…4329.ko from the same kernel build you are using to /system/modules otherwise it will fail to load!
…s, fixed the GPIO mapping. Use the right GPIO to tell the BP it should turn on. The SGS BP Bootloader won't tell us that is has booted properly. We miss the magic value MODEM_MSG_SBL_DONE. So we wait some time an then continue booting the BP. The firmware is send from userspace in libsec-ril.so what is loaded by the rild. It reads the firmware from /dev/mtd/mtd5ro and passes it to the modem. It is tested with JPM modem from GT-I9000. Userspace won't notice that the radio interface is there until you lock the phone and unlock it. Looks like a little phone state polling problem.
…uild because of "},". fixed it.
…aking capacitive buttons work sensibly.
…g_galaxys_port into galaxys-port
After taking a picture, the focus is maintained. So if user change from camera mode to video mode after taking a picture very closely to object, focus in video mode is not normal. So move lens to default position when preview starts. But if latest focus mode is MACRO, the focus should be maintained as MACRO default after taking a picture. Change-Id: Ice86ffd9b5932635ba0b4861bc2168559aaafe76 Signed-off-by: kyoungho.yun <email@example.com>
Change-Id: I37b207c90d6e14e69135f70ec30bf5892a6544f6 Signed-off-by: kyoungho.yun <firstname.lastname@example.org>
Samsung's hardware engineers consider 42C the safest maximum temperature for restarting charging. Signed-off-by: Simon Wilson <email@example.com>
Samsung's hardware team provided new values for charge cut-off and recovery, which are 5C higher than previously, due to the relative location of the temperature probe and battery within the device. Signed-off-by: Simon Wilson <firstname.lastname@example.org>
In the event the modem is not responsive during boot, ramdump, or semaphore acquisition, we timeout and return an error to userspace, so the RIL can reset the modem. Signed-off-by: Brian Swetland <email@example.com>
The old code created a realtime workqueue, but did not use it. This could cause a reboot if the default workqueue was blocked for more than one second. Also, the old timeout was short enough to often trigger a watchdog reset when duming the kernel log in the fiq debugger. Change-Id: I556e6bb85dd9a166cab98270a4f1ba23a9f4069c Signed-off-by: Arve Hjønnevåg <firstname.lastname@example.org>