From 297e48ccf1668ff36a6e24c90f0c137afc30b272 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sun, 6 Dec 2020 14:54:44 +0200 Subject: [PATCH] mac80211: don't set set TDLS STA bandwidth wider than possible [ Upstream commit f65607cdbc6b0da356ef5a22552ddd9313cf87a0 ] When we set up a TDLS station, we set sta->sta.bandwidth solely based on the capabilities, because the "what's the current bandwidth" check is bypassed and only applied for other types of stations. This leads to the unfortunate scenario that the sta->sta.bandwidth is 160 MHz if both stations support it, but we never actually configure this bandwidth unless the AP is already using 160 MHz; even for wider bandwidth support we only go up to 80 MHz (at least right now.) For iwlwifi, this can also lead to firmware asserts, telling us that we've configured the TX rates for a higher bandwidth than is actually available due to the PHY configuration. For non-TDLS, we check against the interface's requested bandwidth, but we explicitly skip this check for TDLS to cope with the wider BW case. Change this to (a) still limit to the TDLS peer's own chandef, which gets factored into the overall PHY configuration we request from the driver, and (b) limit it to when the TDLS peer is authorized, because it's only factored into the channel context in this case. Fixes: 504871e602d9 ("mac80211: fix bandwidth computation for TDLS peers") Signed-off-by: Johannes Berg Signed-off-by: Luca Coelho Link: https://lore.kernel.org/r/iwlwifi.20201206145305.fcc7d29c4590.I11f77e9e25ddf871a3c8d5604650c763e2c5887a@changeid Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin --- net/mac80211/vht.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/net/mac80211/vht.c b/net/mac80211/vht.c index aabc63dadf176..cea83fa5fc5b9 100644 --- a/net/mac80211/vht.c +++ b/net/mac80211/vht.c @@ -446,12 +446,18 @@ enum ieee80211_sta_rx_bandwidth ieee80211_sta_cur_vht_bw(struct sta_info *sta) * IEEE80211-2016 specification makes higher bandwidth operation * possible on the TDLS link if the peers have wider bandwidth * capability. + * + * However, in this case, and only if the TDLS peer is authorized, + * limit to the tdls_chandef so that the configuration here isn't + * wider than what's actually requested on the channel context. */ if (test_sta_flag(sta, WLAN_STA_TDLS_PEER) && - test_sta_flag(sta, WLAN_STA_TDLS_WIDER_BW)) - return bw; - - bw = min(bw, ieee80211_chan_width_to_rx_bw(bss_width)); + test_sta_flag(sta, WLAN_STA_TDLS_WIDER_BW) && + test_sta_flag(sta, WLAN_STA_AUTHORIZED) && + sta->tdls_chandef.chan) + bw = min(bw, ieee80211_chan_width_to_rx_bw(sta->tdls_chandef.width)); + else + bw = min(bw, ieee80211_chan_width_to_rx_bw(bss_width)); return bw; }