Skip to content
Example for STM32 HAL driver for for I2C OLED SSD1603 display with U8glib
Branch: master
Clone or download
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Type Name Latest commit message Commit time
Failed to load latest commit information.
.settings
Drivers
Inc
Src
fntsrc
startup
u8glib
.cproject
.gitignore
.mxproject
.project
LICENSE
README.md
SSD1603-example Debug.cfg
SSD1603-example.ioc
SSD1603-example.xml
STM32F103C8Tx_FLASH.ld

README.md

SSD1603-example

Example for STM32 HAL driver for for I2C OLED SSD1603 display with U8glib

This is an example project for I2C OLED SSD1603 display with U8glib. It includes the driver. The driver itself can be found in SSD1603 repository.

The example was prepared under SW4STM32 for STM32F103C8T6 development board and can be easily ported to any other device. Also STM32CubeMX configuration file is included.

How to use it

Prerequisite

You need a board equipped with STM32F103C8T6 MCU and a SSD1603 display with I2C interface.

Connecting display

The module has to be connected with the MCU board with following pins:

MCU pin SX1278 pin Description
PB7 SDA I2C SDA
PB6 SCL I2C SCL
------- ---------- -----------
VDD VCC +3V3
VSS GND GND

Remember to pull--up the SDA and SCL line. One resistor of value 4k7 Ohm will be sufficient.

Compilation

You have to compile it under SW4STM32 or import it into i.e. TrueSTUDIO - Atollic.

Run

The display will show a simple text.

Final remarks

You can visit my blog to read more about the SSD1603 display or my other projects.

You can’t perform that action at this time.