diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts index 65bad39ecda83..0e50661c1b4c1 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts @@ -20,6 +20,8 @@ }; &gpio_keys { + pinctrl-0 = <&focus_n &snapshot_n &vol_down_n &g_assist_n>; + g-assist-key { label = "Google Assistant Key"; linux,code = ; @@ -48,6 +50,14 @@ "SP_ARI_PWR_ALARM", "NC", "NC"; /* GPIO_10 */ + + g_assist_n: g-assist-n-state { + pins = "gpio6"; + function = "normal"; + power-source = <1>; + bias-pull-up; + input-enable; + }; }; &pm8150b_gpios { diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi index 390b90a8ddf70..259798a959749 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi @@ -51,12 +51,26 @@ gpio_keys: gpio-keys { compatible = "gpio-keys"; - /* - * Camera focus (light press) and camera snapshot (full press) - * seem not to work properly.. Adding the former one stalls the CPU - * and the latter kills the volume down key for whatever reason. In any - * case, they are both on &pm8150b_gpios: camera focus(2), camera snapshot(1). - */ + pinctrl-0 = <&focus_n &snapshot_n &vol_down_n>; + pinctrl-names = "default"; + + key-camera-focus { + label = "Camera Focus"; + linux,code = ; + gpios = <&pm8150b_gpios 2 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + gpio-key,wakeup; + }; + + key-camera-snapshot { + label = "Camera Snapshot"; + linux,code = ; + gpios = <&pm8150b_gpios 1 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + gpio-key,wakeup; + }; key-vol-down { label = "Volume Down"; @@ -546,6 +560,34 @@ vdda-pll-supply = <&vreg_l9a_1p2>; }; +&pm8150_gpios { + vol_down_n: vol-down-n-state { + pins = "gpio1"; + function = "normal"; + power-source = <0>; + bias-pull-up; + input-enable; + }; +}; + +&pm8150b_gpios { + snapshot_n: snapshot-n-state { + pins = "gpio1"; + function = "normal"; + power-source = <0>; + bias-pull-up; + input-enable; + }; + + focus_n: focus-n-state { + pins = "gpio2"; + function = "normal"; + power-source = <0>; + bias-pull-up; + input-enable; + }; +}; + &pon_pwrkey { status = "okay"; };