pred_bat:
  module: predbat
  class: PredBat

  # Sets the prefix for all created entities in HA - only change if you want to run more than once instance
  prefix: predbat

  # XXX: This is a configuration template, delete this line once you edit your configuration
  #template: True

  # If you are using Predbat outside of HA then set the HA URL and Key (long lived access token here)
  #ha_url: 'http://homeassistant.local:8123'
  #ha_key: 'xxx'

  # Timezone to work in
  timezone: Europe/London

  #
  # Sensors, currently more than one can be specified and they will be summed up automatically
  # however if you have two inverters only set one of them as they will both read the same.
  #

  inverter_type: MINE
  inverter:
    name: "Solis Inverter"
    has_rest_api: False
    has_mqtt_api: False
    has_service_api: True
    output_charge_control: "current"
    current_dp: 0
    has_charge_enable_time: False
    has_discharge_enable_time: False
    has_target_soc: False
    has_reserve_soc: False
    charge_time_format: "HH:MM"
    charge_time_entity_is_option: False
    soc_units: "%"
    num_load_entities: 1
    has_ge_inverter_mode: False
    time_button_press: False
    clock_time_format: "%Y-%m-%d %H:%M:%S"
    write_and_poll_sleep: 2
    has_time_window: False
    support_charge_freeze: False
    support_discharge_freeze: False
    can_span_midnight: True
    charge_control_immediate: False
    charge_discharge_with_rate: False
    
  charge_start_service:
    - service: script.set_solis_inverter_config_predbat
  discharge_start_service:
    - service: script.set_solis_inverter_config_predbat
  charge_stop_service:
    - service: script.set_solis_inverter_config_predbat
  discharge_stop_service:
    - service: script.set_solis_inverter_config_predbat

  timed_charge_current:
    - input_number.solis_battery_charge_rate_predbat
  timed_discharge_current:
    - input_number.solis_battery_discharge_rate_predbat

  #solax_modbus_new: True   # Set to True if you have integration version 2024.03.2 or beyond

  num_inverters: 1
  #
  # Controls/status - must by 1 per inverter
  #

  # Max inverter power from battery
  battery_rate_max:
    - 3600
  # Battery capacity in kWh
  soc_max:
    - 9.6

  # Solis specific parameters (these are based on https://github.com/wills106/homeassistant-solax-modbus)

  load_today:
    - sensor.solis_daily_grid_energy_used
  import_today:
    - sensor.solis_daily_grid_energy_purchased
  export_today:
    - sensor.solis_daily_on_grid_energy
  pv_today:
    - sensor.solis_energy_today

  battery_voltage:
    - sensor.solis_battery_voltage

  # This is disabled by default in the Solax integration so it must be manually enabled.
  #inverter_time:
  #  - sensor.solis_rtc

  # This is disabled by default in the Solax integration so it must be manually enabled.
  battery_power:
    - sensor.solis_battery_power
  pv_power:
    - sensor.solis_ac_output_total_power

  # For Solis inverters we need to add the bypass (backup) load to the main house load. If not used the load_power_1 can be commented out
  load_power:
    - sensor.solis_plant_total_consumption_power
  #load_power_1:
  #  - sensor.solis_backup_load_power

  soc_percent:
    - sensor.solis_remaining_battery_capacity

  reserve:
    - sensor.solis_force_discharge_soc

  battery_min_soc:
    - sensor.solis_force_discharge_soc

  # With the Solax integration we need to press a button to send the time to
  #charge_discharge_update_button:
  #  - button.solis_update_charge_discharge_times

  #timed_charge_current:
  #  - number.solis_timed_charge_current
  #charge_start_hour:
  #  - number.solis_timed_charge_start_hours
  #charge_start_minute:
  #  - number.solis_timed_charge_start_minutes
  #charge_end_hour:
  #  - number.solis_timed_charge_end_hours
  #charge_end_minute:
  #  - number.solis_timed_charge_end_minutes


  #timed_discharge_current:
  #  - number.solis_timed_discharge_current

  #discharge_start_hour:
  #  - number.solis_timed_discharge_start_hours
  #discharge_start_minute:
  #  - number.solis_timed_discharge_start_minutes
  #discharge_end_hour:
  #  - number.solis_timed_discharge_end_hours
  #discharge_end_minute:
  #  - number.solis_timed_discharge_end_minutes


  #energy_control_switch:
  #  - select.solis_energy_storage_control_switch

  # Inverter max AC limit (one per inverter)
  # If you have a second inverter for PV only please add the two values together
  inverter_limit: 3600

  # Export limit is a software limit set on your inverter that prevents exporting above a given level
  # When enabled Predbat will model this limit
  #export_limit:
  #  - 3600
  #  - 3600
  #
  # The maximum rate the inverter can charge and discharge the battery can be overwritten, this will change
  # the register programming and thus cap the max rates. The default is to use the maximum supported rates (recommended)
  #
  inverter_limit_charge:
    - 3600
  inverter_limit_discharge:
    - 3600


  # Some inverters don't turn off when the rate is set to 0, still charge or discharge at around 200w
  # The value can be set here in watts to model this (doesn't change operation)
  #inverter_battery_rate_min:
  #  - 100

  # Some batteries tail off their charge rate at high soc%
  # enter the charging curve here as a % of the max charge rate for each soc percentage.
  # the default is 1.0 (full power)
  #battery_charge_power_curve:
  #  91 : 0.91
  #  92 : 0.81
  #  93 : 0.71
  #  94 : 0.62
  #  95 : 0.52
  #  96 : 0.43
  #  97 : 0.33
  #  98 : 0.24
  #  99 : 0.24
  #  100 : 0.24

  # Inverter clock skew in minutes, e.g. 1 means it's 1 minute fast and -1 is 1 minute slow
  # Separate start and end options are applied to the start and end time windows, mostly as you want to start late (not early) and finish early (not late)
  # Separate discharge skew for discharge windows only
  #inverter_clock_skew_start: 0
  #inverter_clock_skew_end: 0
  #inverter_clock_skew_discharge_start: 0
  #inverter_clock_skew_discharge_end: 0

  # Clock skew adjusts the Appdaemon time
  # This is the time that Predbat takes actions like starting discharge/charging
  # Only use this for workarounds if your inverter time is correct but Predbat is somehow wrong (AppDaemon issue)
  # 1 means add 1 minute to AppDaemon time, -1 takes it away
  #clock_skew: 0

  # Solcast cloud interface, set this or the local interface below
  #solcast_host: 'https://api.solcast.com.au/'
  #solcast_api_key: 'xxxx'
  #solcast_poll_hours: 8

  # Set these to match solcast sensor names if not using the cloud interface
  # The regular expression (re:) makes the solcast bit optional
  # If these don't match find your own names in Home Assistant
  pv_forecast_today: re:(sensor.(solcast_|)(pv_forecast_|)forecast_today)
  pv_forecast_tomorrow: re:(sensor.(solcast_|)(pv_forecast_|)forecast_tomorrow)
  pv_forecast_d3: re:(sensor.(solcast_|)(pv_forecast_|)forecast_(day_3|d3))
  pv_forecast_d4: re:(sensor.(solcast_|)(pv_forecast_|)forecast_(day_4|d4))

  # car_charging_energy defines an incrementing sensor which measures the charge added to your car
  # is used for car_charging_hold feature to filter out car charging from the previous load data
  # Automatically set to detect Wallbox and Zappi, if it doesn't match manually enter your sensor name
  # Also adjust car_charging_energy_scale if it's not in kwH to fix the units
  # car_charging_energy: 're:(sensor.myenergi_zappi_[0-9a-z]+_charge_added_session|sensor.wallbox_portal_added_energy)'

  # Car charging sensors set for Renault integration
  num_cars: 1
  car_charging_now: binary_sensor.xxxxxxx_charging

  # car_charging_planned is set to a sensor which when positive indicates the car will charged in the upcoming low rate slots
  # This should not be needed if you use Octopus Intelligent Slots which will take priority if enabled
  # The list of possible values is in car_charging_planned_response
  # Auto matches Zappi and Wallbox, or change it for your own
  car_charging_planned:
    - sensor.xxxxxxx_charge_state
  #   - 'connected'

  car_charging_planned_response:
    - 'waiting for planned charge'
    - 'waiting for current charge'
    - 'charging'
  #   - 'yes'
  #   - 'on'
  #   - 'true'
  #   - 'connected'
  #   - 'ev connected'
  #   - 'charging'
  #   - 'paused'
  #   - 'waiting for car demand'
  #   - 'waiting for ev'
  #   - 'scheduled'
  #   - 'enabled'
  #   - 'latched'
  #   - 'locked'
  #   - 'plugged in'

  # To make planned car charging more accurate, either using car_charging_planned or Octopus Intelligent
  # specify your battery size in kwh, charge limit % and current car battery soc % sensors/values
  # If you have intelligent the battery size and limit will be extracted from Intelligent directly
  # Set the car SOC% if you have it to give an accurate forecast of the cars battery levels
  # One entry per car if you have multiple cars
  car_charging_battery_size:
    - 52
  # car_charging_limit:
  #   - 're:number.tsunami_charge_limit'
  car_charging_soc:
    - sensor.xxxxxxx_battery

  # If you have Octopus intelligent, enable the intelligent slot information to add to pricing
  # Will automatically disable if not found, or comment out to disable fully
  # When enabled it overrides the 'car_charging_planned' feature and predict the car charging based on the intelligent plan (unless octopus intelligent charging is False)
  # This matches either the intelligent slot from the Octopus Plugin or from the Intelligent plugin
  #octopus_intelligent_slot: 're:(binary_sensor.octopus_intelligent_slot|re:binary_sensor.octopus_energy_intelligent_dispatching)'
  # octopus_intelligent_slot: 're:binary_sensor.octopus_energy_intelligent_dispatching'
  # octopus_ready_time: 're:time.octopus_energy_intelligent_ready_time'
  # octopus_charge_limit: 're:number.octopus_energy_intelligent_charge_limit'

  # Energy rates
  # Please set one of these three, if multiple are set then Octopus is used first, second rates_import/rates_export and latest basic metric

  # Set import and export entity to point to the Octopus Energy plugin
  # automatically matches your meter number assuming you have only one
  # Will be ignored if you don't have the sensor
  # Or manually set it to the correct sensor names e.g:
  # sensor.octopus_energy_electricity_xxxxxxxxxx_xxxxxxxxxxxxx_current_rate
  # sensor.octopus_energy_electricity_xxxxxxxxxx_xxxxxxxxxxxxx_export_current_rate
  metric_octopus_import: 're:(sensor.(octopus_energy_|)electricity_[0-9a-z]+_[0-9a-z]+_current_rate)'
  metric_octopus_export: 're:(sensor.(octopus_energy_|)electricity_[0-9a-z]+_[0-9a-z]+_export_current_rate)'

  # Standing charge can be set to a sensor (e.g. Octopus) or manually entered in pounds here (e.g. 0.50 is 50p)
  metric_standing_charge: 're:(sensor.(octopus_energy_|)electricity_[0-9a-z]+_[0-9a-z]+_current_standing_charge)'

  # Or set your actual rates across time for import and export
  # If start/end is missing it's assumed to be a fixed rate
  # Gaps are filled with 0
  # rates_import:
  #   - start: "23:30:00"
  #     end: "05:30:00"
  #     rate: 7.5
  #   - start: "05:30:00"
  #     end: "23:30:00"
  #     rate: 30.0

  # rates_export:
  #   - rate: 15.0

  # Can be used instead of the plugin to get import rates directly online
  # Overrides metric_octopus_import and rates_import
  # rates_import_octopus_url : "https://api.octopus.energy/v1/products/FLUX-IMPORT-23-02-14/electricity-tariffs/E-1R-FLUX-IMPORT-23-02-14-A/standard-unit-rates"
  # rates_import_octopus_url : "https://api.octopus.energy/v1/products/AGILE-FLEX-BB-23-02-08/electricity-tariffs/E-1R-AGILE-FLEX-BB-23-02-08-A/standard-unit-rates"

  # Overrides metric_octopus_export and rates_export
  # rates_export_octopus_url: "https://api.octopus.energy/v1/products/FLUX-EXPORT-BB-23-02-14/electricity-tariffs/E-1R-FLUX-EXPORT-BB-23-02-14-A/standard-unit-rates"
  # rates_export_octopus_url: "https://api.octopus.energy/v1/products/AGILE-OUTGOING-BB-23-02-28/electricity-tariffs/E-1R-AGILE-OUTGOING-BB-23-02-28-A/standard-unit-rates/"
  # rates_export_octopus_url: "https://api.octopus.energy/v1/products/OUTGOING-FIX-12M-BB-23-02-09/electricity-tariffs/E-1R-OUTGOING-FIX-12M-BB-23-02-09-A/standard-unit-rates/"

  # Import rates can be overridden with rate_import_override
  # Export rates can be overridden with rate_export_override
  # Use the same format as above, but a date can be included if it just applies for a set day (e.g. Octopus power ups)
  # This will override even the Octopus plugin rates if enabled
  #
  #rates_import_override:
  #  - date: '2024-08-21'
  #    start: '13:00:00'
  #    end: '15:30:00'
  #    rate: 0

  # Carbon Intensity data from National grid
  carbon_intensity: 're:(sensor.carbon_intensity_uk)'

  # Octopus saving session points to the saving session Sensor in the Octopus plugin, when enabled saving sessions will be at the assumed
  # Rate is read automatically from the add-in and converted to pence using the conversion rate below (default is 8)
  octopus_saving_session: 're:(binary_sensor.octopus_energy([0-9a-z_]+|)_saving_session(s|))'
  octopus_saving_session_octopoints_per_penny: 8

  # Watch list, a list of sensors to watch for changes and then update the plan if they change
  # This is useful for things like the Octopus Intelligent Slot sensor so that the plan update as soon as you plugin in
  # Only uncomment the items you actually have set up above in apps.yaml, of course you can add your own as well
  # Note those using +[] are lists that are appended to this list, whereas {} items are single items only
  watch_list:
  #  - '{octopus_intelligent_slot}'
  #  - '{octopus_ready_time}'
  #  - '{octopus_charge_limit}'
    - '{octopus_saving_session}'
    - '+[car_charging_planned]'
  #  - '+[car_charging_soc]'
    - '{car_charging_now}'



  # For pv estimate, leave blank for central estimate, or add 10 for 10% curve (worst case) or 90 or 90% curve (best case)
  # If you use 10 then disable pv_metric10_weight below
  # pv_estimate: 10

  # Days previous is the number of days back to find historical load data
  # Recommended is 7 to capture day of the week but 1 can also be used
  # if you have more history you could use 7 and 14 (in a list) but the standard data in HA only lasts 10 days
  days_previous:
    - 7


  # Days previous weight can be used to control the weighting of the previous load points, the values are multiplied by their
  # weights and then divided through by the total weight. E.g. if you used 1 and 0.5 then the first value would have 2/3rd of the weight and the second 1/3rd
  days_previous_weight:
    - 1

  # Number of hours forward to forecast, best left as-is unless you have specific reason
  forecast_hours: 48

  # The number of hours ahead to count in charge planning (for cost estimates)
  # It's best to set this on your charge window repeat cycle (24) but you may want to set it higher for more variable
  # tariffs like Agile
  forecast_plan_hours: 24

  # Specify the devices that notifies are sent to, the default is 'notify' which goes to all
  #notify_devices:
  #  - mobile_app_treforsiphone12_2

  # Set the frequency in minutes that this plugin is run
  # recommend something that divides by 60 (5, 10 or 15) or you won't trigger at the start of energy price slots
  run_every: 5

  # Battery scaling makes the battery smaller (e.g. 0.9) or bigger than its reported
  # If you have an 80% DoD battery that falsely reports it's kwh then set it to 0.8 to report the real figures
  battery_scaling: 1.0

  # Can be used to scale import and export data, used for workarounds
  import_export_scaling: 1.0

  # Export triggers:
  # For each trigger give a name, the minutes of export needed and the energy required in that time
  # Multiple triggers can be set at once so in total you could use too much energy if all run
  # Creates an entity called 'binary_sensor.predbat_export_trigger_<name>' which will be turned On when the condition is valid
  # connect this to your automation to start whatever you want to trigger
  export_triggers:
    - name: 'large'
      minutes: 60
      energy: 1.0
    - name: 'small'
      minutes: 15
      energy: 0.25

  # If you have a sensor that gives the energy consumed by your solar diverter then add it here
  # this will make the predictions more accurate. It should be an incrementing sensor, it can reset at midnight or not
  # It's assumed to be in Kwh but scaling can be applied if need be
  #iboost_energy_today: 'sensor.xxxxx'
  #iboost_energy_scaling: 1.0