From 6d22a96d12d736971d5b3e5007956fec5724f27e Mon Sep 17 00:00:00 2001 From: Erik Ekman Date: Sun, 28 Nov 2021 13:37:11 +0100 Subject: [PATCH] net/mlx4_en: Update reported link modes for 1/10G [ Upstream commit 2191b1dfef7d45f44b5008d2148676d9f2c82874 ] When link modes were initially added in commit 2c762679435dc ("net/mlx4_en: Use PTYS register to query ethtool settings") and later updated for the new ethtool API in commit 3d8f7cc78d0eb ("net: mlx4: use new ETHTOOL_G/SSETTINGS API") the only 1/10G non-baseT link modes configured were 1000baseKX, 10000baseKX4 and 10000baseKR. It looks like these got picked to represent other modes since nothing better was available. Switch to using more specific link modes added in commit 5711a98221443 ("net: ethtool: add support for 1000BaseX and missing 10G link modes"). Tested with MCX311A-XCAT connected via DAC. Before: % sudo ethtool enp3s0 Settings for enp3s0: Supported ports: [ FIBRE ] Supported link modes: 1000baseKX/Full 10000baseKR/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: 1000baseKX/Full 10000baseKR/Full Advertised pause frame use: Symmetric Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: 10000Mb/s Duplex: Full Auto-negotiation: off Port: Direct Attach Copper PHYAD: 0 Transceiver: internal Supports Wake-on: d Wake-on: d Current message level: 0x00000014 (20) link ifdown Link detected: yes With this change: % sudo ethtool enp3s0 Settings for enp3s0: Supported ports: [ FIBRE ] Supported link modes: 1000baseX/Full 10000baseCR/Full 10000baseSR/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: 1000baseX/Full 10000baseCR/Full 10000baseSR/Full Advertised pause frame use: Symmetric Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: 10000Mb/s Duplex: Full Auto-negotiation: off Port: Direct Attach Copper PHYAD: 0 Transceiver: internal Supports Wake-on: d Wake-on: d Current message level: 0x00000014 (20) link ifdown Link detected: yes Tested-by: Michael Stapelberg Signed-off-by: Erik Ekman Reviewed-by: Tariq Toukan Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/ethernet/mellanox/mlx4/en_ethtool.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c index 3616b77caa0ad..01275c376721c 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c @@ -663,7 +663,7 @@ void __init mlx4_en_init_ptys2ethtool_map(void) MLX4_BUILD_PTYS2ETHTOOL_CONFIG(MLX4_1000BASE_T, SPEED_1000, ETHTOOL_LINK_MODE_1000baseT_Full_BIT); MLX4_BUILD_PTYS2ETHTOOL_CONFIG(MLX4_1000BASE_CX_SGMII, SPEED_1000, - ETHTOOL_LINK_MODE_1000baseKX_Full_BIT); + ETHTOOL_LINK_MODE_1000baseX_Full_BIT); MLX4_BUILD_PTYS2ETHTOOL_CONFIG(MLX4_1000BASE_KX, SPEED_1000, ETHTOOL_LINK_MODE_1000baseKX_Full_BIT); MLX4_BUILD_PTYS2ETHTOOL_CONFIG(MLX4_10GBASE_T, SPEED_10000, @@ -675,9 +675,9 @@ void __init mlx4_en_init_ptys2ethtool_map(void) MLX4_BUILD_PTYS2ETHTOOL_CONFIG(MLX4_10GBASE_KR, SPEED_10000, ETHTOOL_LINK_MODE_10000baseKR_Full_BIT); MLX4_BUILD_PTYS2ETHTOOL_CONFIG(MLX4_10GBASE_CR, SPEED_10000, - ETHTOOL_LINK_MODE_10000baseKR_Full_BIT); + ETHTOOL_LINK_MODE_10000baseCR_Full_BIT); MLX4_BUILD_PTYS2ETHTOOL_CONFIG(MLX4_10GBASE_SR, SPEED_10000, - ETHTOOL_LINK_MODE_10000baseKR_Full_BIT); + ETHTOOL_LINK_MODE_10000baseSR_Full_BIT); MLX4_BUILD_PTYS2ETHTOOL_CONFIG(MLX4_20GBASE_KR2, SPEED_20000, ETHTOOL_LINK_MODE_20000baseMLD2_Full_BIT, ETHTOOL_LINK_MODE_20000baseKR2_Full_BIT);