Starter-Kit for Microcontroller Boards

Starter-Kit Content

• Component/Project Box from W.AG Funktion + Design

• Microcontroller Board

• Breadboard

• Cable / Connector

  • Jumper Wires for Breadboard
  • Jumper Wires Female/Female
  • Jumper Wires Female/Male
  • Jumper Wires Male/Male
  • 40x1 Pin Header (2.54 mm)

• Resistor (1/4 W)

  • 220 Ohm
  • 1k Ohm
  • 2.2k Ohm
  • 10k Ohm
  • 330k Ohm

• Capacitor

  • 10 nF (ceramic)
  • 100 nF (ceramic)
  • 100 uF (electrolytic, 25 Vdc)

• Diode 1N4007 (Vf = 1 V, If = 1 A / 30 A Peak)

• Optocoupler 4N35 (DIP-8) (Vf = 1.2 V, If = 10 mA, Ic <= 100 mA, Vce <= 30 V, Vec <= 7 V)

• Transistor BC547 (TO-92) (Ic <= 100 mA, Vcb <= 50 V, Vce <= 45 V, Veb <= 5 V)

• Power MOS-FET IRF540N (TO-220) (Id <= 33 A, Vdss <= 100 V, Vgs <= 20 V, 10 A @ Vgs = 4.5V)

• Darlington Transistor Array/Driver ULN2803 (DIP-18) (8 channels/outputs)

• Shift Register 74HC595 (DIP-16) (8 bit serial-in)

• Input / Sensor

  • Temperature: NTC Thermistor 4.7k Ohm (B57164K)

  • Light: LDR 24..300k Ohm (VT93N1)

  • Motion: Tilt Switch (RBS040100)

  • Switch: Push Button 6x6 mm (DTS61)

  • Rotating: Potentiometer 10k Ohm

• Output

  • Sound: Piezo Buzzer / Speaker (PT-1540PM)

  • Motor: RC Servo

  • Visual: 5 mm red LED, 5 mm green LED, 5 mm yellow LED (Vf = 2 V, If = 20 mA)

  • Visual: 7 Segment LED Display (LTS-546AWC)

  • Visual: Intelligent RGB-LED (WS2812)