From 01fd7e12f8fb1fe95cc650df680ed87435bbf24e Mon Sep 17 00:00:00 2001 From: Shenwei Wang Date: Fri, 5 Aug 2022 09:45:29 -0500 Subject: [PATCH] serial: fsl_lpuart: RS485 RTS polariy is inverse commit 846651eca073e2e02e37490a4a52752415d84781 upstream. The setting of RS485 RTS polarity is inverse in the current driver. When the property of 'rs485-rts-active-low' is enabled in the dts node, the RTS signal should be LOW during sending. Otherwise, if there is no such a property, the RTS should be HIGH during sending. Fixes: 03895cf41d18 ("tty: serial: fsl_lpuart: Add support for RS-485") Cc: stable Signed-off-by: Nicolas Diaz Signed-off-by: Shenwei Wang Link: https://lore.kernel.org/r/20220805144529.604856-1-shenwei.wang@nxp.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/fsl_lpuart.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index 4155bd10711da..127dd937ee51b 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -1381,9 +1381,9 @@ static int lpuart_config_rs485(struct uart_port *port, * Note: UART is assumed to be active high. */ if (rs485->flags & SER_RS485_RTS_ON_SEND) - modem &= ~UARTMODEM_TXRTSPOL; - else if (rs485->flags & SER_RS485_RTS_AFTER_SEND) modem |= UARTMODEM_TXRTSPOL; + else if (rs485->flags & SER_RS485_RTS_AFTER_SEND) + modem &= ~UARTMODEM_TXRTSPOL; } /* Store the new configuration */