Permalink
Browse files

Code comments added with doc chanegs

  • Loading branch information...
1 parent cdcdc16 commit fc1c2efc2d868b40cee7dc4e656a282b54fb7e45 @sethuchandan sethuchandan committed Oct 12, 2012
@@ -95,7 +95,7 @@ Demo Application
#. Press any key on console. A user menu will be displayed
#. Key in ``e`` to enter echo mode. Type in any character from the key board and application echoes the key pressed. In order to get back to user menu, press ``Esc`` key.
#. Key in ``r`` to enter reconfiguration mode. Key in new baud rate value (select one of the values from 115200, 57600, 38400, 19200, 9600, 4800, 600) followed by CR (Enter) key. The UART will be reconfigured (XDE console will display the value entered). The terminal console should be reopened with the new selected baud rate. Press ``h`` to display user menu.
- #. Key in ``b`` in order to pipe data trough UART channels 1-7. Type in the Console widow and then press Ctrl+D to send the data through 7 channels and recive it for display. To send a file, select the ``File Send`` option in Console SW (Right click in Hercules) and select the file. Then press CTRL+D from console to send file through channels 1-7 and receive it. Timing information is also displayed. Hardware setup for Pipe option should be as shown in the diagram, loop all the Uart channels(like Channel 7 Shown in the figure) except channel 0. If the connection to any of the channel is disconnected you will not see data received back and messge will be displayed on the terminal thaty the pipe is broken.
+ #. Key in ``b`` in order to pipe data trough UART channels 1-7. Type in the Console widow and then press Ctrl+D to send the data through 7 channels and recive it for display. To send a file, select the ``File Send`` option in Console SW (Right click in Hercules) and select the file. Then press CTRL+D from console to send file through channels 1-7 and receive it. Timing information is also displayed. Hardware setup for Pipe option should be as shown in the diagram, loop all the Uart channels(like Channel 7 Shown in the figure) except channel 0. If the connection to any of the channel is disconnected you will not see data received back and a message is displayed on the terminal saying that Muart pipe is broken.However, the timing information is not accurate for very small transfer sizes(characters less than 8).
#. Key in ``h`` in order to display user menu. This help is displayed any time during execution by pressing ``Esc`` key followed by ``h``
.. figure:: images/help_menu.png
Oops, something went wrong.

0 comments on commit fc1c2ef

Please sign in to comment.