Skip to content
Permalink
master
Switch branches/tags

Name already in use

A tag already exists with the provided branch name. Many Git commands accept both tag and branch names, so creating this branch may cause unexpected behavior. Are you sure you want to create this branch?

tar1090/README-query.md

Go to file
 
 
Cannot retrieve contributors at this time
Query parameters Search / filter Troubleshooting Rendering parameters Toggles heatmap / reaplay (only available with readsb --heatmap parameter)
87 lines (73 sloc) 4.72 KB
Raw Blame
Open in GitHub Desktop

Query parameters

  • The query parameters are appended to the URL you would normally use for tar1090.

  • Before the first query parameter a question mark ? is prepended, for each additional parameter an ampersand & is prepended.

  • Example: http://192.168.x.yy/tar1090/?icao=456789&enableLabels&extendedLabels=2&trackLabels&zoom=11&mapDim=0.4

  • Some parameters need a value. If no value if passed, the default one is used.

  • Some parameters do not take a value. They are active if used in the URL.(hideSideBar, hideButtons, ...).

  • Query parameters in tar1090 are not case sensitive.

Search / filter

  • icao=icao - selects and isolates the selected plane(s). Separate multiple with commas.
  • noIsolation - show other planes and not only the ones selected by ?icao
  • icaoFilter=hex1,hex2,hex3 - Only show the mentioned hex IDs, no other aircraft will ever be displayed
  • reg=registration - Direct link to specific aircraft registration(s). Separate multiple with commas. ?icao is preferred as this option takes longer to load.
  • filterAltMin=500 - filter minimum altitute to 500 ft
  • filterAltMax=5000 - filter maximum altitute to 5000 ft
  • filterCallSign=^(UAL|DAL) - filter callsign to United or Deleta
  • filterType=B738 - filter to aircraft type code B738 aka 737-800
  • filterDescription=L2J - filter aircraft by type description
  • filterIcao=^a - filter icao that start with a
  • filterSources=adsb,uat,adsr,mlat,tisb,modeS - filter palnes by source type.
  • filterDbFlag=military,pia,ladd - filter planes by the db flags.
  • sortBy=column - (possible values: icao, flag, flight, registration, aircraft_type, squawk, altitude, speed, vert_rate, distance, track, msgs, seen, rssi, lat, lon, data_source, military, ws, wd
  • sortByReverse - reverse the sorting specified using sortBy

See the main readme for more exapmles on how to use the filters

Troubleshooting

  • reset - reset page settings
  • showerrors - show errors on screen

Rendering parameters

  • zoom=1-20 - set zoom level.
  • enableLabels - enable labels on aircraft ("L" button).
  • extendedLabels=value - select the labels type ("O" button) / Valid values are 0,1,2.
  • trackLabels - enable track labels ("K" button).
  • labelsGeom - use geometric altitude in track labels
  • geomEGM - show geometric altitudes in EGM96 (MSL) instead of WGS84 (simpler geoid reference)
  • noVanish - persistence mode ("P" button).
  • scale=0.1-x - overall interface scaling.
  • iconScale=0.1-x - scale the aircraft icons. (multiplies with ?scale)
  • labelScale=0.1-x - scale the aircraft labels. (multiplies with ?scale)
  • tempTrails=value - shows temporary trails for ## seconds of history.
  • mapDim=0.1-1.0 - reduce map brightness (negative values increase brightness)
  • mapContrast=0.1-1.0 - increase the map contrast (negative values decrease brightness)
  • filterMaxRange=value - maximum distance of rendered tracks.
  • baseMap=maptype - change the map type (as defined in config.js).
  • mapOrientation=0-360 - normally true north faces up, use this to change which true direction is pointing up.
  • monochromeMarkers=xxxxxx - set constant html color for markers (parameter is an hexadecimal color).
  • monochromeTracks=xxxxxx - set constant html color for tracks (parameter is an hexadecimal color).
  • outlineWidth=value - set width for the for aircraft icons (only works with webGL disabled)
  • outlineColor=xxxxxx - set outline color (parameter is an hexadecimal color, only works with webGL disabled)
  • sidebarWidth=xxx - size of sidebar in pixels.
  • hideSideBar - hides sidebar.
  • hideButtons - hides all buttons.
  • centerReceiver - conter the view on receiver position.
  • nowebgl - force rendering without WebGL.
  • tableInView - button V / only show aircraft in view in the table
  • screenshot - For automatic screenshotting, disables updates after the first load of all aircraft in view
  • SiteLat=45.0 SiteLon=10.0 - Override the receiver location for this visit

Toggles

  • mil - Military/Interesting.
  • tempTrails - enable temporary aircraft trails / tracks.
  • mobile - Force mobile view.
  • desktop - force desktop view.
  • kiosk - force kiosk mode (tempTrails=true / hideButtons=true / userScale=2).
  • allTracks - enable tracks as if pressing T

heatmap / reaplay (only available with readsb --heatmap parameter)

  • replay - replay history of all planes

  • heatmap - show a heatmap for the last 24h by default (optional: supply the maximum number of dots drawn, default 32000)

  • heatDuration - how many hours to show in the heatmap

  • heatEnd - how many hours to shift the heatmap time window into the past

  • heatAlpha - 0.1 to 1.0 - how transparent the dots will be

  • heatRadius - dot size for heatmap

  • heatManualRedraw - only redraw dots when pressing r

  • realHeat - real heatmap instead of dots

  • heatBlur - parameter for realHeat

  • heatWeight - parameter for realHeat