From c9d143a3d8aa7faecacd34d1c5ca903311b92996 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Thu, 24 Jun 2021 21:20:39 +0900 Subject: [PATCH] usb: renesas_usbhs: Fix superfluous irqs happen after usb_pkt_pop() commit 5719df243e118fb343725e8b2afb1637e1af1373 upstream. This driver has a potential issue which this driver is possible to cause superfluous irqs after usb_pkt_pop() is called. So, after the commit 3af32605289e ("usb: renesas_usbhs: fix error return code of usbhsf_pkt_handler()") had been applied, we could observe the following error happened when we used g_audio. renesas_usbhs e6590000.usb: irq_ready run_error 1 : -22 To fix the issue, disable the tx or rx interrupt in usb_pkt_pop(). Fixes: 2743e7f90dc0 ("usb: renesas_usbhs: fix the usb_pkt_pop()") Cc: # v4.4+ Signed-off-by: Yoshihiro Shimoda Link: https://lore.kernel.org/r/20210624122039.596528-1-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/renesas_usbhs/fifo.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c index b5e7991dc7d9e..a3c2b01ccf7b5 100644 --- a/drivers/usb/renesas_usbhs/fifo.c +++ b/drivers/usb/renesas_usbhs/fifo.c @@ -101,6 +101,8 @@ static struct dma_chan *usbhsf_dma_chan_get(struct usbhs_fifo *fifo, #define usbhsf_dma_map(p) __usbhsf_dma_map_ctrl(p, 1) #define usbhsf_dma_unmap(p) __usbhsf_dma_map_ctrl(p, 0) static int __usbhsf_dma_map_ctrl(struct usbhs_pkt *pkt, int map); +static void usbhsf_tx_irq_ctrl(struct usbhs_pipe *pipe, int enable); +static void usbhsf_rx_irq_ctrl(struct usbhs_pipe *pipe, int enable); struct usbhs_pkt *usbhs_pkt_pop(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt) { struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); @@ -123,6 +125,11 @@ struct usbhs_pkt *usbhs_pkt_pop(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt) if (chan) { dmaengine_terminate_all(chan); usbhsf_dma_unmap(pkt); + } else { + if (usbhs_pipe_is_dir_in(pipe)) + usbhsf_rx_irq_ctrl(pipe, 0); + else + usbhsf_tx_irq_ctrl(pipe, 0); } usbhs_pipe_clear_without_sequence(pipe, 0, 0);