ADM5 Klipper Mod v00.03-beta #49
Replies: 9 comments 19 replies
-
So far so good! Installed and did an initial print. Thank you all for making this happen! |
Beta Was this translation helpful? Give feedback.
-
It's possible to print directly from Orca Slicer using this connection setting? |
Beta Was this translation helpful? Give feedback.
-
Thank you so much! Will be trying this out ASAP today! |
Beta Was this translation helpful? Give feedback.
-
Wrote a short post on Reddit to announce the start of public beta for this mod. |
Beta Was this translation helpful? Give feedback.
-
Thank you SO much for making this for all of us in this community! I would really like try the KlipperScreen approach, but I don't yet know how to install that variant. I could not locate a prebuilt file for that variant. I downloaded the source code as a Zip file, and opened the folder in VSCode, but I don't how to build it. Please bear in mind I'm brand new to Klipper. I would sure appreciate any kind advice. Thank you again for being so awesome! |
Beta Was this translation helpful? Give feedback.
-
I got both the normal variant and the Klipperscreen variant working! Thank you! The only struggle I've had so far is that I could not get connected to wifi even after trying all the options shown in the wifi docs page, with the exception of the final option by use of Klipperscreen. On the klipper_mod method, I'm pretty sure I did it right, but it would not connect (i.e. after reboot). On the SSH method, the commands seemed to work fine, but after reboot no wifi. Thanks again for making this! |
Beta Was this translation helpful? Give feedback.
-
Hello again! I'm not a novice at either code or 3D printing, however, I am a novice regarding Klipper, and barely know enough about GCode to be dangerous. I am trying to alter the Flashforge AD5M print profile in OrcaSlicer to be suitable for this Klipper mod. I have read and reread this portion in the docs, but don't understand what to do on the last part:
I am basing this on Flashforge's profile provided for printing the DIY enclosure. For the first portion, the profile seems to already specify "Klipper" as the GCode Flavor: For the last portion, am I supposed to remove all the GCodes and etc that are in the Start and End... ...and replace as shown like this? If not, then would someone be kind enough to explain if incorrect, and/or what else is needed? Thank you so much! |
Beta Was this translation helpful? Give feedback.
-
i downloaded the klipper screen version, its very good but I connected it to the wifi and whenever i try accessing moonraker or fluidd it says site cant be reached |
Beta Was this translation helpful? Give feedback.
-
I've been holding off installing this until I confirmed that my Voron was back up an running after some upgrades, and I just installed the 00.04 release. So far it's working great! I also hoped to make sure that Flashforge knows that I only bought this printer because this printer ran klipper, I saw their (maybe halfhearted?) release of the klipper firmware, and saw this repo. Just finished my first test print after upgrading, and it looks perfect. Great work! |
Beta Was this translation helpful? Give feedback.
-
I guess it's time to finally announce that this mod has reached "beta" status and the repository is opened to the public 🎉
Welcome to all that are new to this project!
And thank you to all that have already contributed to this project during the last weeks! It took a fair amount of work to get to this point but it was also a lot of fun! Special thank is due to @consp who has tremendously helped with the development, testing and cool features that are now part of this mod.
There is not much to say about the features of this Release, since all the information is in the Readme, other documentation, discussions and open issues.
Everyone is welcome to contribute to this open source project and join the discussions here on GitHub!
Beta Was this translation helpful? Give feedback.
All reactions