From c938e65768e0a80e7ea24899795878072e79b152 Mon Sep 17 00:00:00 2001 From: David Jeffery Date: Thu, 15 Jul 2021 17:37:44 -0400 Subject: [PATCH] usb: ehci: Prevent missed ehci interrupts with edge-triggered MSI commit 0b60557230adfdeb8164e0b342ac9cd469a75759 upstream. When MSI is used by the ehci-hcd driver, it can cause lost interrupts which results in EHCI only continuing to work due to a polling fallback. But the reliance of polling drastically reduces performance of any I/O through EHCI. Interrupts are lost as the EHCI interrupt handler does not safely handle edge-triggered interrupts. It fails to ensure all interrupt status bits are cleared, which works with level-triggered interrupts but not the edge-triggered interrupts typical from using MSI. To fix this problem, check if the driver may have raced with the hardware setting additional interrupt status bits and clear status until it is in a stable state. Fixes: 306c54d0edb6 ("usb: hcd: Try MSI interrupts on PCI devices") Tested-by: Laurence Oberman Reviewed-by: Andy Shevchenko Acked-by: Alan Stern Signed-off-by: David Jeffery Link: https://lore.kernel.org/r/20210715213744.GA44506@redhat Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-hcd.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index b5db2b2d0901a..6793fd99c1cb4 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -703,7 +703,8 @@ EXPORT_SYMBOL_GPL(ehci_setup); static irqreturn_t ehci_irq (struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci (hcd); - u32 status, masked_status, pcd_status = 0, cmd; + u32 status, current_status, masked_status, pcd_status = 0; + u32 cmd; int bh; unsigned long flags; @@ -715,19 +716,22 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) */ spin_lock_irqsave(&ehci->lock, flags); - status = ehci_readl(ehci, &ehci->regs->status); + status = 0; + current_status = ehci_readl(ehci, &ehci->regs->status); +restart: /* e.g. cardbus physical eject */ - if (status == ~(u32) 0) { + if (current_status == ~(u32) 0) { ehci_dbg (ehci, "device removed\n"); goto dead; } + status |= current_status; /* * We don't use STS_FLR, but some controllers don't like it to * remain on, so mask it out along with the other status bits. */ - masked_status = status & (INTR_MASK | STS_FLR); + masked_status = current_status & (INTR_MASK | STS_FLR); /* Shared IRQ? */ if (!masked_status || unlikely(ehci->rh_state == EHCI_RH_HALTED)) { @@ -737,6 +741,12 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) /* clear (just) interrupts */ ehci_writel(ehci, masked_status, &ehci->regs->status); + + /* For edge interrupts, don't race with an interrupt bit being raised */ + current_status = ehci_readl(ehci, &ehci->regs->status); + if (current_status & INTR_MASK) + goto restart; + cmd = ehci_readl(ehci, &ehci->regs->command); bh = 0;