Dock does not update from version 0.9.0 to 0.9.2

[snapjack]

Is there an existing issue for this?

• I have searched the existing issues

Description

I use the remote two firmware version 1.4.5 configured in german. I was able to connect the dock. When I go to the dock under "Integrations & Docks" in the web interface, I can see the dock. It has firmware 0.9.0. I click the dock, it shows "New firmware available", I click "Update", a empty popup opens and I get the error:

Komponentenfehler: 5 Request failed with status code 503

In the log files I get errors like so:
2023-11-09 13:42:20.562084 +00:00 core NOTICE Added standby inhibitor: Dock firmware update: custom-eaf840
2023-11-09 13:42:16.584836 +00:00 core ERROR Error encountered while processing the incoming HTTP request: ServiceUnavailable("Unsupported dock")

How to Reproduce

1. Open Web Configurator
2. Go to "Integrations & Docks"
3. Open the Dock, it should have firmware 0.9.0
4. Firmware 0.9.2 is available
5. Press "Update"
6. You get the error message "Komponentenfehler: 5 Request failed with status code 503"

Expected behavior

No error and firmware updates ;-)

System version

remote 1.4.5, dock 0.9.0

What part of the system affected by the problem?

Overall system

Additional context

No response

[zehnm]

Thanks for providing the log entries!
The Unsupported dock message is a good hint. What do you see as Service name when you edit the dock in the web-configurator? Does it start with UC-Dock... as in the following image?

[snapjack]

Here is my view:

[snapjack]

I was not able to connect the dock via scan. I had to add it manually using the IP of the dock. It's connected via LAN cable. I use a FritzBox 7530 and a Fritz Repeater 3000 and a Fritz Repeater 6000. The remote is connected via WLAN to the repeater 6000.

[zehnm]

Found it: a wrong check slipped in from the Simulator!
All custom configured docks are flagged as simulated docks... 🙈
Which then prevents the firmware update being uploaded.

Will be fixed in the next update.

Manual update:

1. Download the firmware ZIP file below and unpack it
2. Determine the IP address of your dock
3. Use the following curl command to update your dock:

curl  -F "file=@UCD2-firmware_v0.9.2.bin.signed" http://${DOCK_IP}/update

UCD2-firmware_v0.9.2.bin.signed.zip

[snapjack]

Has worked:

Update: OK!

[zehnm]

The next release has improved error handling in the web-configurator for dock firmware updates.

[zehnm]

Closing: release 1.6.4 has improved error handling for dock updates