initial commit
Switch branches/tags
Nothing to show
Clone or download
Latest commit d78dbdd Nov 5, 2017

README.md

Feinstaub-Sensor connected with LoRaWan by RFM95

based on the ESP8266 version of the community Stuttgart (Open Data Stuttgart) http://codefor.de/stuttgart/ build: http://luftdaten.info/feinstaubsensor-bauen/

used hardware

power supply

  • powered via USB: 5V, Vin on board connected to SDS011

power measurement

running: 110 - 130mA waiting: 70mA (no sleep mode implemented)

authentication

  • both authentication methods are available (only for DOIT). you have to configure the device via the console in the desired method

Over-the-Air Activation (OTAA)

Activation by Personalization (ABP)

remarks

  • please read carefully the changes made in lmic/config.h

  • and the compiling selections made for the board

  • you need to install ESP32 in the Arduino IDE (link in code)

  • Keys for ABP were separeted, structure explained

  • the values from DHT22 will be overwritten if both sensors are selected (see remarks in the code)

  • verify the I2C address of the BME280 and edit it in Adafruit-BME280.h (0x77 -> 0x76)

  • look here for a great description how to configure the console, add application and devices

decoder in console

function Decoder(bytes, port) { var SDS_ID = (bytes[3] << 24) | (bytes[2] << 16) | (bytes[1] << 8) | bytes[0];

var SDS_PM10 = (bytes[4] << 8) | bytes[5];

var SDS_PM25 = (bytes[6] << 8) | bytes[7];

var temp_x = (bytes[8] <<8) | bytes[9];

var hum_x = (bytes[10] <<8) | bytes[11];

var press_bme = (bytes[12] <<8) | bytes[13];

// var batteryV = (bytes[x] <<8) | bytes[x];

return {

SDS_ID: SDS_ID,

PM10: SDS_PM10 / 10,

PM25: SDS_PM25 / 10,

Temperature: temp_x / 100,

Humidity: hum_x / 100,

Pressure: press_bme

// batteryV: batteryV / 1000 not i,plemented jet

}

}