From 14a48884de3595581e948de488ee5f58ba4951b9 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=C4=90o=C3=A0n=20Tr=E1=BA=A7n=20C=C3=B4ng=20Danh?= Date: Fri, 6 Oct 2023 20:31:13 +0700 Subject: [PATCH] fah: remove a backdoor package I see no reason for this to be included. Anyone want this backdoor installed, they can use their docker images. --- srcpkgs/fah/files/FAHClient/run | 6 - srcpkgs/fah/files/config.example | 413 ------------------------------- srcpkgs/fah/template | 33 --- 3 files changed, 452 deletions(-) delete mode 100755 srcpkgs/fah/files/FAHClient/run delete mode 100644 srcpkgs/fah/files/config.example delete mode 100644 srcpkgs/fah/template diff --git a/srcpkgs/fah/files/FAHClient/run b/srcpkgs/fah/files/FAHClient/run deleted file mode 100755 index 98fc57d26a9817..00000000000000 --- a/srcpkgs/fah/files/FAHClient/run +++ /dev/null @@ -1,6 +0,0 @@ -#!/bin/sh -exec 2>&1 -OPTS=--run-as=_fah -set -e -[ -r config ] && . config -cd /usr/libexec/_fah && exec /usr/bin/FAHClient $OPTS 2>&1 diff --git a/srcpkgs/fah/files/config.example b/srcpkgs/fah/files/config.example deleted file mode 100644 index e963ea31e4c9c9..00000000000000 --- a/srcpkgs/fah/files/config.example +++ /dev/null @@ -1,413 +0,0 @@ -# This is an example of configuration options for FAHClient. -# If you want to configure the services, put this file -# or a list of OTPS+=" ..." in a file /etc/sv/FAHClient/config - -# The number of client processing threads. -#OPTS+=" --client-threads=6" - -# The maximum cycle frequency in Hz of client threads. -#OPTS+=" --cycle-rate=4" - -# Run at most this many cycles. A value less than zero means run indefinitely. -#OPTS+=" --cycles=1" - -# The directory, relative to the current directory, where WU data and cores -# are stored. -#OPTS+=" --data-directory=." - -# Attempt to keep the system from sleeping when folding, unless on battery. -#OPTS+=" --disable-sleep-when-active" - -# The directory, relative to the current executable, where executables and -# dynamic libraries are located. -#OPTS+=" --exec-directory=/usr/bin" - -# Exit when all slots are paused. -#OPTS+=" --exit-when-done" - -# Start folding even if not configured. -#OPTS+=" --fold-anon" - -# Number of seconds of system idle time before enabling idle folding. Set to -# zero to ignore system idle time. -#OPTS+=" --idle-seconds=300" - -# Make an operating system specific call to open the Web Control in a browser -# once client is fully loaded -#OPTS+=" --open-web-control=fals" - -# Rotate the configuration file to a backup when saving would overwrite the -# previous configuration. -#OPTS+=" --config-rotate=false" - -# Put rotated configs in this directory. -#OPTS+=" --config-rotate-dir=configs" - -# The maximum number of rotated configuration files to keep. A value of zero -# will keep all configuration file backups. -#OPTS+=" --config-rotate-max=16" - -# The maximum number of errors before a slot is paused. -#OPTS+=" --max-slot-errors=10" - -# The maximum number of errors before a work unit is dumped. -#OPTS+=" --max-unit-errors=5" - -# Tell cores to checkpoint at least every # minutes. -#OPTS+=" --checkpoint=15" - -# The directory to store core files in. -#OPTS+=" --core-dir=cores" - -# Run this command on cores after they are downloaded. This option is useful -# for running Linux cores on BSD machines. -#OPTS+=" --core-prep=coreprep" - -# Set the core priority. Valid values are: idle or low -#OPTS+=" --core-priority=idle" - -# If true, try to lock core processes to a fixed CPU -#OPTS+=" --cpu-affinity=false" - -# The maximum percentage of the CPU a core should use. Not implemented by all -# cores. -#OPTS+=" --cpu-usage=100" - -# GPU usage as a percent from 10-100 -#OPTS+=" --gpu-usage=100" - -# Tell cores to disable optimized assembly code. -#OPTS+=" --no-assembly=false" - -# The cause you prefer to support. -#OPTS+=" --cause=ANY" - -# The client subtype -#OPTS+=" --client-subtype=LINUX" - -# The client type. Can be 'normal', 'advanced' or 'beta'. -#OPTS+=" --client-type=normal" - -# CPU species. -#OPTS+=" --cpu-species=X86_AMD" - -# CPU type. -#OPTS+=" --cpu-type=AMD64" - -# How many CPUs a slot should use. <= 0 will use all the CPUs detected in the -# system. -#OPTS+=" --cpus=-1" - -# The CUDA device index of the GPU, counting starts from 0. -#OPTS+=" --cuda-index=0" - -# Disable reading visualization data. -#OPTS+=" --disable-viz" - -# Pass extra arguments to the core. -#OPTS+=" --extra-core-args=" - -# Enable or disable auto-confiugration of GPU slots, requires appropriate -# hardware. -#OPTS+=" --gpu=true" - -# The index of the GPU as detected by the client. This index corresponds -# directly to the GPUs listed in the client's '--info' output. -#OPTS+=" --gpu-index=0" - -# Max size in bytes of a work unit packet. Can be small=5MiB, normal=25MiB, -# big=500MiB or a number. -#OPTS+=" --max-packet-size=normal" - -# Override memory, in bytes, reported to Folding@home. -#OPTS+=" --memory=2147483648" - -# The OpenCL device index of the GPU, counting starts from 0. -#OPTS+=" --opencl-index=0" - -# Operating system species. -#OPTS+=" --os-species=UNKNOWN" - -# Operating system type. -#OPTS+=" --os-type=LINUX" - -# Key for access to restricted testing projects. -#OPTS+=" --project-key=0" - -# Enable or disable auto-configuration of SMP slots, requires appropriate -# hardware. -#OPTS+=" --smp=true" - -# Set to false to disable the GUI. A GUI is not currently supported on all -# operating systems. -#OPTS+=" --gui-enabled=true" - -# Client addresses which are allowed to connect to this server. This option -# overrides IPs which are denied in the deny option. The pattern 0/0 matches -# all addresses. -#OPTS+=" --allow=127.0.0.1" - -# The maximum amount of time, in seconds, a connection can be idle before -# being dropped. -#OPTS+=" --connection-timeout=60" - -# Client address which are not allowed to connect to this server. -#OPTS+=" --deny=0/0" - -# A space separated list of server address and port pairs to listen on in the -# form [:] -#OPTS+=" --http-addresses=0:7396" - -# A space separated list of secure server address and port pairs to listen on -# in the form [:] -#OPTS+=" --https-addresses=localhost:4443" - -# The maximum amount of time, in seconds, a client can be connected to the -# server. -#OPTS+=" --max-connect-time=900" - -# Sets the maximum number of simultaneous connections. -#OPTS+=" --max-connections=800" - -# Sets the maximum length of a client request packet. -#OPTS+=" --max-request-length=52428800" - -# The minimum amount of time, in seconds, a client must be connected to the -# server before it can be dropped in favor or a new connection. -#OPTS+=" --min-connect-time=300" - -# The servers certificate file in PEM format. -#OPTS+=" --certificate-file=fah-cert.pem" - -# Supply a Certificate Revocation List. Overrides any internal CRL -#OPTS+=" --certificate-file=fah-cert.crl" - -# The servers private key file in PEM format. -#OPTS+=" --private-key-file=fah-private.pem" - -# Set log file. -#OPTS+=" --log=log.txt" - -# Print log messages with ANSI color coding. -#OPTS+=" --log-color=false" - -# Print carriage return and line feed at end of log lines. -#OPTS+=" --log-crlf=false" - -# Print date information with log entries. -#OPTS+=" --log-date=false" - -# Print date to log before new log entries if so many seconds have passed -# since the last date was printed. -#OPTS+=" --log-date-periodically=21600" - -# Print domain information with log entries. -#OPTS+=" --log-domain=false" - -# Set log levels by domain. Format is: -# [:i|d|t]: ... -# Entries are separated by white-space and or commas. -# i - info -# For example: server:i:3 module:6 -# Set 'server' domain info messages to level 3 and 'module' info messages to -# level 6. All other domains will follow the system wide log verbosity level. -# If is negative it is relative to the system wide verbosity. -#OPTS+=" --log-domain-levels=server:i:3 module:6" - -# Enable log message headers. -#OPTS+=" --log-header=false" - -# Print level information with log entries. -#OPTS+=" --log-level=false" - -# Don't print 'INFO(#):' in header. -#OPTS+=" --log-no-info-header=false" - -# Redirect all output to log file. Implies !log-to-screen. -#OPTS+=" --log-redirect=false" - -# Rotate log files on each run. -#OPTS+=" --log-rotate=false" - -# Put rotated logs in this directory. -#OPTS+=" --log-rotate-dir=logs" - -# Maximum number of rotated logs to keep. -#OPTS+=" --log-rotate-max=16" - -# Print shortened level information with log entries. -#OPTS+=" --log-short-level=false" - -# Remove any leading directories and trailing file extensions from domains so -# that source code file names can be easily used as log domains. -#OPTS+=" --log-simple-domains=false" - -# Print id with log entries. -#OPTS+=" --log-thread-id=false" - -# Print thread prefixes, if set, with log entries. -#OPTS+=" --log-thread-prefix=false" - -# Print time information with log entries. -#OPTS+=" --log-time=false" - -# Log to screen. -#OPTS+=" --log-to-screen=false" - -# Truncate log file. -#OPTS+=" --log-truncate=false" - -# Set logging level for INFO messages. -#OPTS+=" --verbosity=3" - -# Set proxy for outgoing HTTP connections -#OPTS+=" --proxy=127.0.0.1:3128" - -# Enable proxy configuration -#OPTS+=" --proxy-enable=false" - -# Set password for proxy connections -#OPTS+=" --proxy-pass=proxypass" - -# Set user name for proxy connections -#OPTS+=" --proxy-user=proxyuser" - -# Disable 'daemon', 'fork', 'pid' and 'respawn' options. Also defaults -# 'log-to-screen' to false. Used internally. -#OPTS+=" --child=false" - -# Short for --pid --service --respawn --log='' --fork -#OPTS+=" --daemon=false" - -# Run in background. -#OPTS+=" --fork=false" - -# Create PID file. -#OPTS+=" --pid=true" - -# Name of PID file. -#OPTS+=" --pid-file='Folding@home Client.pid'" - -# Set the process priority. Valid values are: idle, low, normal, high or -# realtime. -#OPTS+=" --priority=normal" - -# Run the application as a child process and respawn if it is killed or exits. -#OPTS+=" --respawn=false" - -# Run as specified user -#OPTS+=" --run-as=_fah" - -# Ignore user logout or hangup and interrupt signals -#OPTS+=" --service=false" - -# The address to which the command server should be bound. -#OPTS+=" --command-address=0.0.0.0" - -# IP address ranges that are allowed access to the command server with out a -# password if the 'password' option is set. These addresses will also have to -# be allowed IP based access. -#OPTS+=" --command-allow-no-pass=127.0.0.1" - -# IP address ranges that are not allowed access to the command server with out -# a password if the 'password' option is set. Overridden by -# command-allow-no-pass -#OPTS+=" --command-deny-no-pass=0/0" - -# Set to false to disable the command server. -#OPTS+=" --command-enable" - -# The port to which the command server should be bound. -#OPTS+=" --command-port=36330" - -# Evaluate the argument as a script. -#OPTS+=" --eval=false" - -# Set a command server password. Warning, setting a password disables the -# default IP address blocking. -#OPTS+=" --password=fahPassWord" - -# Run commands from a script file. -#OPTS+=" --script=script.cmd" - -# Only run slot when idle. -#OPTS+=" --idle=false" - -# The maximum amount of time to wait in seconds for a unit to exit on -# shutdown. -#OPTS+=" --max-shutdown-wait=60" - -# Pause the client or slot when the OS indicates the machine is running on -# battery power. -#OPTS+=" --pause-on-battery=true" - -# If true the slot will be started in a paused state. -#OPTS+=" --pause-on-start" - -# True if slot is paused. -#OPTS+=" --paused=false" - -# Set the client's power level. Valid values are 'light', 'medium' or 'full'. -# This setting affects the defaults of several other options such as 'cpus', -# 'pause-on-battery', etc. -#OPTS+=" --power=medium" - -# The machine ID. -#OPTS+=" --machine-id=0" - -# Your passkey. -#OPTS+=" --passkey=yourpass.key" - -# Your team number. -#OPTS+=" --team=0" - -# Your user name. -#OPTS+=" --user=Anonymous" - -# Client addresses which are allowed to connect to this Web server. This -# option overrides IPs which are denied in the web-deny option. This option -# differs from the 'allow'/'deny' options in that clients that are not allowed -# are served an access denied page rather than simply dropping the connection. -# The value '0/0' matches all IPs. -#OPTS+=" --web-allow=127.0.0.1" - -# Client address which are not allowed to connect to this Web server. -#OPTS+=" --web-deny=0/0" - -# Set to false to disable the web server. -#OPTS+=" --web-enable" - -# The name of the session cookie. -#OPTS+=" --session-cookie=fah_sid" - -# The maximum session lifetime in seconds. Zero for unlimited session -# lifetime. -#OPTS+=" --session-lifetime=86400" - -# The max maximum amount of time in seconds since the last time a session was -# used before it timesout. Zero for no session timeout. -#OPTS+=" --session-timeout=3600" - -# Dump units if their deadline has passed. -#OPTS+=" --dump-after-deadline=false" - -# Maximum units per slot in the work queue. -#OPTS+=" --max-queue=16" - -# Process at most this number of units, then pause. -#OPTS+=" --max-units=0" - -# Pre-download the next work unit when the current one is this far along. -# Values less than 90 are not allowed. -#OPTS+=" --next-unit-percentage=99" - -# Attempt to detect stalled work units and restart them. -#OPTS+=" --stall-detection-enabled=false" - -# Minimum estimated percent work unit completion since last frame before a WU -# can be considered stalled, if zero the percentage is ignored. -#OPTS+=" --stall-percent=5" - -# Minimum time, in seconds, since last frame before a WU can be considered -# stalled. -#OPTS+=" --stall-timeout=1800" diff --git a/srcpkgs/fah/template b/srcpkgs/fah/template deleted file mode 100644 index d25877761daf52..00000000000000 --- a/srcpkgs/fah/template +++ /dev/null @@ -1,33 +0,0 @@ -# Template file for 'fah' -pkgname=fah -version=7.6.13 -revision=1 -archs="x86_64" -hostmakedepends="python" -depends="python desktop-file-utils hicolor-icon-theme" -short_desc="Folding@home distributed computation power for research" -maintainer="Orphaned " -license="custom:Proprietary, GPL-2.0-only" -homepage="https://foldingathome.org" -distfiles="https://download.foldingathome.org/releases/public/release/fahclient/debian-stable-64bit/v${version%.*}/fahclient_${version}_amd64.deb - https://download.foldingathome.org/releases/public/release/fahcontrol/debian-stable-64bit/v${version%.*}/fahcontrol_${version}-1_all.deb - https://download.foldingathome.org/releases/public/release/fahviewer/debian-stable-64bit/v${version%.*}/fahviewer_${version}_amd64.deb" -checksum="113cf292f7cc3a49ed718f0c44849e30018e799fa9f1eacd75716badbcb64cc8 - cfbef479267600ad4d48a868c7d893848526f22318ce251c9ff8b1241887db61 - d37326469b23a18ca418f6d8e61e3007b135f444c7bc1e20ea3c0669c2dcce27" -nostrip=yes -repository="nonfree" -restricted=yes -system_accounts="_fah" -_fah_homedir="/usr/libexec/_fah" -_fah_descr="Folding@Home user" - -do_install() { - vcopy usr / - vsv FAHClient - mv -v ${DESTDIR}/usr/lib/python2.7/{dist,site}-packages - vlicense ${DESTDIR}/usr/share/doc/fahclient/copyright LICENSE.FAHClient - vlicense ${DESTDIR}/usr/share/doc/fahviewer/LICENSE LICENSE.FAHViewer - # Example file to modify or cut+paste from for /etc/sv/FAHClient/config - vsconf ${FILESDIR}/config.example -}