Skip to content

MQTT Configuration

Vladimir Savchenko edited this page Aug 18, 2016 · 2 revisions

The Firmware can act as an MQTT Client by connecting to an MQTT Broker. Note: SSL is not supported, and MQTT 3.1 as protocol is supported(older versions are not)

In the messages section each line represents a separate message to be sent. The format is:

<topic_a>:<message_1>
<topic_a>:<message_2>
<topic_b>:<message_3>

e.g.:
data/temp:%TEMP%
domoticz/in:{key:"%TEMP%", key2: "%HUM%"}

Replacements are performed according to Placeholders

Clone this wiki locally
You can’t perform that action at this time.