add, Remove, Force } -# Add or remove newline between return type and function name in a function definition -# -#nl_func_type_name_class { Ignore, Add, Remove, Force } -# Add or remove newline between return type and function name inside a class {} -# Uses nl_func_type_name or nl_func_proto_type_name if set to ignore. -# -#nl_func_class_scope { Ignore, Add, Remove, Force } -# Add or remove newline between class specification and '::' in 'void A::f() { }' -# Only appears in separate member implementation (does not appear with in-line implmementation) -# -#nl_func_scope_name { Ignore, Add, Remove, Force } -# Add or remove newline between function scope and name -# Controls the newline after '::' in 'void A::f() { }' -# -#nl_func_proto_type_name { Ignore, Add, Remove, Force } -# Add or remove newline between return type and function name in a prototype -# -#nl_func_paren { Ignore, Add, Remove, Force } -# Add or remove newline between a function name and the opening '(' in the declaration -# -#nl_func_def_paren { Ignore, Add, Remove, Force } -# Add or remove newline between a function name and the opening '(' in the definition -# -#nl_func_decl_start { Ignore, Add, Remove, Force } -# Add or remove newline after '(' in a function declaration -# -#nl_func_def_start { Ignore, Add, Remove, Force } -# Add or remove newline after '(' in a function definition -# -#nl_func_decl_start_single { Ignore, Add, Remove, Force } -# Overrides nl_func_decl_start when there is only one parameter. -# -#nl_func_def_start_single { Ignore, Add, Remove, Force } -# Overrides nl_func_def_start when there is only one parameter. -# -#nl_func_decl_start_multi_line { False, True } -# Whether to add newline after '(' in a function declaration if '(' and ')' are in different lines. -# -#nl_func_def_start_multi_line { False, True } -# Whether to add newline after '(' in a function definition if '(' and ')' are in different lines. -# -#nl_func_decl_args { Ignore, Add, Remove, Force } -# Add or remove newline after each ',' in a function declaration -# -#nl_func_def_args { Ignore, Add, Remove, Force } -# Add or remove newline after each ',' in a function definition -# -#nl_func_decl_args_multi_line { False, True } -# Whether to add newline after each ',' in a function declaration if '(' and ')' are in different lines. -# -#nl_func_def_args_multi_line { False, True } -# Whether to add newline after each ',' in a function definition if '(' and ')' are in different lines. -# -#nl_func_decl_end { Ignore, Add, Remove, Force } -# Add or remove newline before the ')' in a function declaration -# -#nl_func_def_end { Ignore, Add, Remove, Force } -# Add or remove newline before the ')' in a function definition -# -#nl_func_decl_end_single { Ignore, Add, Remove, Force } -# Overrides nl_func_decl_end when there is only one parameter. -# -#nl_func_def_end_single { Ignore, Add, Remove, Force } -# Overrides nl_func_def_end when there is only one parameter. -# -#nl_func_decl_end_multi_line { False, True } -# Whether to add newline before ')' in a function declaration if '(' and ')' are in different lines. -# -#nl_func_def_end_multi_line { False, True } -# Whether to add newline before ')' in a function definition if '(' and ')' are in different lines. -# -#nl_func_decl_empty { Ignore, Add, Remove, Force } -# Add or remove newline between '()' in a function declaration. -# -#nl_func_def_empty { Ignore, Add, Remove, Force } -# Add or remove newline between '()' in a function definition. -# -#nl_func_call_start_multi_line { False, True } -# Whether to add newline after '(' in a function call if '(' and ')' are in different lines. -# -#nl_func_call_args_multi_line { False, True } -# Whether to add newline after each ',' in a function call if '(' and ')' are in different lines. -# -#nl_func_call_end_multi_line { False, True } -# Whether to add newline before ')' in a function call if '(' and ')' are in different lines. -# -#nl_oc_msg_args { False, True } -# Whether to put each OC message parameter on a separate line -# See nl_oc_msg_leave_one_liner -# -nl_fdef_brace=force # { Ignore, Add, Remove, Force } -# Add or remove newline between function signature and '{' -# -#nl_cpp_ldef_brace { Ignore, Add, Remove, Force } -# Add or remove newline between C++11 lambda signature and '{' -# -#nl_return_expr { Ignore, Add, Remove, Force } -# Add or remove a newline between the return keyword and return expression. -# -nl_after_semicolon=false # { False, True } -# Whether to put a newline after semicolons, except in 'for' statements -# -#nl_paren_dbrace_open { Ignore, Add, Remove, Force } -# Java: Control the newline between the ')' and '{{' of the double brace initializer. -# -nl_after_brace_open=false # { False, True } -# Whether to put a newline after brace open. -# This also adds a newline before the matching brace close. -# -nl_after_brace_open_cmt=false # { False, True } -# If nl_after_brace_open and nl_after_brace_open_cmt are true, a newline is -# placed between the open brace and a trailing single-line comment. -# -nl_after_vbrace_open=false # { False, True } -# Whether to put a newline after a virtual brace open with a non-empty body. -# These occur in un-braced if/while/do/for statement bodies. -# -nl_after_vbrace_open_empty=false # { False, True } -# Whether to put a newline after a virtual brace open with an empty body. -# These occur in un-braced if/while/do/for statement bodies. -# -nl_after_brace_close=false # { False, True } -# Whether to put a newline after a brace close. -# Does not apply if followed by a necessary ';'. -# -nl_after_vbrace_close=false # { False, True } -# Whether to put a newline after a virtual brace close. -# Would add a newline before return in: 'if (foo) a++; return;' -# -#nl_brace_struct_var { Ignore, Add, Remove, Force } -# Control the newline between the close brace and 'b' in: 'struct { int a; } b;' -# Affects enums, unions and structures. If set to ignore, uses nl_after_brace_close -# -#nl_define_macro { False, True } -# Whether to alter newlines in '#define' macros -# -nl_squeeze_ifdef=false # { False, True } -# Whether to remove blanks after '#ifxx' and '#elxx', or before '#elxx' and '#endif'. Does not affect top-level #ifdefs. -# -#nl_squeeze_ifdef_top_level { False, True } -# Makes the nl_squeeze_ifdef option affect the top-level #ifdefs as well. -# -#nl_before_if { Ignore, Add, Remove, Force } -# Add or remove blank line before 'if' -# -#nl_after_if { Ignore, Add, Remove, Force } -# Add or remove blank line after 'if' statement -# -#nl_before_for { Ignore, Add, Remove, Force } -# Add or remove blank line before 'for' -# -#nl_after_for { Ignore, Add, Remove, Force } -# Add or remove blank line after 'for' statement -# -#nl_before_while { Ignore, Add, Remove, Force } -# Add or remove blank line before 'while' -# -#nl_after_while { Ignore, Add, Remove, Force } -# Add or remove blank line after 'while' statement -# -#nl_before_switch { Ignore, Add, Remove, Force } -# Add or remove blank line before 'switch' -# -#nl_after_switch { Ignore, Add, Remove, Force } -# Add or remove blank line after 'switch' statement -# -#nl_before_synchronized { Ignore, Add, Remove, Force } -# Add or remove blank line before 'synchronized' -# -#nl_after_synchronized { Ignore, Add, Remove, Force } -# Add or remove blank line after 'synchronized' statement -# -#nl_before_do { Ignore, Add, Remove, Force } -# Add or remove blank line before 'do' -# -#nl_after_do { Ignore, Add, Remove, Force } -# Add or remove blank line after 'do/while' statement -# -nl_ds_struct_enum_cmt=false # { False, True } -# Whether to double-space commented-entries in struct/union/enum -# -nl_ds_struct_enum_close_brace=false # { False, True } -# force nl before } of a struct/union/enum -# (lower priority than 'eat_blanks_before_close_brace') -# -#nl_before_func_class_def Number -# Add or remove blank line before 'func_class_def' -# -#nl_before_func_class_proto Number -# Add or remove blank line before 'func_class_proto' -# -#nl_class_colon { Ignore, Add, Remove, Force } -# Add or remove a newline before/after a class colon, -# (tied to pos_class_colon). -# -#nl_constr_colon { Ignore, Add, Remove, Force } -# Add or remove a newline around a class constructor colon. -# Related to nl_constr_init_args, pos_constr_colon and pos_constr_comma. -# -nl_namespace_two_to_one_liner=false # { False, True } -#If true turns two liner namespace to one liner,else will make then four liners -# -nl_create_if_one_liner=false # { False, True } -# Change simple unbraced if statements into a one-liner -# 'if(b)\n i++;' => 'if(b) i++;' -# -nl_create_for_one_liner=false # { False, True } -# Change simple unbraced for statements into a one-liner -# 'for (i=0;i<5;i++)\n foo(i);' => 'for (i=0;i<5;i++) foo(i);' -# -nl_create_while_one_liner=false # { False, True } -# Change simple unbraced while statements into a one-liner -# 'while (i<5)\n foo(i++);' => 'while (i<5) foo(i++);' -nl_create_func_def_one_liner=false # { False, True } -# Change simple 4,3,2 liner function def statements into a one-liner -# -#nl_split_if_one_liner { False, True } -# Change a one-liner if statement into simple unbraced if -# 'if(b) i++;' => 'if(b) i++;' -# -#nl_split_for_one_liner { False, True } -# Change a one-liner for statement into simple unbraced for -# 'for (i=0;<5;i++) foo(i);' => 'for (i=0;<5;i++) foo(i);' -# -#nl_split_while_one_liner { False, True } -# Change simple unbraced while statements into a one-liner while -# 'while (i<5)\n foo(i++);' => 'while (i<5) foo(i++);' -# -## -## Positioning options -## -# -#pos_arith { Ignore, Lead, Trail } -# The position of arithmetic operators in wrapped expressions -# -#pos_assign { Ignore, Lead, Trail } -# The position of assignment in wrapped expressions. -# Do not affect '=' followed by '{' -# -#pos_bool { Ignore, Lead, Trail } -# The position of boolean operators in wrapped expressions -# -#pos_compare { Ignore, Lead, Trail } -# The position of comparison operators in wrapped expressions -# -#pos_conditional { Ignore, Lead, Trail } -# The position of conditional (b ? t : f) operators in wrapped expressions -# -#pos_comma { Ignore, Lead, Trail } -# The position of the comma in wrapped expressions -# -#pos_enum_comma { Ignore, Lead, Trail } -# The position of the comma in enum entries -# -#pos_class_comma { Ignore, Lead, Trail } -# The position of the comma in the base class list if there are more than one line, -# (tied to nl_class_init_args). -# -#pos_constr_comma { Ignore, Lead, Trail } -# The position of the comma in the constructor initialization list. -# Related to nl_constr_colon, nl_constr_init_args and pos_constr_colon. -# -#pos_class_colon { Ignore, Lead, Trail } -# The position of trailing/leading class colon, between class and base class list -# (tied to nl_class_colon). -# -#pos_constr_colon { Ignore, Lead, Trail } -# The position of colons between constructor and member initialization, -# (tied to UO_nl_constr_colon). -# Related to nl_constr_colon, nl_constr_init_args and pos_constr_comma. -# -## -## Line Splitting options -## -# -#code_width Number -# Try to limit code width to N number of columns -# -ls_for_split_full=false # { False, True } -# Whether to fully split long 'for' statements at semi-colons -# -ls_func_split_full=false # { False, True } -# Whether to fully split long function protos/calls at commas -# -#ls_code_width { False, True } -# Whether to split lines as close to code_width as possible and ignore some groupings -# -## -## Blank line options -## -# -nl_max=3 # Number -# The maximum consecutive newlines (3 = 2 blank lines) -# -#nl_after_func_proto Number -# The number of newlines after a function prototype, if followed by another function prototype -# -#nl_after_func_proto_group Number -# The number of newlines after a function prototype, if not followed by another function prototype -# -#nl_after_func_class_proto Number -# The number of newlines after a function class prototype, if followed by another function class prototype -# -#nl_after_func_class_proto_group Number -# The number of newlines after a function class prototype, if not followed by another function class prototype -# -#nl_before_func_body_def Number -# The number of newlines before a multi-line function def body -# -#nl_before_func_body_proto Number -# The number of newlines before a multi-line function prototype body -# -nl_after_func_body=2 # Number -# The number of newlines after '}' of a multi-line function body -# -#nl_after_func_body_class Number -# The number of newlines after '}' of a multi-line function body in a class declaration -# -#nl_after_func_body_one_liner Number -# The number of newlines after '}' of a single line function body -# -#nl_before_block_comment Number -# The minimum number of newlines before a multi-line comment. -# Doesn't apply if after a brace open or another multi-line comment. -# -#nl_before_c_comment Number -# The minimum number of newlines before a single-line C comment. -# Doesn't apply if after a brace open or other single-line C comments. -# -#nl_before_cpp_comment Number -# The minimum number of newlines before a CPP comment. -# Doesn't apply if after a brace open or other CPP comments. -# -nl_after_multiline_comment=false # { False, True } -# Whether to force a newline after a multi-line comment. -# -#nl_after_label_colon { False, True } -# Whether to force a newline after a label's colon. -# -#nl_after_struct Number -# The number of newlines after '}' or ';' of a struct/enum/union definition -# -#nl_after_class Number -# The number of newlines after '}' or ';' of a class definition -# -#nl_before_access_spec Number -# The number of newlines before a 'private:', 'public:', 'protected:', 'signals:', or 'slots:' label. -# Will not change the newline count if after a brace open. -# 0 = No change. -# -#nl_after_access_spec Number -# The number of newlines after a 'private:', 'public:', 'protected:', 'signals:' or 'slots:' label. -# 0 = No change. -# the option 'nl_after_access_spec' takes preference over 'nl_typedef_blk_start' and 'nl_var_def_blk_start' -# -#nl_comment_func_def Number -# The number of newlines between a function def and the function comment. -# 0 = No change. -# -#nl_after_try_catch_finally Number -# The number of newlines after a try-catch-finally block that isn't followed by a brace close. -# 0 = No change. -# -#nl_around_cs_property Number -# The number of newlines before and after a property, indexer or event decl. -# 0 = No change. -# -#nl_between_get_set Number -# The number of newlines between the get/set/add/remove handlers in C#. -# 0 = No change. -# -nl_property_brace=force # { Ignore, Add, Remove, Force } -# Add or remove newline between C# property and the '{' -# -eat_blanks_after_open_brace=true # { False, True } -# Whether to remove blank lines after '{' -# -eat_blanks_before_close_brace=true # { False, True } -# Whether to remove blank lines before '}' -# -#nl_remove_extra_newlines Number -# How aggressively to remove extra newlines not in preproc. -# 0: No change -# 1: Remove most newlines not handled by other config -# 2: Remove all newlines and reformat completely by config -# -#nl_before_return { False, True } -# Whether to put a blank line before 'return' statements, unless after an open brace. -# -nl_after_return=false # { False, True } -# Whether to put a blank line after 'return' statements, unless followed by a close brace. -# -#nl_after_annotation { Ignore, Add, Remove, Force } -# Whether to put a newline after a Java annotation statement. -# Only affects annotations that are after a newline. -# -#nl_between_annotation { Ignore, Add, Remove, Force } -# Controls the newline between two annotations. -# -## -## Code modifying options (non-whitespace) -## -# -#mod_full_brace_do { Ignore, Add, Remove, Force } -# Add or remove braces on single-line 'do' statement -# -#mod_full_brace_for { Ignore, Add, Remove, Force } -# Add or remove braces on single-line 'for' statement -# -#mod_full_brace_function { Ignore, Add, Remove, Force } -# Add or remove braces on single-line function definitions. (Pawn) -# -#mod_full_brace_if { Ignore, Add, Remove, Force } -# Add or remove braces on single-line 'if' statement. Will not remove the braces if they contain an 'else'. -# -mod_full_brace_if_chain=false # { False, True } -# Make all if/elseif/else statements in a chain be braced or not. Overrides mod_full_brace_if. -# If any must be braced, they are all braced. If all can be unbraced, then the braces are removed. -# -#mod_full_brace_if_chain_only { False, True } -# Make all if/elseif/else statements with at least one 'else' or 'else if' fully braced. -# If mod_full_brace_if_chain is used together with this option, all if-else chains will get braces, -# and simple 'if' statements will lose them (if possible). -# -# -#mod_full_brace_nl Number -# Don't remove braces around statements that span N newlines -# -#mod_full_brace_while { Ignore, Add, Remove, Force } -# Add or remove braces on single-line 'while' statement -# -#mod_full_brace_using { Ignore, Add, Remove, Force } -# Add or remove braces on single-line 'using ()' statement -# -mod_paren_on_return=ignore # { Ignore, Add, Remove, Force } -# Add or remove unnecessary paren on 'return' statement -# -mod_pawn_semicolon=false # { False, True } -# Whether to change optional semicolons to real semicolons -# -mod_full_paren_if_bool=false # { False, True } -# Add parens on 'while' and 'if' statement around bools -# -mod_remove_extra_semicolon=true # { False, True } -# Whether to remove superfluous semicolons -# -#mod_add_long_function_closebrace_comment Number -# If a function body exceeds the specified number of newlines and doesn't have a comment after -# the close brace, a comment will be added. -# -#mod_add_long_namespace_closebrace_comment # Number -# If a namespace body exceeds the specified number of newlines and doesn't have a comment after -# the close brace, a comment will be added. -# -#mod_add_long_switch_closebrace_comment Number -# If a switch body exceeds the specified number of newlines and doesn't have a comment after -# the close brace, a comment will be added. -# -#mod_add_long_ifdef_endif_comment Number -# If an #ifdef body exceeds the specified number of newlines and doesn't have a comment after -# the #endif, a comment will be added. -# -#mod_add_long_ifdef_else_comment Number -# If an #ifdef or #else body exceeds the specified number of newlines and doesn't have a comment after -# the #else, a comment will be added. -# -#mod_sort_import { False, True } -# If TRUE, will sort consecutive single-line 'import' statements [Java, D] -# -#mod_sort_using { False, True } -# If TRUE, will sort consecutive single-line 'using' statements [C#] -# -#mod_sort_include { False, True } -# If TRUE, will sort consecutive single-line '#include' statements [C/C++] and '#import' statements [Obj-C] -# This is generally a bad idea, as it may break your code. -# -mod_move_case_break=false # { False, True } -# If TRUE, it will move a 'break' that appears after a fully braced 'case' before the close brace. -# -#mod_case_brace { Ignore, Add, Remove, Force } -# Will add or remove the braces around a fully braced case statement. -# Will only remove the braces if there are no variable declarations in the block. -# -mod_remove_empty_return=true # { False, True } -# If TRUE, it will remove a void 'return;' that appears as the last statement in a function. -# -## -## Comment modifications -## -# -#cmt_width Number -# Try to wrap comments at cmt_width columns -# -#cmt_reflow_mode Number -# Set the comment reflow mode (default: 0) -# 0: no reflowing (apart from the line wrapping due to cmt_width) -# 1: no touching at all -# 2: full reflow -# -# -cmt_convert_tab_to_spaces=True # { False, True } -# Whether to convert all tabs to spaces in comments. Default is to leave tabs inside comments alone, unless used for indenting. -# -cmt_indent_multi=false # { False, True } -# If false, disable all multi-line comment changes, including cmt_width. keyword substitution and leading chars. -# Default=True. -# -cmt_c_group=false # { False, True } -# Whether to group c-comments that look like they are in a block -# -cmt_c_nl_start=false # { False, True } -# Whether to put an empty '/*' on the first line of the combined c-comment -# -cmt_c_nl_end=false # { False, True } -# Whether to put a newline before the closing '*/' of the combined c-comment -# -cmt_cpp_group=false # { False, True } -# Whether to group cpp-comments that look like they are in a block -# -cmt_cpp_nl_start=false # { False, True } -# Whether to put an empty '/*' on the first line of the combined cpp-comment -# -cmt_cpp_nl_end=false # { False, True } -# Whether to put a newline before the closing '*/' of the combined cpp-comment -# -cmt_cpp_to_c=false # { False, True } -# Whether to change cpp-comments into c-comments -# -cmt_star_cont=false # { False, True } -# Whether to put a star on subsequent comment lines -# -#cmt_sp_before_star_cont Number -# The number of spaces to insert at the start of subsequent comment lines -# -#cmt_sp_after_star_cont Number -# The number of spaces to insert after the star on subsequent comment lines -# -cmt_multi_check_last=false # { False, True } -# For multi-line comments with a '*' lead, remove leading spaces if the first and last lines of -# the comment are the same length. Default=True -# -#cmt_multi_first_len_minimum Number -# For multi-line comments with a '*' lead, remove leading spaces if the first and last lines of -# the comment are the same length AND if the length is bigger as the first_len minimum. Default=4 -# -#cmt_insert_file_header String -# The filename that contains text to insert at the head of a file if the file doesn't start with a C/C++ comment. -# Will substitute $(filename) with the current file's name. -# -#cmt_insert_file_footer String -# The filename that contains text to insert at the end of a file if the file doesn't end with a C/C++ comment. -# Will substitute $(filename) with the current file's name. -# -#cmt_insert_func_header String -# The filename that contains text to insert before a function implementation if the function isn't preceded with a C/C++ comment. -# Will substitute $(function) with the function name and $(javaparam) with the javadoc @param and @return stuff. -# Will also substitute $(fclass) with the class name: void CFoo::Bar() { ... } -# -#cmt_insert_class_header String -# The filename that contains text to insert before a class if the class isn't preceded with a C/C++ comment. -# Will substitute $(class) with the class name. -# -#cmt_insert_oc_msg_header String -# The filename that contains text to insert before a Obj-C message specification if the method isn't preceded with a C/C++ comment. -# Will substitute $(message) with the function name and $(javaparam) with the javadoc @param and @return stuff. -# -cmt_insert_before_preproc=false # { False, True } -# If a preprocessor is encountered when stepping backwards from a function name, then -# this option decides whether the comment should be inserted. -# Affects cmt_insert_oc_msg_header, cmt_insert_func_header and cmt_insert_class_header. -# -#cmt_insert_before_inlines { False, True } -# If a function is declared inline to a class definition, then -# this option decides whether the comment should be inserted. -# Affects cmt_insert_func_header. -# -#cmt_insert_before_ctor_dtor { False, True } -# If the function is a constructor/destructor, then -# this option decides whether the comment should be inserted. -# Affects cmt_insert_func_header. -# -## -## Preprocessor options -## -# -#pp_indent { Ignore, Add, Remove, Force } -# Control indent of preprocessors inside #if blocks at brace level 0 (file-level) -# -#pp_indent_at_level { False, True } -# Whether to indent #if/#else/#endif at the brace level (true) or from column 1 (false) -# -#pp_indent_count Number -# Specifies the number of columns to indent preprocessors per level at brace level 0 (file-level). -# If pp_indent_at_level=false, specifies the number of columns to indent preprocessors per level at brace level > 0 (function-level). -# Default=1. -# -pp_space=ignore # { Ignore, Add, Remove, Force } -# Add or remove space after # based on pp_level of #if blocks -# -#pp_space_count Number -# Sets the number of spaces added with pp_space -# -#pp_indent_region Number -# The indent for #region and #endregion in C# and '#pragma region' in C/C++ -# -#pp_region_indent_code { False, True } -# Whether to indent the code between #region and #endregion -# -#pp_indent_if Number -# If pp_indent_at_level=true, sets the indent for #if, #else and #endif when not at file-level. -# 0: indent preprocessors using output_tab_size. -# >0: column at which all preprocessors will be indented. -# -#pp_if_indent_code { False, True } -# Control whether to indent the code between #if, #else and #endif. -# -#pp_define_at_level { False, True } -# Whether to indent '#define' at the brace level (true) or from column 1 (false) -# -#pp_ignore_define_body { False, True } -# Whether to ignore the '#define' body while formatting. -# -## -## Use or Do not Use options -## -# -#use_indent_func_call_param { False, True } -# True: indent_func_call_param will be used (default) -# False: indent_func_call_param will NOT be used -# -#use_indent_continue_only_once { False, True } -# The value of the indentation for a continuation line is calculate differently if the line is: -# a declaration :your case with QString fileName ... -# an assigment :your case with pSettings = new QSettings( ... -# At the second case the option value might be used twice: -# at the assigment -# at the function call (if present) -# To prevent the double use of the option value, use this option with the value 'true'. -# True: indent_continue will be used only once -# False: indent_continue will be used every time (default) -# -use_options_overriding_for_qt_macros=false # { False, True } -# SIGNAL/SLOT Qt macros have special formatting options. See options_for_QT.cpp for details. -# Default=True. -# -## -## Warn levels - 1: error, 2: warning (default), 3: note -## -# -warn_level_tabs_found_in_verbatim_string_literals=1 # { 1, 2, 3 } -# Warning is given if doing tab-to-\t replacement and we have found one in a C# verbatim string literal. -# -### -### -=- Below here is unstable (work-in-progress) -=- -### - +input_tab_size=4 +string_replace_tab_chars=true +tok_split_gte=false +disable_processing_cmt=*begin-nonstandard-formatting* +enable_processing_cmt=*end-nonstandard-formatting* +utf8_bom=remove +utf8_byte=false +utf8_force=false +indent_columns=4 +indent_with_tabs=0 +indent_cmt_with_tabs=false +indent_align_string=false +indent_braces=false +indent_braces_no_func=false +indent_braces_no_class=false +indent_braces_no_struct=false +indent_brace_parent=false +indent_cs_delegate_brace=true +indent_namespace=true +indent_extern=false +indent_class=true +indent_class_colon=false +indent_else_if=false +indent_var_def_cont=false +indent_func_call_param=true +indent_func_def_param=true +indent_func_proto_param=true +indent_func_class_param=false +indent_func_ctor_var_param=false +indent_template_param=false +indent_func_param_double=false +indent_relative_single_line_comments=false +indent_switch_case=4 +indent_case_shift=0 +indent_case_brace=0 +indent_col1_comment=false +indent_label=-4 +indent_access_spec=-4 +indent_paren_nl=false +indent_comma_paren=false +indent_bool_paren=false +indent_first_bool_expr=false +indent_square_nl=false +indent_preserve_sql=false +indent_align_paren=false +indent_oc_block_msg_xcode_style=true +indent_off_after_return_new=true +indent_single_after_return=true +sp_arith=add +sp_assign=add +sp_assign_default=add +sp_enum_assign=add +sp_pp_concat=remove +sp_pp_stringify=remove +sp_bool=add +sp_compare=add +sp_inside_paren=remove +sp_paren_paren=remove +sp_balance_nested_parens=false +sp_paren_brace=force +sp_after_type=ignore +sp_template_angle=remove +sp_before_angle=remove +sp_inside_angle=remove +sp_angle_paren=remove +sp_angle_paren_empty=remove +sp_angle_word=add +sp_angle_shift=remove +sp_before_sparen=force +sp_inside_sparen=remove +sp_after_sparen=add +sp_sparen_brace=force +sp_special_semi=force +sp_before_semi=remove +sp_before_semi_for=remove +sp_before_semi_for_empty=remove +sp_after_semi=add +sp_after_semi_for=force +sp_after_semi_for_empty=remove +sp_before_square=remove +sp_before_squares=remove +sp_inside_square=remove +sp_after_comma=add +sp_before_comma=ignore +sp_after_mdatype_commas=remove +sp_before_mdatype_commas=remove +sp_between_mdatype_commas=remove +sp_paren_comma=remove +sp_after_class_colon=force +sp_before_class_colon=force +sp_before_case_colon=remove +sp_after_operator=remove +sp_after_operator_sym=remove +sp_after_operator_sym_empty=remove +sp_after_cast=remove +sp_inside_paren_cast=remove +sp_cpp_cast_paren=remove +sp_sizeof_paren=remove +sp_inside_braces_enum=add +sp_inside_braces_empty=remove +sp_type_func=ignore +sp_func_proto_paren=remove +sp_func_def_paren=remove +sp_inside_fparens=remove +sp_inside_fparen=remove +sp_fparen_brace=add +sp_func_call_paren=remove +sp_func_call_paren_empty=remove +sp_func_call_user_paren=remove +sp_func_class_paren=remove +sp_return_paren=add +sp_defined_paren=remove +sp_throw_paren=add +sp_catch_paren=add +sp_brace_typedef=add +sp_getset_brace=add +sp_after_dc=remove +sp_not=remove +sp_inv=remove +sp_addr=remove +sp_member=remove +sp_deref=remove +sp_sign=remove +sp_incdec=remove +sp_before_nl_cont=add +sp_after_oc_scope=force +sp_after_oc_colon=remove +sp_before_oc_colon=remove +sp_after_oc_dict_colon=force +sp_before_oc_dict_colon=remove +sp_after_send_oc_colon=force +sp_before_send_oc_colon=remove +sp_after_oc_type=remove +sp_after_oc_return_type=remove +sp_after_oc_at_sel=remove +sp_inside_oc_at_sel_parens=remove +sp_cond_colon=add +sp_cond_question=add +sp_case_label=ignore +sp_after_new=force +sp_between_new_paren=remove +sp_skip_vbrace_tokens=true +align_keep_tabs=false +align_with_tabs=false +align_on_tabstop=false +align_number_right=false +align_func_params=false +align_same_func_call_params=false +align_var_def_colon=false +align_var_def_attribute=false +align_var_def_inline=false +align_right_cmt_mix=false +align_on_operator=false +align_mix_var_proto=false +align_single_line_func=false +align_single_line_brace=false +align_nl_cont=false +align_left_shift=false +nl_collapse_empty_body=false +nl_assign_leave_one_liners=true +nl_class_leave_one_liners=true +nl_enum_leave_one_liners=true +nl_getset_leave_one_liners=true +nl_func_leave_one_liners=true +nl_cpp_lambda_leave_one_liners=true +nl_if_leave_one_liners=false +nl_oc_msg_leave_one_liner=true +nl_start_of_file=remove +nl_end_of_file=force +nl_end_of_file_min=1 +nl_assign_brace=force +nl_enum_brace=force +nl_struct_brace=force +nl_union_brace=force +nl_if_brace=force +nl_brace_else=force +nl_else_brace=force +nl_else_if=remove +nl_brace_finally=force +nl_finally_brace=force +nl_try_brace=force +nl_getset_brace=force +nl_for_brace=force +nl_catch_brace=force +nl_brace_catch=force +nl_while_brace=force +nl_using_brace=force +nl_brace_brace=ignore +nl_do_brace=force +nl_brace_while=force +nl_switch_brace=force +nl_multi_line_cond=false +nl_before_case=false +nl_after_case=false +nl_case_colon_brace=force +nl_namespace_brace=force +nl_template_class=ignore +nl_class_brace=force +nl_fdef_brace=force +nl_after_semicolon=false +nl_after_brace_open=false +nl_after_brace_open_cmt=false +nl_after_vbrace_open=false +nl_after_vbrace_open_empty=false +nl_after_brace_close=false +nl_after_vbrace_close=false +nl_squeeze_ifdef=false +nl_ds_struct_enum_cmt=false +nl_ds_struct_enum_close_brace=false +nl_namespace_two_to_one_liner=false +nl_create_if_one_liner=false +nl_create_for_one_liner=false +nl_create_while_one_liner=false +nl_create_func_def_one_liner=false +ls_for_split_full=false +ls_func_split_full=false +nl_max=3 +nl_after_func_body=2 +nl_after_multiline_comment=false +nl_property_brace=force +eat_blanks_after_open_brace=true +eat_blanks_before_close_brace=true +nl_after_return=false +mod_full_brace_if_chain=false +mod_paren_on_return=ignore +mod_pawn_semicolon=false +mod_full_paren_if_bool=false +mod_remove_extra_semicolon=true +mod_move_case_break=false +mod_remove_empty_return=true +cmt_convert_tab_to_spaces=True +cmt_indent_multi=false +cmt_c_group=false +cmt_c_nl_start=false +cmt_c_nl_end=false +cmt_cpp_group=false +cmt_cpp_nl_start=false +cmt_cpp_nl_end=false +cmt_cpp_to_c=false +cmt_star_cont=false +cmt_multi_check_last=false +cmt_insert_before_preproc=false +pp_space=ignore +use_options_overriding_for_qt_macros=false +warn_level_tabs_found_in_verbatim_string_literals=1 # blocked by https://sourceforge.net/p/uncrustify/bugs/619/ # can be turned back on at any time -#mod_add_long_ifdef_else_comment=8 -#mod_add_long_ifdef_endif_comment=8 mod_add_long_ifdef_else_comment=0 mod_add_long_ifdef_endif_comment=0 - # Setting this 'false' will cause an extra tab to be added to function call args from an assignment: # # x = o.Func2(a, b, @@ -1947,4 +283,4 @@ sp_endif_cmt=ignore # want to turn this on, but can't do it without also getting alignment right. try running it on this file as an example: # Tools\BugReporterV2\qt_face\lib\src\MainWindow.cpp #nl_cpp_ldef_brace=force -indent_member_single=true +indent_member_single=true