Permalink
Switch branches/tags
Nothing to show
Find file
Fetching contributors…
Cannot retrieve contributors at this time
850 lines (779 sloc) 25.1 KB
# Makefile.in generated by automake 1.11.1 from Makefile.am.
# tests/Makefile. Generated from Makefile.in by configure.
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
pkgdatadir = $(datadir)/lighttpd
pkgincludedir = $(includedir)/lighttpd
pkglibdir = $(libdir)/lighttpd
pkglibexecdir = $(libexecdir)/lighttpd
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = x86_64-unknown-linux-gnu
host_triplet = x86_64-unknown-linux-gnu
target_triplet = x86_64-unknown-linux-gnu
#check_PROGRAMS = fcgi-auth$(EXEEXT) \
# fcgi-responder$(EXEEXT)
subdir = tests
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
am__fcgi_auth_SOURCES_DIST = fcgi-auth.c
#am_fcgi_auth_OBJECTS = fcgi-auth.$(OBJEXT)
fcgi_auth_OBJECTS = $(am_fcgi_auth_OBJECTS)
fcgi_auth_DEPENDENCIES =
AM_V_lt = $(am__v_lt_$(V))
am__v_lt_ = $(am__v_lt_$(AM_DEFAULT_VERBOSITY))
am__v_lt_0 = --silent
am__fcgi_responder_SOURCES_DIST = fcgi-responder.c
#am_fcgi_responder_OBJECTS = \
# fcgi-responder.$(OBJEXT)
fcgi_responder_OBJECTS = $(am_fcgi_responder_OBJECTS)
fcgi_responder_DEPENDENCIES =
DEFAULT_INCLUDES = -I. -I$(top_builddir)
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__depfiles_maybe = depfiles
am__mv = mv -f
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
$(AM_CFLAGS) $(CFLAGS)
AM_V_CC = $(am__v_CC_$(V))
am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY))
am__v_CC_0 = @echo " CC " $@;
AM_V_at = $(am__v_at_$(V))
am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
am__v_at_0 = @
CCLD = $(CC)
LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
$(AM_LDFLAGS) $(LDFLAGS) -o $@
AM_V_CCLD = $(am__v_CCLD_$(V))
am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY))
am__v_CCLD_0 = @echo " CCLD " $@;
AM_V_GEN = $(am__v_GEN_$(V))
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
am__v_GEN_0 = @echo " GEN " $@;
SOURCES = $(fcgi_auth_SOURCES) $(fcgi_responder_SOURCES)
DIST_SOURCES = $(am__fcgi_auth_SOURCES_DIST) \
$(am__fcgi_responder_SOURCES_DIST)
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
html-recursive info-recursive install-data-recursive \
install-dvi-recursive install-exec-recursive \
install-html-recursive install-info-recursive \
install-pdf-recursive install-ps-recursive install-recursive \
installcheck-recursive installdirs-recursive pdf-recursive \
ps-recursive uninstall-recursive
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
distdir
ETAGS = etags
CTAGS = ctags
am__tty_colors = \
red=; grn=; lgn=; blu=; std=
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
am__relativize = \
dir0=`pwd`; \
sed_first='s,^\([^/]*\)/.*$$,\1,'; \
sed_rest='s,^[^/]*/*,,'; \
sed_last='s,^.*/\([^/]*\)$$,\1,'; \
sed_butlast='s,/*[^/]*$$,,'; \
while test -n "$$dir1"; do \
first=`echo "$$dir1" | sed -e "$$sed_first"`; \
if test "$$first" != "."; then \
if test "$$first" = ".."; then \
dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
else \
first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
if test "$$first2" = "$$first"; then \
dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
else \
dir2="../$$dir2"; \
fi; \
dir0="$$dir0"/"$$first"; \
fi; \
fi; \
dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
done; \
reldir="$$dir2"
ACLOCAL = ${SHELL} /home/saint/mycode/Lighttpd-FastDFS/missing --run aclocal-1.11
AMTAR = ${SHELL} /home/saint/mycode/Lighttpd-FastDFS/missing --run tar
AM_DEFAULT_VERBOSITY = 1
AR = ar
ATTR_LIB =
AUTOCONF = ${SHELL} /home/saint/mycode/Lighttpd-FastDFS/missing --run autoconf
AUTOHEADER = ${SHELL} /home/saint/mycode/Lighttpd-FastDFS/missing --run autoheader
AUTOMAKE = ${SHELL} /home/saint/mycode/Lighttpd-FastDFS/missing --run automake-1.11
AWK = gawk
BZ_LIB = -lbz2
CC = gcc
CCDEPMODE = depmode=gcc3
CFLAGS = -g -O2 -Wall -W -Wshadow -pedantic -std=gnu99
CPP = gcc -E
CPPFLAGS = -D_REENTRANT -D__EXTENSIONS__ -fopenmp -I/usr/include/ImageMagick -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGE_FILES
CRYPT_LIB = -lcrypt
CYGPATH_W = echo
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DL_LIB = -ldl
DSYMUTIL =
DUMPBIN =
ECHO_C =
ECHO_N = -n
ECHO_T =
EGREP = /bin/grep -E
EXEEXT =
FAM_CFLAGS =
FAM_LIBS =
FGREP = /bin/grep -F
GDBM_LIB =
GREP = /bin/grep
IMAGEMAGICKCONFIG = /usr/bin/MagickCore-config
INSTALL = /usr/bin/install -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
LBER_LIB =
LD = /usr/bin/ld -m elf_x86_64
LDAP_LIB =
LDFLAGS =
LIBEV_CFLAGS =
LIBEV_LIBS =
LIBOBJS =
LIBS =
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LIPO =
LN_S = ln -s
LTLIBOBJS =
LUA_CFLAGS =
LUA_LIBS =
MAGICKCORE_LIB = -lMagickCore
MAKEINFO = ${SHELL} /home/saint/mycode/Lighttpd-FastDFS/missing --run makeinfo
MEMCACHE_LIB =
MKDIR_P = /bin/mkdir -p
MYSQL_CONFIG =
MYSQL_INCLUDE =
MYSQL_LIBS =
NM = /usr/bin/nm -B
NMEDIT =
OBJDUMP = objdump
OBJEXT = o
OTOOL =
OTOOL64 =
PACKAGE = lighttpd
PACKAGE_BUGREPORT = contact@lighttpd.net
PACKAGE_NAME = lighttpd
PACKAGE_STRING = lighttpd 1.4.28
PACKAGE_TARNAME = lighttpd
PACKAGE_URL =
PACKAGE_VERSION = 1.4.28
PATH_SEPARATOR = :
PCRECONFIG = /usr/bin/pcre-config
PCRE_LIB = -lpcre
PKG_CONFIG = /usr/bin/pkg-config
RANLIB = ranlib
SED = /bin/sed
SENDFILE_LIB =
SET_MAKE =
SHELL = /bin/sh
SQLITE_CFLAGS =
SQLITE_LIBS =
SSL_LIB =
STRIP = strip
U =
UUID_LIBS =
VERSION = 1.4.28
XML_CFLAGS =
XML_LIBS =
Z_LIB = -lz
abs_builddir = /home/saint/mycode/Lighttpd-FastDFS/tests
abs_srcdir = /home/saint/mycode/Lighttpd-FastDFS/tests
abs_top_builddir = /home/saint/mycode/Lighttpd-FastDFS
abs_top_srcdir = /home/saint/mycode/Lighttpd-FastDFS
ac_ct_CC = gcc
ac_ct_DUMPBIN =
am__include = include
am__leading_dot = .
am__quote =
am__tar = tar --format=ustar -chf - "$$tardir"
am__untar = tar -xf -
bindir = ${exec_prefix}/bin
build = x86_64-unknown-linux-gnu
build_alias =
build_cpu = x86_64
build_os = linux-gnu
build_vendor = unknown
builddir = .
datadir = ${datarootdir}
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dvidir = ${docdir}
exec_prefix = ${prefix}
host = x86_64-unknown-linux-gnu
host_alias =
host_cpu = x86_64
host_os = linux-gnu
host_vendor = unknown
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = ${datarootdir}/info
install_sh = ${SHELL} /home/saint/mycode/Lighttpd-FastDFS/install-sh
libdir = /home/saint/lighttpd1/lib
libexecdir = ${exec_prefix}/libexec
localedir = ${datarootdir}/locale
localstatedir = ${prefix}/var
lt_ECHO = echo
mandir = ${datarootdir}/man
mkdir_p = /bin/mkdir -p
oldincludedir = /usr/include
pdfdir = ${docdir}
prefix = /home/saint/lighttpd1
program_transform_name = s,x,x,
psdir = ${docdir}
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
srcdir = .
sysconfdir = ${prefix}/etc
target = x86_64-unknown-linux-gnu
target_alias =
target_cpu = x86_64
target_os = linux-gnu
target_vendor = unknown
top_build_prefix = ../
top_builddir = ..
top_srcdir = ..
# lighttpd.conf and conformance.pl expect this directory
testdir = $(srcdir)/tmp/lighttpd/
#fcgi_auth_SOURCES = fcgi-auth.c
#fcgi_auth_LDADD = -lfcgi
#fcgi_responder_SOURCES = fcgi-responder.c
#fcgi_responder_LDADD = -lfcgi
TESTS = \
prepare.sh \
run-tests.pl \
cleanup.sh
CONFS = fastcgi-10.conf \
fastcgi-auth.conf \
fastcgi-responder.conf \
fastcgi-13.conf \
bug-06.conf \
bug-12.conf \
core-var-include.t \
var-include.conf \
var-include-sub.conf \
condition.conf \
core-condition.t \
core-request.t \
core-response.t \
core-keepalive.t \
core.t \
mod-proxy.t \
proxy.conf \
mod-secdownload.t \
mod-access.t \
mod-auth.t \
mod-cgi.t \
mod-compress.t \
mod-compress.conf \
mod-fastcgi.t \
mod-redirect.t \
mod-rewrite.t \
mod-userdir.t \
symlink.t \
request.t \
mod-ssi.t \
LightyTest.pm \
mod-setenv.t \
lowercase.t \
lowercase.conf \
cachable.t \
core-404-handler.t \
404-handler.conf
TESTS_ENVIRONMENT = $(srcdir)/wrapper.sh $(srcdir) $(top_builddir)
EXTRA_DIST = wrapper.sh lighttpd.conf \
lighttpd.user \
lighttpd.htpasswd \
SConscript \
$(CONFS) \
$(TESTS)
SUBDIRS = docroot
all: all-recursive
.SUFFIXES:
.SUFFIXES: .c .lo .o .obj
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
&& { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tests/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --foreign tests/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
clean-checkPROGRAMS:
@list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
echo " rm -f" $$list; \
rm -f $$list || exit $$?; \
test -n "$(EXEEXT)" || exit 0; \
list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
echo " rm -f" $$list; \
rm -f $$list
fcgi-auth$(EXEEXT): $(fcgi_auth_OBJECTS) $(fcgi_auth_DEPENDENCIES)
@rm -f fcgi-auth$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(fcgi_auth_OBJECTS) $(fcgi_auth_LDADD) $(LIBS)
fcgi-responder$(EXEEXT): $(fcgi_responder_OBJECTS) $(fcgi_responder_DEPENDENCIES)
@rm -f fcgi-responder$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(fcgi_responder_OBJECTS) $(fcgi_responder_LDADD) $(LIBS)
mostlyclean-compile:
-rm -f *.$(OBJEXT)
distclean-compile:
-rm -f *.tab.c
include ./$(DEPDIR)/fcgi-auth.Po
include ./$(DEPDIR)/fcgi-responder.Po
.c.o:
$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
# $(AM_V_CC) \
# source='$<' object='$@' libtool=no \
# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
# $(COMPILE) -c $<
.c.obj:
$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
# $(AM_V_CC) \
# source='$<' object='$@' libtool=no \
# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
# $(COMPILE) -c `$(CYGPATH_W) '$<'`
.c.lo:
$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
# $(AM_V_CC) \
# source='$<' object='$@' libtool=yes \
# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
# $(LTCOMPILE) -c -o $@ $<
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
@fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
$(RECURSIVE_CLEAN_TARGETS):
@fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
rev=''; for subdir in $$list; do \
if test "$$subdir" = "."; then :; else \
rev="$$subdir $$rev"; \
fi; \
done; \
rev="$$rev ."; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
ctags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
done
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
mkid -fID $$unique
tags: TAGS
TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
check-TESTS: $(TESTS)
@failed=0; all=0; xfail=0; xpass=0; skip=0; \
srcdir=$(srcdir); export srcdir; \
list=' $(TESTS) '; \
$(am__tty_colors); \
if test -n "$$list"; then \
for tst in $$list; do \
if test -f ./$$tst; then dir=./; \
elif test -f $$tst; then dir=; \
else dir="$(srcdir)/"; fi; \
if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
all=`expr $$all + 1`; \
case " $(XFAIL_TESTS) " in \
*[\ \ ]$$tst[\ \ ]*) \
xpass=`expr $$xpass + 1`; \
failed=`expr $$failed + 1`; \
col=$$red; res=XPASS; \
;; \
*) \
col=$$grn; res=PASS; \
;; \
esac; \
elif test $$? -ne 77; then \
all=`expr $$all + 1`; \
case " $(XFAIL_TESTS) " in \
*[\ \ ]$$tst[\ \ ]*) \
xfail=`expr $$xfail + 1`; \
col=$$lgn; res=XFAIL; \
;; \
*) \
failed=`expr $$failed + 1`; \
col=$$red; res=FAIL; \
;; \
esac; \
else \
skip=`expr $$skip + 1`; \
col=$$blu; res=SKIP; \
fi; \
echo "$${col}$$res$${std}: $$tst"; \
done; \
if test "$$all" -eq 1; then \
tests="test"; \
All=""; \
else \
tests="tests"; \
All="All "; \
fi; \
if test "$$failed" -eq 0; then \
if test "$$xfail" -eq 0; then \
banner="$$All$$all $$tests passed"; \
else \
if test "$$xfail" -eq 1; then failures=failure; else failures=failures; fi; \
banner="$$All$$all $$tests behaved as expected ($$xfail expected $$failures)"; \
fi; \
else \
if test "$$xpass" -eq 0; then \
banner="$$failed of $$all $$tests failed"; \
else \
if test "$$xpass" -eq 1; then passes=pass; else passes=passes; fi; \
banner="$$failed of $$all $$tests did not behave as expected ($$xpass unexpected $$passes)"; \
fi; \
fi; \
dashes="$$banner"; \
skipped=""; \
if test "$$skip" -ne 0; then \
if test "$$skip" -eq 1; then \
skipped="($$skip test was not run)"; \
else \
skipped="($$skip tests were not run)"; \
fi; \
test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
dashes="$$skipped"; \
fi; \
report=""; \
if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
report="Please report to $(PACKAGE_BUGREPORT)"; \
test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
dashes="$$report"; \
fi; \
dashes=`echo "$$dashes" | sed s/./=/g`; \
if test "$$failed" -eq 0; then \
echo "$$grn$$dashes"; \
else \
echo "$$red$$dashes"; \
fi; \
echo "$$banner"; \
test -z "$$skipped" || echo "$$skipped"; \
test -z "$$report" || echo "$$report"; \
echo "$$dashes$$std"; \
test "$$failed" -eq 0; \
else :; fi
distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -d "$(distdir)/$$subdir" \
|| $(MKDIR_P) "$(distdir)/$$subdir" \
|| exit 1; \
fi; \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
$(am__relativize); \
new_distdir=$$reldir; \
dir1=$$subdir; dir2="$(top_distdir)"; \
$(am__relativize); \
new_top_distdir=$$reldir; \
echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
($(am__cd) $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$new_top_distdir" \
distdir="$$new_distdir" \
am__remove_distdir=: \
am__skip_length_check=: \
am__skip_mode_fix=: \
distdir) \
|| exit 1; \
fi; \
done
check-am: all-am
$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS)
$(MAKE) $(AM_MAKEFLAGS) check-TESTS
check: check-recursive
all-am: Makefile
installdirs: installdirs-recursive
installdirs-am:
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive
clean-am: clean-checkPROGRAMS clean-generic clean-libtool clean-local \
mostlyclean-am
distclean: distclean-recursive
-rm -rf ./$(DEPDIR)
-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
distclean-tags
dvi: dvi-recursive
dvi-am:
html: html-recursive
html-am:
info: info-recursive
info-am:
install-data-am:
install-dvi: install-dvi-recursive
install-dvi-am:
install-exec-am:
install-html: install-html-recursive
install-html-am:
install-info: install-info-recursive
install-info-am:
install-man:
install-pdf: install-pdf-recursive
install-pdf-am:
install-ps: install-ps-recursive
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -rf ./$(DEPDIR)
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-compile mostlyclean-generic \
mostlyclean-libtool
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
uninstall-am:
.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) check-am \
ctags-recursive install-am install-strip tags-recursive
.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
all all-am check check-TESTS check-am clean \
clean-checkPROGRAMS clean-generic clean-libtool clean-local \
ctags ctags-recursive distclean distclean-compile \
distclean-generic distclean-libtool distclean-tags distdir dvi \
dvi-am html html-am info info-am install install-am \
install-data install-data-am install-dvi install-dvi-am \
install-exec install-exec-am install-html install-html-am \
install-info install-info-am install-man install-pdf \
install-pdf-am install-ps install-ps-am install-strip \
installcheck installcheck-am installdirs installdirs-am \
maintainer-clean maintainer-clean-generic mostlyclean \
mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
pdf pdf-am ps ps-am tags tags-recursive uninstall uninstall-am
leak-check:
for i in $(TESTS); do \
$(srcdir)/$$i; \
echo $$?; \
done
clean-local:
rm -f *.out
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: