From b9dfc5656e6fb3df7044b3264f4f71f1866dd882 Mon Sep 17 00:00:00 2001 From: mkreisl Date: Sat, 17 Mar 2018 15:41:14 +0100 Subject: [PATCH] Pi3B+ support, verup and fixes: - firmware: pwm_sdm multi-write support See: https://www.raspberrypi.org/forums/viewtopic.php?f=29&t=136445 - firmware: Remove cmaservice as it doesn't work reliably - firmware: New mailbox fns for peripheral access See: raspberrypi/linux#2222 - firmware: image_encode and JPEG codec fixes See: raspberrypi/userland#435 - firmware: vc_image fixups See: raspberrypi/userland#433 - firmware: Support for independant display configuration - firmware: arm_dt: Fixup camera gpios if overrides are found in dtoverlay - firmware: mjpeg encoder: Add new thread to do the encoding - firmware: arm_dt: Suppress non-fatal errors See: #906 - firmware: dtoverlay: Create "/aliases" node when needed See: #906 - firmware: dtoverlay app: Keep overlay symbols private - firmware: dtoverlay app: Report unknown parameters in help - firmware: IL ISP: Remove DPCM10_8 compressed input - firmware: mmal_il: Add missing mappings for 8 bit Bayer encodings - firmware: IMX219 tuning: enable motion detection - firmware: IL camera: increase minimum resolution to 32x32 - firmware: audioplus: hdmi: Remove spamming logging message - firmware: arm_loader: Make program_usb_boot_mode more flexible - firmware: ov5647: Comment Y offset in mode 5 (2x2 binned 16:9) - firmware: Video encode: Add option to set number of droppable P frames See: https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=201882 - firmware: i2c_gpio: Preserve errors when asserts are suppressed - firmware: power: Refactor get/set_voltage API, add SDRAM voltage - firmware: Install interface/peer headers See: raspberrypi/userland#166 - firmware: gx_create_window error cleanup fix See: #930 bootcode: Insert delay between disconnect and reconnect for USB device booting - firmware: IL ISP: Fix the black level control to do sensible things - firmware: IL ISP fixes for JC - firmware: raspividyuv: Fix saving timestamps See: raspberrypi/userland#453 - firmware: tidy: Platform cull - firmware: Default to audio_pwm_mode=2 See: https://www.raspberrypi.org/forums/viewtopic.php?f=29&t=195178 - firmware: arm_loader: Distinguish multiple turbo users power: Used cached values for reads See: Hexxeh/rpi-firmware#165 - firmware: dtoverlay: Use SUDO_USER in -pre and -post scripts bootcode: Fix network booting on Pi1/Pi2 See: #935 - firmware: arm_loader: Fix power-related crashes around bootup See: Hexxeh/rpi-firmware#165 - firmware: imx219: Increase max frame rate at 640x480 to 200fps - firmware: vc_image: Add plumbing for side-by-side YUV420 format - firmware: arm_loader: Cache the non-limited voltage See: Hexxeh/rpi-firmware#165 - firmware: IL video_encode: Fix small memory leak - firmware: arm_loader: Add get_throttled mailbox call See: raspberrypi/linux#2367 - firmware: video_encode: Free conv and subsample pools on disabling port - firmware: camera: Set fixed sensor mode on all sensors - firmware: Remove intermediate use of RGB888 in converting I420 to BGR888 - firmware: camera: Remove video tone mapping curves - firmware: camera: AGC should not copy the tone map from VIDEO to STILLS - firmware: arm_dt: Fix up case of NUM_CAMERAS = -1 - firmware: dtoverlay: Also allow fragment- in overlays - firmware: i2c_gpio: Optimise and run clients faster - firmware: Rework the frequency/voltage scaling logic - firmware: Clamp SDRAM frequencies only when sdm audio is active See: Hexxeh/rpi-firmware#172 - firmware: arm_dt: Improve DTB location, upstream kernel support See: #943 - firmware: platform: Should limit sdram voltage when turbo is throttled - firmware: video_decode: Allow setting the output format twice - firmware: vmcs: Increase service limit for vcsm to 2 - firmware: arm_dt: Restore support for user-selected DTB file See: #943 - firmware clock: WIP: Avoid temporary high clock when switching PLL and divisor See: https://forum.kodi.tv/showthread.php?tid=298461&pid=2713270#pid2713270 - firmware: platform: Make sure boosted frequency uses boosted voltage - firmware: power: Add 10ms timeout for PMIC voltage control - firmware: platform: Reduce i2c-gpio clock speed back to 200KHz - firmware: ldconfig: Support Pi3+ and Pi0W sections - firmware: platform: Update firmware dt-blob for pi3+ - firmware: video_decode: Allow setting the resolution on the output port - firmware: arm_loader: Fall back to stored frequency for clocks platform doesn't have fixed values for See: #951 --- build/rpi/config_pkgver | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/build/rpi/config_pkgver b/build/rpi/config_pkgver index f36a89d..e8d3654 100644 --- a/build/rpi/config_pkgver +++ b/build/rpi/config_pkgver @@ -1 +1 @@ -config_deb_version=7 +config_deb_version=8