diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h
index da94cab528dd4..0f2acbb966740 100644
--- a/arch/powerpc/include/asm/hw_irq.h
+++ b/arch/powerpc/include/asm/hw_irq.h
@@ -175,6 +175,42 @@ static inline bool arch_irqs_disabled(void)
 	return arch_irqs_disabled_flags(arch_local_save_flags());
 }
 
+static inline void set_pmi_irq_pending(void)
+{
+	/*
+	 * Invoked from PMU callback functions to set PMI bit in the paca.
+	 * This has to be called with irq's disabled (via hard_irq_disable()).
+	 */
+	if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG))
+		WARN_ON_ONCE(mfmsr() & MSR_EE);
+
+	get_paca()->irq_happened |= PACA_IRQ_PMI;
+}
+
+static inline void clear_pmi_irq_pending(void)
+{
+	/*
+	 * Invoked from PMU callback functions to clear the pending PMI bit
+	 * in the paca.
+	 */
+	if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG))
+		WARN_ON_ONCE(mfmsr() & MSR_EE);
+
+	get_paca()->irq_happened &= ~PACA_IRQ_PMI;
+}
+
+static inline bool pmi_irq_pending(void)
+{
+	/*
+	 * Invoked from PMU callback functions to check if there is a pending
+	 * PMI bit in the paca.
+	 */
+	if (get_paca()->irq_happened & PACA_IRQ_PMI)
+		return true;
+
+	return false;
+}
+
 #ifdef CONFIG_PPC_BOOK3S
 /*
  * To support disabling and enabling of irq with PMI, set of
@@ -368,6 +404,10 @@ static inline bool arch_irq_disabled_regs(struct pt_regs *regs)
 
 static inline void may_hard_irq_enable(void) { }
 
+static inline void clear_pmi_irq_pending(void) { }
+static inline void set_pmi_irq_pending(void) { }
+static inline bool pmi_irq_pending(void) { return false; }
+
 static inline void irq_soft_mask_regs_set_state(struct pt_regs *regs, unsigned long val)
 {
 }
diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c
index b5cac8ddcf5bc..bd34e062bd290 100644
--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -805,6 +805,19 @@ static void write_pmc(int idx, unsigned long val)
 	}
 }
 
+static int any_pmc_overflown(struct cpu_hw_events *cpuhw)
+{
+	int i, idx;
+
+	for (i = 0; i < cpuhw->n_events; i++) {
+		idx = cpuhw->event[i]->hw.idx;
+		if ((idx) && ((int)read_pmc(idx) < 0))
+			return idx;
+	}
+
+	return 0;
+}
+
 /* Called from sysrq_handle_showregs() */
 void perf_event_print_debug(void)
 {
@@ -1228,11 +1241,13 @@ static void power_pmu_disable(struct pmu *pmu)
 
 		/*
 		 * Set the 'freeze counters' bit, clear EBE/BHRBA/PMCC/PMAO/FC56
+		 * Also clear PMXE to disable PMI's getting triggered in some
+		 * corner cases during PMU disable.
 		 */
 		val  = mmcr0 = mfspr(SPRN_MMCR0);
 		val |= MMCR0_FC;
 		val &= ~(MMCR0_EBE | MMCR0_BHRBA | MMCR0_PMCC | MMCR0_PMAO |
-			 MMCR0_FC56);
+			 MMCR0_PMXE | MMCR0_FC56);
 		/* Set mmcr0 PMCCEXT for p10 */
 		if (ppmu->flags & PPMU_ARCH_31)
 			val |= MMCR0_PMCCEXT;
@@ -1246,6 +1261,23 @@ static void power_pmu_disable(struct pmu *pmu)
 		mb();
 		isync();
 
+		/*
+		 * Some corner cases could clear the PMU counter overflow
+		 * while a masked PMI is pending. One such case is when
+		 * a PMI happens during interrupt replay and perf counter
+		 * values are cleared by PMU callbacks before replay.
+		 *
+		 * If any PMC corresponding to the active PMU events are
+		 * overflown, disable the interrupt by clearing the paca
+		 * bit for PMI since we are disabling the PMU now.
+		 * Otherwise provide a warning if there is PMI pending, but
+		 * no counter is found overflown.
+		 */
+		if (any_pmc_overflown(cpuhw))
+			clear_pmi_irq_pending();
+		else
+			WARN_ON(pmi_irq_pending());
+
 		val = mmcra = cpuhw->mmcr.mmcra;
 
 		/*
@@ -1337,6 +1369,15 @@ static void power_pmu_enable(struct pmu *pmu)
 	 * (possibly updated for removal of events).
 	 */
 	if (!cpuhw->n_added) {
+		/*
+		 * If there is any active event with an overflown PMC
+		 * value, set back PACA_IRQ_PMI which would have been
+		 * cleared in power_pmu_disable().
+		 */
+		hard_irq_disable();
+		if (any_pmc_overflown(cpuhw))
+			set_pmi_irq_pending();
+
 		mtspr(SPRN_MMCRA, cpuhw->mmcr.mmcra & ~MMCRA_SAMPLE_ENABLE);
 		mtspr(SPRN_MMCR1, cpuhw->mmcr.mmcr1);
 		if (ppmu->flags & PPMU_ARCH_31)
@@ -2274,6 +2315,14 @@ static void __perf_event_interrupt(struct pt_regs *regs)
 				break;
 			}
 		}
+
+		/*
+		 * Clear PACA_IRQ_PMI in case it was set by
+		 * set_pmi_irq_pending() when PMU was enabled
+		 * after accounting for interrupts.
+		 */
+		clear_pmi_irq_pending();
+
 		if (!active)
 			/* reset non active counters that have overflowed */
 			write_pmc(i + 1, 0);
@@ -2293,6 +2342,13 @@ static void __perf_event_interrupt(struct pt_regs *regs)
 			}
 		}
 	}
+
+	/*
+	 * During system wide profling or while specific CPU is monitored for an
+	 * event, some corner cases could cause PMC to overflow in idle path. This
+	 * will trigger a PMI after waking up from idle. Since counter values are _not_
+	 * saved/restored in idle path, can lead to below "Can't find PMC" message.
+	 */
 	if (unlikely(!found) && !arch_irq_disabled_regs(regs))
 		printk_ratelimited(KERN_WARNING "Can't find PMC that caused IRQ\n");