From ba500204ac33d34172856fc328141dea4840d05d Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sun, 27 Jun 2021 17:32:37 +0100 Subject: [PATCH] iio: dac: ad5624r: Fix incorrect handling of an optional regulator. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit 97683c851f9cdbd3ea55697cbe2dcb6af4287bbd ] The naming of the regulator is problematic. VCC is usually a supply voltage whereas these devices have a separate VREF pin. Secondly, the regulator core might have provided a stub regulator if a real regulator wasn't provided. That would in turn have failed to provide a voltage when queried. So reality was that there was no way to use the internal reference. In order to avoid breaking any dts out in the wild, make sure to fallback to the original vcc naming if vref is not available. Signed-off-by: Jonathan Cameron Reported-by: kernel test robot Acked-by: Nuno Sá Link: https://lore.kernel.org/r/20210627163244.1090296-9-jic23@kernel.org Signed-off-by: Sasha Levin --- drivers/iio/dac/ad5624r_spi.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) diff --git a/drivers/iio/dac/ad5624r_spi.c b/drivers/iio/dac/ad5624r_spi.c index 9bde869829121..530529feebb51 100644 --- a/drivers/iio/dac/ad5624r_spi.c +++ b/drivers/iio/dac/ad5624r_spi.c @@ -229,7 +229,7 @@ static int ad5624r_probe(struct spi_device *spi) if (!indio_dev) return -ENOMEM; st = iio_priv(indio_dev); - st->reg = devm_regulator_get(&spi->dev, "vcc"); + st->reg = devm_regulator_get_optional(&spi->dev, "vref"); if (!IS_ERR(st->reg)) { ret = regulator_enable(st->reg); if (ret) @@ -240,6 +240,22 @@ static int ad5624r_probe(struct spi_device *spi) goto error_disable_reg; voltage_uv = ret; + } else { + if (PTR_ERR(st->reg) != -ENODEV) + return PTR_ERR(st->reg); + /* Backwards compatibility. This naming is not correct */ + st->reg = devm_regulator_get_optional(&spi->dev, "vcc"); + if (!IS_ERR(st->reg)) { + ret = regulator_enable(st->reg); + if (ret) + return ret; + + ret = regulator_get_voltage(st->reg); + if (ret < 0) + goto error_disable_reg; + + voltage_uv = ret; + } } spi_set_drvdata(spi, indio_dev);