Permalink
Switch branches/tags
Nothing to show
Find file Copy path
Fetching contributors…
Cannot retrieve contributors at this time
76 lines (54 sloc) 1.49 KB
/*
RV8523 RTC (Real-Time-Clock) Example
Uno A4 (SDA), A5 (SCL)
Mega 20 (SDA), 21 (SCL)
Leonardo 2 (SDA), 3 (SCL)
Note: To enable the I2C pull-up resistors on the RTC-Breakout, the jumper J1 has to be closed.
*/
#include <Wire.h>
#include <RV8523.h>
RV8523 rtc;
void setup()
{
//init Serial port
Serial.begin(9600);
while(!Serial); //wait for serial port to connect - needed for Leonardo only
//init RTC
Serial.println("Init RTC...");
//set 12 hour mode
// rtc.set12HourMode();
//set 24 hour mode
// rtc.set24HourMode();
//set the date+time (only one time)
// rtc.set(0, 0, 8, 24, 12, 2014); //08:00:00 24.12.2014 //sec, min, hour, day, month, year
//stop/pause RTC
// rtc.stop();
//start RTC
rtc.start();
//When the power source is removed, the RTC will keep the time.
rtc.batterySwitchOver(1); //battery switch over on
//When the power source is removed, the RTC will not keep the time.
// rtc.batterySwitchOver(0); //battery switch over off
}
void loop()
{
uint8_t sec, min, hour, day, month;
uint16_t year;
//get time from RTC
rtc.get(&sec, &min, &hour, &day, &month, &year);
//serial output
Serial.print("\nTime: ");
Serial.print(hour, DEC);
Serial.print(":");
Serial.print(min, DEC);
Serial.print(":");
Serial.print(sec, DEC);
Serial.print("\nDate: ");
Serial.print(day, DEC);
Serial.print(".");
Serial.print(month, DEC);
Serial.print(".");
Serial.print(year, DEC);
//wait a second
delay(1000);
}