From bf745142cc0a3e1723f9207fb0c073c88464b7b4 Mon Sep 17 00:00:00 2001 From: Haibo Chen Date: Wed, 15 Jun 2022 19:31:58 +0800 Subject: [PATCH] iio: accel: mma8452: ignore the return value of reset operation On fxls8471, after set the reset bit, the device will reset immediately, will not give ACK. So ignore the return value of this reset operation, let the following code logic to check whether the reset operation works. Signed-off-by: Haibo Chen Fixes: ecabae713196 ("iio: mma8452: Initialise before activating") Reviewed-by: Hans de Goede Link: https://lore.kernel.org/r/1655292718-14287-1-git-send-email-haibo.chen@nxp.com Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/accel/mma8452.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c index 4156d216c640a..f4f835274d751 100644 --- a/drivers/iio/accel/mma8452.c +++ b/drivers/iio/accel/mma8452.c @@ -1510,10 +1510,14 @@ static int mma8452_reset(struct i2c_client *client) int i; int ret; - ret = i2c_smbus_write_byte_data(client, MMA8452_CTRL_REG2, + /* + * Find on fxls8471, after config reset bit, it reset immediately, + * and will not give ACK, so here do not check the return value. + * The following code will read the reset register, and check whether + * this reset works. + */ + i2c_smbus_write_byte_data(client, MMA8452_CTRL_REG2, MMA8452_CTRL_REG2_RST); - if (ret < 0) - return ret; for (i = 0; i < 10; i++) { usleep_range(100, 200);