From d8431e3fa7b39de0596d346d747b8b02b09620ee Mon Sep 17 00:00:00 2001 From: Oleksij Rempel Date: Fri, 6 Aug 2021 11:47:23 +0200 Subject: [PATCH] net: dsa: qca: ar9331: make proper initial port defaults [ Upstream commit 47fac45600aafc5939d9620055c3c46f7135d316 ] Make sure that all external port are actually isolated from each other, so no packets are leaked. Fixes: ec6698c272de ("net: dsa: add support for Atheros AR9331 built-in switch") Signed-off-by: Oleksij Rempel Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/dsa/qca/ar9331.c | 73 +++++++++++++++++++++++++++++++++++- 1 file changed, 72 insertions(+), 1 deletion(-) diff --git a/drivers/net/dsa/qca/ar9331.c b/drivers/net/dsa/qca/ar9331.c index 6686192e1883e..563d8a2790306 100644 --- a/drivers/net/dsa/qca/ar9331.c +++ b/drivers/net/dsa/qca/ar9331.c @@ -101,6 +101,23 @@ AR9331_SW_PORT_STATUS_RX_FLOW_EN | AR9331_SW_PORT_STATUS_TX_FLOW_EN | \ AR9331_SW_PORT_STATUS_SPEED_M) +#define AR9331_SW_REG_PORT_CTRL(_port) (0x104 + (_port) * 0x100) +#define AR9331_SW_PORT_CTRL_HEAD_EN BIT(11) +#define AR9331_SW_PORT_CTRL_PORT_STATE GENMASK(2, 0) +#define AR9331_SW_PORT_CTRL_PORT_STATE_DISABLED 0 +#define AR9331_SW_PORT_CTRL_PORT_STATE_BLOCKING 1 +#define AR9331_SW_PORT_CTRL_PORT_STATE_LISTENING 2 +#define AR9331_SW_PORT_CTRL_PORT_STATE_LEARNING 3 +#define AR9331_SW_PORT_CTRL_PORT_STATE_FORWARD 4 + +#define AR9331_SW_REG_PORT_VLAN(_port) (0x108 + (_port) * 0x100) +#define AR9331_SW_PORT_VLAN_8021Q_MODE GENMASK(31, 30) +#define AR9331_SW_8021Q_MODE_SECURE 3 +#define AR9331_SW_8021Q_MODE_CHECK 2 +#define AR9331_SW_8021Q_MODE_FALLBACK 1 +#define AR9331_SW_8021Q_MODE_NONE 0 +#define AR9331_SW_PORT_VLAN_PORT_VID_MEMBER GENMASK(25, 16) + /* MIB registers */ #define AR9331_MIB_COUNTER(x) (0x20000 + ((x) * 0x100)) @@ -371,12 +388,60 @@ static int ar9331_sw_mbus_init(struct ar9331_sw_priv *priv) return 0; } -static int ar9331_sw_setup(struct dsa_switch *ds) +static int ar9331_sw_setup_port(struct dsa_switch *ds, int port) { struct ar9331_sw_priv *priv = (struct ar9331_sw_priv *)ds->priv; struct regmap *regmap = priv->regmap; + u32 port_mask, port_ctrl, val; int ret; + /* Generate default port settings */ + port_ctrl = FIELD_PREP(AR9331_SW_PORT_CTRL_PORT_STATE, + AR9331_SW_PORT_CTRL_PORT_STATE_FORWARD); + + if (dsa_is_cpu_port(ds, port)) { + /* CPU port should be allowed to communicate with all user + * ports. + */ + port_mask = dsa_user_ports(ds); + /* Enable Atheros header on CPU port. This will allow us + * communicate with each port separately + */ + port_ctrl |= AR9331_SW_PORT_CTRL_HEAD_EN; + } else if (dsa_is_user_port(ds, port)) { + /* User ports should communicate only with the CPU port. + */ + port_mask = BIT(dsa_upstream_port(ds, port)); + } else { + /* Other ports do not need to communicate at all */ + port_mask = 0; + } + + val = FIELD_PREP(AR9331_SW_PORT_VLAN_8021Q_MODE, + AR9331_SW_8021Q_MODE_NONE) | + FIELD_PREP(AR9331_SW_PORT_VLAN_PORT_VID_MEMBER, port_mask); + + ret = regmap_write(regmap, AR9331_SW_REG_PORT_VLAN(port), val); + if (ret) + goto error; + + ret = regmap_write(regmap, AR9331_SW_REG_PORT_CTRL(port), port_ctrl); + if (ret) + goto error; + + return 0; +error: + dev_err(priv->dev, "%s: error: %i\n", __func__, ret); + + return ret; +} + +static int ar9331_sw_setup(struct dsa_switch *ds) +{ + struct ar9331_sw_priv *priv = (struct ar9331_sw_priv *)ds->priv; + struct regmap *regmap = priv->regmap; + int ret, i; + ret = ar9331_sw_reset(priv); if (ret) return ret; @@ -402,6 +467,12 @@ static int ar9331_sw_setup(struct dsa_switch *ds) if (ret) goto error; + for (i = 0; i < ds->num_ports; i++) { + ret = ar9331_sw_setup_port(ds, i); + if (ret) + goto error; + } + ds->configure_vlan_while_not_filtering = false; return 0;