Skip to content
OctoPrint Plugin for an Open Source Filament Storage system.
Python JavaScript HTML CSS
Branch: master
Clone or download
Latest commit 4e4a62a Oct 25, 2019
Permalink
Type Name Latest commit message Commit time
Failed to load latest commit information.
extras Initial Commit. Oct 24, 2019
octoprint_filamentstorage Initial Commit. Oct 24, 2019
.editorconfig Initial Commit. Oct 24, 2019
.gitignore Initial Commit. Oct 24, 2019
MANIFEST.in Initial Commit. Oct 24, 2019
README.md Update README.md Oct 24, 2019
babel.cfg Initial Commit. Oct 24, 2019
requirements.txt Initial Commit. Oct 24, 2019
setup.py Initial Commit. Oct 24, 2019

README.md

OctoPrint-Filamentstorage

Connects to any Filament Storage Box supporting the below serial communications:

  1. sends periodic updates in the following format: H:xx.xx% T:xx.xxC S1:x.xxkg S2:x.xxkg S3:x.xxkg S4:x.xxkg P:[ON|OFF]
  2. accepts the following commands:
    1. SET H=xx (sets maxHumidity to xx)
    2. SET T=xx (sets maxTemperature to xx)
    3. TARE y (Tares scale y, 0<y<5)

Setup

Install via the bundled Plugin Manager or manually using this URL:

https://github.com/waltmoorhouse/OctoPrint-Filamentstorage/archive/master.zip

Configuration

Default Max Temp: Max Temp will be set to this value on startup. Default Max Humidity: Max Temp will be set to this value on startup.

Max Temp: If the temp goes above this, the dehydrator will be turned off. Max Humidity: If the humidity goes above this, the dehydrator will be turned on, unless currentTemp > maxTemp.

Device Compatibility

Any USB device that operates similarly to this Open Source project: https://github.com/waltmoorhouse/FilamentBox

You can’t perform that action at this time.