Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with
or
.
Download ZIP
Fetching contributors…

Cannot retrieve contributors at this time

39 lines (29 sloc) 1.399 kB
#####################################################################
# Example configuration file for perfmon. This file is read by
# /etc/init.d/perfmon and used to construct the command line
# arguments to pass to @BINDIR@/perfmon.
# uncomment lines to enable options.
PERFMON_FLAGS=""
# send lots of debug to /var/log/messages
#PERFMON_FLAGS="$PERFMON_FLAGS --debug"
# change loop time from default of 5 minutes to 1 minute
#PERFMON_FLAGS="$PERFMON_FLAGS --interval=60"
# Tell perfmon to request "5 second averages" from XAPI. By default
# it requests "60 second averages" from XAPI. The only valid options
# are 5 or 60.
#PERFMON_FLAGS="$PERFMON_FLAGS --rrdstep=5"
#####################################################################
# Advanced
# run only 10 loops then exit
#PERFMON_FLAGS="$PERFMON_FLAGS --numloops=10"
# Re-read the perfmon configuration for the host and all VMs
# every 10 minutes, instead of the default of every 1/2 hour.
# This increases the slave to master network traffic.
#
# (Note: XenCenter also "pushes" config changes so this is only a
# failsafe!)
#PERFMON_FLAGS="$PERFMON_FLAGS --config_update_period=600"
# Change the dither on each loop period from the default of 5% to 10%.
# This is purely to prevent slaves becoming synchronised and
# making requests to the master at the same time.
#PERFMON_FLAGS="$PERFMON_FLAGS --interval_percent_dither=10"
Jump to Line
Something went wrong with that request. Please try again.