diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index 6b4a3d90c9f7f..6974090a7efac 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -2803,6 +2803,14 @@ static int mlx5e_modify_tirs_lro(struct mlx5e_priv *priv)
 		err = mlx5_core_modify_tir(mdev, priv->indir_tir[tt].tirn, in);
 		if (err)
 			goto free_in;
+
+		/* Verify inner tirs resources allocated */
+		if (!priv->inner_indir_tir[0].tirn)
+			continue;
+
+		err = mlx5_core_modify_tir(mdev, priv->inner_indir_tir[tt].tirn, in);
+		if (err)
+			goto free_in;
 	}
 
 	for (ix = 0; ix < priv->max_nch; ix++) {
@@ -4928,7 +4936,14 @@ static void mlx5e_build_nic_netdev(struct net_device *netdev)
 	netdev->hw_enc_features  |= NETIF_F_HW_VLAN_CTAG_TX;
 	netdev->hw_enc_features  |= NETIF_F_HW_VLAN_CTAG_RX;
 
+	/* Tunneled LRO is not supported in the driver, and the same RQs are
+	 * shared between inner and outer TIRs, so the driver can't disable LRO
+	 * for inner TIRs while having it enabled for outer TIRs. Due to this,
+	 * block LRO altogether if the firmware declares tunneled LRO support.
+	 */
 	if (!!MLX5_CAP_ETH(mdev, lro_cap) &&
+	    !MLX5_CAP_ETH(mdev, tunnel_lro_vxlan) &&
+	    !MLX5_CAP_ETH(mdev, tunnel_lro_gre) &&
 	    mlx5e_check_fragmented_striding_rq_cap(mdev))
 		netdev->vlan_features    |= NETIF_F_LRO;
 
diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h
index af8f4e2cf21d1..70a3664785f80 100644
--- a/include/linux/mlx5/mlx5_ifc.h
+++ b/include/linux/mlx5/mlx5_ifc.h
@@ -876,7 +876,8 @@ struct mlx5_ifc_per_protocol_networking_offload_caps_bits {
 	u8         scatter_fcs[0x1];
 	u8         enhanced_multi_pkt_send_wqe[0x1];
 	u8         tunnel_lso_const_out_ip_id[0x1];
-	u8         reserved_at_1c[0x2];
+	u8         tunnel_lro_gre[0x1];
+	u8         tunnel_lro_vxlan[0x1];
 	u8         tunnel_stateless_gre[0x1];
 	u8         tunnel_stateless_vxlan[0x1];