sys.executable: =============================================================================== /usr/bin/python sys.version_info: =============================================================================== sys.version_info(major=2, minor=7, micro=12, releaselevel='final', serial=0) multiprocessing.cpu_count: =============================================================================== 4 platform.uname: =============================================================================== ('Linux', 'odroid64', '3.14.79-108', '#1 SMP PREEMPT Mon Feb 27 23:18:26 BRT 2017', 'aarch64', 'aarch64') platform.architecture: =============================================================================== ('64bit', 'ELF') platform.system: =============================================================================== Linux platform.machine: =============================================================================== aarch64 cpufreq-info: =============================================================================== cpufrequtils 008: cpufreq-info (C) Dominik Brodowski 2004-2009 Report errors and bugs to cpufreq@vger.kernel.org, please. analyzing CPU 0: driver: meson_cpufreq CPUs which run at the same hardware frequency: 0 1 2 3 CPUs which need to have their frequency coordinated by software: 0 1 2 3 maximum transition latency: 200 us. hardware limits: 100.0 MHz - 1.54 GHz available frequency steps: 100.0 MHz, 250 MHz, 500 MHz, 1000 MHz, 1.30 GHz, 1.54 GHz available cpufreq governors: hotplug, interactive, conservative, ondemand, userspace, powersave, performance current policy: frequency should be within 100.0 MHz and 1.54 GHz. The governor "interactive" may decide which speed to use within this range. current CPU frequency is 1.54 GHz. cpufreq stats: 100.0 MHz:0.00%, 250 MHz:0.00%, 500 MHz:0.00%, 1000 MHz:0.00%, 1.30 GHz:0.00%, 1.54 GHz:100.00% (439) analyzing CPU 1: driver: meson_cpufreq CPUs which run at the same hardware frequency: 0 1 2 3 CPUs which need to have their frequency coordinated by software: 0 1 2 3 maximum transition latency: 200 us. hardware limits: 100.0 MHz - 1.54 GHz available frequency steps: 100.0 MHz, 250 MHz, 500 MHz, 1000 MHz, 1.30 GHz, 1.54 GHz available cpufreq governors: hotplug, interactive, conservative, ondemand, userspace, powersave, performance current policy: frequency should be within 100.0 MHz and 1.54 GHz. The governor "interactive" may decide which speed to use within this range. current CPU frequency is 1.54 GHz. cpufreq stats: 100.0 MHz:0.00%, 250 MHz:0.00%, 500 MHz:0.00%, 1000 MHz:0.00%, 1.30 GHz:0.00%, 1.54 GHz:100.00% (439) analyzing CPU 2: driver: meson_cpufreq CPUs which run at the same hardware frequency: 0 1 2 3 CPUs which need to have their frequency coordinated by software: 0 1 2 3 maximum transition latency: 200 us. hardware limits: 100.0 MHz - 1.54 GHz available frequency steps: 100.0 MHz, 250 MHz, 500 MHz, 1000 MHz, 1.30 GHz, 1.54 GHz available cpufreq governors: hotplug, interactive, conservative, ondemand, userspace, powersave, performance current policy: frequency should be within 100.0 MHz and 1.54 GHz. The governor "interactive" may decide which speed to use within this range. current CPU frequency is 1.54 GHz. cpufreq stats: 100.0 MHz:0.00%, 250 MHz:0.00%, 500 MHz:0.00%, 1000 MHz:0.00%, 1.30 GHz:0.00%, 1.54 GHz:100.00% (439) analyzing CPU 3: driver: meson_cpufreq CPUs which run at the same hardware frequency: 0 1 2 3 CPUs which need to have their frequency coordinated by software: 0 1 2 3 maximum transition latency: 200 us. hardware limits: 100.0 MHz - 1.54 GHz available frequency steps: 100.0 MHz, 250 MHz, 500 MHz, 1000 MHz, 1.30 GHz, 1.54 GHz available cpufreq governors: hotplug, interactive, conservative, ondemand, userspace, powersave, performance current policy: frequency should be within 100.0 MHz and 1.54 GHz. The governor "interactive" may decide which speed to use within this range. current CPU frequency is 1.54 GHz. cpufreq stats: 100.0 MHz:0.00%, 250 MHz:0.00%, 500 MHz:0.00%, 1000 MHz:0.00%, 1.30 GHz:0.00%, 1.54 GHz:100.00% (439) cat /proc/cpuinfo: =============================================================================== processor : 0 BogoMIPS : 2.00 Features : fp asimd crc32 CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4 processor : 1 BogoMIPS : 2.00 Features : fp asimd crc32 CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4 processor : 2 BogoMIPS : 2.00 Features : fp asimd crc32 CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4 processor : 3 BogoMIPS : 2.00 Features : fp asimd crc32 CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4 Hardware : ODROID-C2 Revision : 020c sysctl machdep.cpu hw.cpufrequency: =============================================================================== sysctl hw.model hw.machine: =============================================================================== lscpu: =============================================================================== Architecture: aarch64 Byte Order: Little Endian CPU(s): 4 On-line CPU(s) list: 0-3 Thread(s) per core: 1 Core(s) per socket: 1 Socket(s): 4 CPU max MHz: 1536.0000 CPU min MHz: 100.0000 dmesg: =============================================================================== [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.14.79-108 (root@a53_b1) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.1) ) #1 SMP PREEMPT Mon Feb 27 23:18:26 BRT 2017 [ 0.000000] CPU: AArch64 Processor [410fd034] revision 4 [ 0.000000] secmon: share mem setup [ 0.000000] Reserved memory: initialized node linux,secmon, compatible id aml_secmon_memory [ 0.000000] __reserved_mem_alloc_size: linux,meson-fb [ 0.000000] fb: Reserved memory: created fb at 0x0000000078000000, size 128 MiB [ 0.000000] Reserved memory: initialized node linux,meson-fb, compatible id amlogic, fb-memory [ 0.000000] __reserved_mem_alloc_size: linux,di [ 0.000000] DI reserved memory: created CMA memory pool at 0x0000000076200000, size 30 MiB [ 0.000000] Reserved memory: initialized node linux,di, compatible id amlogic, di-mem [ 0.000000] __reserved_mem_alloc_size: linux,ion-dev [ 0.000000] linux,ion-dev add multi user:ffffffc001d20568 [ 0.000000] ion_dev mem setup [ 0.000000] Reserved memory: initialized node linux,ion-dev, compatible id amlogic, idev-mem [ 0.000000] ppmgr share mem setup [ 0.000000] linux,ion-dev add multi user:ffffffc001d290f0 [ 0.000000] Reserved memory: initialized node linux,ion-dev, compatible id amlogic, idev-mem [ 0.000000] __reserved_mem_alloc_size: linux,codec_mm_cma [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000067800000, size 188 MiB [ 0.000000] Reserved memory: initialized node linux,codec_mm_cma, compatible id shared-dma-pool [ 0.000000] __reserved_mem_alloc_size: linux,picdec [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000064800000, size 48 MiB [ 0.000000] Reserved memory: initialized node linux,picdec, compatible id shared-dma-pool [ 0.000000] __reserved_mem_alloc_size: linux,codec_mm_reserved [ 0.000000] codec_mm:vdec: reserved mem setup [ 0.000000] Reserved memory: initialized node linux,codec_mm_reserved, compatible id amlogic, codec-mm-reserved [ 0.000000] cma: Reserved 8 MiB at 5fc00000 [ 0.000000] On node 0 totalpages: 486912 [ 0.000000] Normal zone: 8568 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 486912 pages, LIFO batch:31 [ 0.000000] psci: probing function IDs from device-tree [ 0.000000] PERCPU: Embedded 12 pages/cpu @ffffffc074195000 s19584 r8192 d21376 u49152 [ 0.000000] pcpu-alloc: s19584 r8192 d21376 u49152 alloc=12*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 478344 [ 0.000000] Kernel command line: root=UUID=e139ce78-9841-40fe-8823-96a304a09859 rootwait ro console=ttyS0,115200n8 console=tty0 no_console_suspend hdmimode=1080p60hz m_bpp=32 vout=dvi fsck.repair=yes net.ifnames=0 elevator=noop disablehpd=true max_freq=1536 maxcpus=4 monitor_onoff=false disableuhs=false mmc_removable=true usbmulticam=false [ 0.000000] logo: get hdmimode: 1080p60hz [ 0.000000] dvfs [get_max_freq] - max_freq : 1536000000 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] Memory: 1498460K/1947648K available (8304K kernel code, 900K rwdata, 3036K rodata, 907K init, 4228K bss, 449188K reserved) [ 0.000000] Virtual kernel memory layout: vmalloc : 0xffffff8000000000 - 0xffffff8040000000 ( 1024 MB) vmemmap : 0xffffff8040010000 - 0xffffff80421d0000 ( 33 MB) modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB) memory : 0xffffffc000000000 - 0xffffffc078000000 ( 1920 MB) .init : 0xffffffc001b95000 - 0xffffffc001c77c80 ( 908 kB) .text : 0xffffffc001080000 - 0xffffffc001b94204 ( 11345 kB) .data : 0xffffffc001c78000 - 0xffffffc001d59280 ( 901 kB) [ 0.000000] SLUB: HWalign=64, Order=0-1, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000005] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483648000ns [ 0.000025] mclk->mux_reg =ffffff8000002990,mclk->reg =ffffff800000a994 [ 0.000073] local timer MESON TIMER-G mclk->mux_reg =ffffff8000002990,mclk->reg =ffffff800000c998 [ 0.000094] local timer MESON TIMER-H mclk->mux_reg =ffffff8000002990,mclk->reg =ffffff800000e99c [ 0.000115] local timer MESON TIMER-I mclk->mux_reg =ffffff8000002990,mclk->reg =ffffff80000109a0 [ 0.000126] Switching to timer-based delay loop [ 0.000359] Console: colour dummy device 80x25 [ 0.000864] console [tty0] enabled [ 0.003220] allocated 8388608 bytes of page_cgroup [ 0.003229] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.003248] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000) [ 0.003266] pid_max: default: 32768 minimum: 301 [ 0.003348] Security Framework initialized [ 0.003376] AppArmor: AppArmor initialized [ 0.003414] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.003427] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.003858] Initializing cgroup subsys debug [ 0.003873] Initializing cgroup subsys memory [ 0.003892] Initializing cgroup subsys devices [ 0.003904] Initializing cgroup subsys freezer [ 0.003915] Initializing cgroup subsys net_cls [ 0.003924] Initializing cgroup subsys blkio [ 0.003933] Initializing cgroup subsys perf_event [ 0.003945] Initializing cgroup subsys net_prio [ 0.003955] Initializing cgroup subsys hugetlb [ 0.003996] ftrace: allocating 29798 entries in 117 pages [ 0.029760] /cpus/cpu@0: Missing clock-frequency property [ 0.029791] /cpus/cpu@1: Missing clock-frequency property [ 0.029803] /cpus/cpu@2: Missing clock-frequency property [ 0.029815] /cpus/cpu@3: Missing clock-frequency property [ 0.029829] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available [ 0.061849] Meson chip version = RevC (1F:C - 0:0) [ 0.080805] CPU1: Booted secondary processor [ 0.100785] CPU2: Booted secondary processor [ 0.120775] CPU3: Booted secondary processor [ 0.120829] Brought up 4 CPUs [ 0.120858] SMP: Total of 4 processors activated. [ 0.121358] devtmpfs: initialized [ 0.133560] pinctrl core: initialized pinctrl subsystem [ 0.133832] regulator-dummy: no parameters [ 0.135611] device-tree: Duplicate name in efusekey, renamed to "key0#1" [ 0.135641] device-tree: Duplicate name in efusekey, renamed to "key1#1" [ 0.135671] device-tree: Duplicate name in efusekey, renamed to "key2#1" [ 0.135698] device-tree: Duplicate name in efusekey, renamed to "key3#1" [ 0.137618] NET: Registered protocol family 16 [ 0.138439] register canvas platform driver [ 0.138450] codec:ignore bus ops for cpu=25 [ 0.138457] codec:ignore bus ops for cpu=29 [ 0.138466] codec:register amports ops for bus[0] [ 0.138474] codec:register amports ops for bus[4] [ 0.138482] codec:register amports ops for bus[3] [ 0.138490] codec:register amports ops for bus[2] [ 0.138497] codec:register amports ops for bus[1] [ 0.138505] codec:register amports ops for bus[13] [ 0.138513] codec:register amports ops for bus[2] [ 0.138521] codec:register amports ops for bus[14] [ 0.138549] register rdma platform driver [ 0.139029] vdso: 2 pages (1 code, 1 data) at base ffffffc001c7e000 [ 0.139061] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.139590] DMA: preallocated 256 KiB pool for atomic allocations [ 0.140868] software IO TLB [mem 0x5c400000-0x5c800000] (4MB) mapped at [ffffffc05c400000-ffffffc05c7fffff] [ 0.140883] Serial: AMBA PL011 UART driver [ 0.140970] hdmitx: system: amhdmitx_init [ 0.140979] hdmitx: system: Ver: 2014May6 [ 0.141010] tv_vout: tv_init_module [ 0.141021] tv_vout: major number 254 for disp [ 0.141030] vout_notify: vout_register_server [ 0.141037] tv_vout: register tv module server ok [ 0.141065] codec_mm:codec_mm_module_init [ 0.141187] gxbb clk HIU base is 0xffffff800005a000 [ 0.141196] gxbb clk ao base is 0xffffff800005c000 [ 0.141234] register mpll_clk_out0 success done [ 0.141245] register mpll_clk_out1 success done [ 0.141256] register mpll_clk_out2 success done [ 0.141423] register sys pll success done [ 0.141465] clkrate [ xtal ] : 24000000Hz [ 0.141474] clkrate [ 32Khz ] : 32000Hz [ 0.141482] clkrate [ clk81 ] : 166666666Hz [ 0.141490] clkrate [ fixed_pll ] : 2000000000Hz [ 0.141498] clkrate [ fclk_div2 ] : 1000000000Hz [ 0.141506] clkrate [ fclk_div3 ] : 666666000Hz [ 0.141514] clkrate [ fclk_div4 ] : 500000000Hz [ 0.141522] clkrate [ fclk_div5 ] : 400000000Hz [ 0.141530] clkrate [ fclk_div7 ] : 285714000Hz [ 0.141559] gxbb clock initialization complete [ 0.141667] msr_clk_reg0=ffffff800005e75c,msr_clk_reg2=ffffff800006a764 [ 0.142531] amlogic iomap probe done [ 0.142781] Init pinux probe! [ 0.143522] pinmux-gxbb c1109880.pinmux: Probed amlogic pinctrl driver [ 0.143775] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xb8) [ 0.143795] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xb8) [ 0.143858] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xb8) [ 0.143878] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xb8) [ 0.144062] dvfs [scpi_dvfs_get_opps] - new count 6, max_freq 1536000000 [ 0.144498] codec:codec map io source 0x00000000c1100000,size=1048576 to 0xffffff8000680000 [ 0.144519] codec:codec map io source 0x00000000c8820000,size=65536 to 0xffffff80000a0000 [ 0.144537] codec:codec map io source 0x00000000c883c000,size=8192 to 0xffffff8000094000 [ 0.144566] codec:codec map io source 0x00000000c8100000,size=1048576 to 0xffffff8000800000 [ 0.144586] codec:codec map io source 0x00000000d0100000,size=262144 to 0xffffff8000980000 [ 0.144603] codec:codec map io source 0x00000000c8838000,size=1024 to 0xffffff8000092000 [ 0.144664] codec_mm has 2 memory regions [ 0.144679] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma ok [ 0.144694] codec_mm:codec_mm_reserved_init 0000000060700000->0000000064800000 [ 0.144707] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_reserved ok [ 0.144718] codec_mm:codec_mm_probe mem init done [ 0.144728] codec_mm:add reserve memory 0000000060700000(aligned 0000000060700000) size=4100000(aligned 4100000) [ 0.144755] codec_mm has 2 memory regions [ 0.144766] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma ok [ 0.144779] codec_mm:codec_mm_reserved_init 0000000060700000->0000000064800000 [ 0.144792] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_reserved ok [ 0.144803] codec_mm:codec_mm reserved memory probed done [ 0.144811] codec_mm:codec_mm_probe ok [ 0.145381] VPU driver version: v01 [ 0.145391] vpu driver detect cpu type: gxbaby [ 0.145407] load vpu_clk in dts: 666667000Hz(7) [ 0.145432] vpu_probe OK [ 0.145620] hdmitx: system: amhdmitx_probe [ 0.145837] hdmitx hpd irq = 89 [ 0.146029] hdmitx20: Mapped PHY: 0xc0800000 [ 0.146040] hdmitx20: Mapped PHY: 0xc1104400 [ 0.146062] hdmitx20: Mapped PHY: 0xc8100000 [ 0.146071] hdmitx20: Mapped PHY: 0xc8834000 [ 0.146080] hdmitx20: Mapped PHY: 0xc883a000 [ 0.146088] hdmitx20: Mapped PHY: 0xc883c000 [ 0.146101] hdmitx20: Mapped PHY: 0xd0100000 [ 0.146110] hdmitx20: Mapped PHY: 0xda83a000 [ 0.146125] hdmitx: alread display in uboot 0x10 [ 0.146150] avmute set to 1 [ 0.146484] canvas_probe reg=00000000c8838000,size=400 [ 0.146500] canvas maped reg_base =ffffff800009e000 [ 0.149914] rdma_probe [ 0.181418] bio: create slab at 0 [ 0.181876] SCSI subsystem initialized [ 0.182025] usbcore: registered new interface driver usbfs [ 0.182064] usbcore: registered new interface driver hub [ 0.182128] usbcore: registered new device driver usb [ 0.182195] media: Linux media interface: v0.10 [ 0.182225] Linux video capture interface: v2.00 [ 0.182273] pps_core: LinuxPPS API ver. 1 registered [ 0.182282] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.182303] PTP clock support registered [ 0.182463] logo: logo_init [ 0.182512] Advanced Linux Sound Architecture Driver Initialized. [ 0.182818] Bluetooth: Core ver 2.18 [ 0.182841] NET: Registered protocol family 31 [ 0.182850] Bluetooth: HCI device and connection manager initialized [ 0.182864] Bluetooth: HCI socket layer initialized [ 0.182875] Bluetooth: L2CAP socket layer initialized [ 0.182899] Bluetooth: SCO socket layer initialized [ 0.182913] NetLabel: Initializing [ 0.182920] NetLabel: domain hash size = 128 [ 0.182928] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.182967] NetLabel: unlabeled traffic allowed by default [ 0.183616] Switched to clocksource Timer-E [ 0.206120] AppArmor: AppArmor Filesystem Enabled [ 0.210480] NET: Registered protocol family 2 [ 0.210963] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.211060] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.211278] TCP: Hash tables configured (established 16384 bind 16384) [ 0.211349] TCP: reno registered [ 0.211361] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.211403] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.211573] NET: Registered protocol family 1 [ 0.211770] RPC: Registered named UNIX socket transport module. [ 0.211780] RPC: Registered udp transport module. [ 0.211789] RPC: Registered tcp transport module. [ 0.211797] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.211955] Unpacking initramfs... [ 0.473783] hdmitx: plugin [ 0.504934] Freeing initrd memory: 9392K (ffffffc0735fb000 - ffffffc073f27000) [ 0.509182] kvm [1]: Using HYP init bounce page @5bd0c000 [ 0.509379] kvm [1]: interrupt-controller@c4304000 IRQ25 [ 0.509591] kvm [1]: kvm_arch_timer: can't find DT node [ 0.509623] kvm [1]: error initializing Hyp mode: -19 [ 0.510133] futex hash table entries: 1024 (order: 5, 131072 bytes) [ 0.510243] audit: initializing netlink subsys (disabled) [ 0.510313] audit: type=2000 audit(0.500:1): initialized [ 0.510871] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.515073] VFS: Disk quotas dquot_6.5.2 [ 0.515227] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.517004] NFS: Registering the id_resolver key type [ 0.517052] Key type id_resolver registered [ 0.517061] Key type id_legacy registered [ 0.517077] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.517107] msgmni has been set to 3433 [ 0.518026] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.518104] io scheduler noop registered (default) [ 0.518115] io scheduler deadline registered [ 0.518140] io scheduler cfq registered [ 0.538267] hdmitx: edid: raw data are all zeroes [ 0.538290] EDID Parser: [ 0.538329] EDID BlockCount=0 [ 0.538335] hdmitx: edid: HDMI: set default vic [ 0.538350] hdmitx: video: get current mode: null [ 0.538359] hdmtix: set audio [ 0.538372] hdmitx tx_aud_src = 0 [ 0.538405] hdmitx aud_n_para = 24576 [ 0.538427] hdmitx set channel status [ 0.540595] meson-rng c8834000.rng: hwrng registered [ 0.540735] [drm] Initialized drm 1.1.0 20060810 [ 0.540772] mali-utgard d00c0000.mali: max pp is 3 [ 0.540783] mali-utgard d00c0000.mali: min pp is 3 [ 0.540793] mali-utgard d00c0000.mali: min clk is 4 [ 0.540809] mali-utgard d00c0000.mali: hiu io source 0xffffff80000d2000 [ 0.540824] mali-utgard d00c0000.mali: hiu io source 0xffffff80000e8000 [ 0.540836] mali-utgard d00c0000.mali: num of pp used most of time 3 [ 0.540847] mali-utgard d00c0000.mali: clock dvfs table size is 6 [ 0.540858] mali-utgard d00c0000.mali: max clk set 4 [ 0.540867] mali-utgard d00c0000.mali: max clk is 4 [ 0.540877] mali-utgard d00c0000.mali: turbo clk set to 5 [ 0.540887] mali-utgard d00c0000.mali: turbo clk is 5 [ 0.540897] mali-utgard d00c0000.mali: default clk is 4 [ 0.540956] mali-utgard d00c0000.mali: ====================0==================== clk_freq= 125000000, clk_parent=fclk_div4, voltage=1150, keep_count=5, threshod=<30 120>, clk_sample=125 [ 0.540982] mali-utgard d00c0000.mali: ====================1==================== clk_freq= 285000000, clk_parent=fclk_div7, voltage=1150, keep_count=5, threshod=<100 190>, clk_sample=285 [ 0.541007] mali-utgard d00c0000.mali: ====================2==================== clk_freq= 400000000, clk_parent=fclk_div5, voltage=1150, keep_count=5, threshod=<152 207>, clk_sample=400 [ 0.541033] mali-utgard d00c0000.mali: ====================3==================== clk_freq= 500000000, clk_parent=fclk_div4, voltage=1150, keep_count=5, threshod=<180 220>, clk_sample=500 [ 0.541058] mali-utgard d00c0000.mali: ====================4==================== clk_freq= 666000000, clk_parent=fclk_div3, voltage=1150, keep_count=5, threshod=<210 236>, clk_sample=666 [ 0.541083] mali-utgard d00c0000.mali: ====================5==================== clk_freq= 792000000, clk_parent= gp0_pll, voltage=1150, keep_count=5, threshod=<230 255>, clk_sample=792 [ 0.542529] gpu cooling register okay with err=0 [ 0.542572] gpu core cooling register okay with err=0 [ 0.542733] Mali: Mali device driver loaded [ 0.542857] UMP: UMP device driver -jenkins-deb_s905_kernel-108 loaded [ 0.545176] loop: module loaded [ 0.545491] mtdoops: mtd device (mtddev=name/number) must be supplied [ 0.553721] libphy: stmmac: probed [ 0.553745] eth0: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active [ 0.553756] eth0: PHY ID 001cc916 at 7 IRQ POLL (stmmac-0:07) [ 0.554053] usbcore: registered new interface driver cdc_ether [ 0.554106] usbcore: registered new interface driver cdc_ncm [ 0.554205] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.554217] ehci-h20ahb: H20AHB-EHCI Host Controller driver [ 0.554297] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.554356] usbcore: registered new interface driver cdc_acm [ 0.554365] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 0.554409] usbcore: registered new interface driver usb-storage [ 0.554497] usbcore: registered new interface driver usbserial [ 0.554528] usbcore: registered new interface driver usbserial_generic [ 0.554555] usbserial: USB Serial support registered for generic [ 0.554779] mousedev: PS/2 mouse device common for all mice [ 0.555022] i2c /dev entries driver [ 0.555565] ledtrig-cpu: registered to indicate activity on CPUs [ 0.555619] hidraw: raw HID events driver (C) Jiri Kosina [ 0.555749] usbcore: registered new interface driver usbhid [ 0.555758] usbhid: USB HID core driver [ 0.555889] ==uart0 reg addr = ffffff80002244c0 [ 0.555914] c81004c0.serial: ttyS0 at MMIO 0xc81004c0 (irq = 225, base_baud = 1500000) is a meson_uart [ 2.255683] console [ttyS0] enabled [ 2.259300] ==uart1 reg addr = ffffff80002264c0 [ 2.263629] c11084c0.serial: ttyS1 at MMIO 0xc11084c0 (irq = 58, base_baud = 1500000) is a meson_uart [ 2.272955] enter cpufreq [ 2.275444] probe cpufreq okay [ 2.278638] dvfs [scpi_dvfs_get_opps] - new count 6, max_freq 1536000000 [ 2.326102] dwc_otg: usb1: type: 1 speed: 0, config: 0, dma: 0, id: 1, phy: c0000020, ctrl: 0 [ 2.331630] dwc_otg: Core Release: 3.10a [ 2.332842] dwc_otg: Setting default values for core params [ 2.338379] dwc_otg: curmode: 1, host_only: 1 [ 2.344863] dwc_otg: Using Buffer DMA mode [ 2.346728] dwc_otg: OTG VER PARAM: 1, OTG VER