Skip to content
Permalink
master
Go to file
 
 
Cannot retrieve contributors at this time
561 lines (475 sloc) 19.4 KB
# Openswan master makefile
# Copyright (C) 1998-2002 Henry Spencer.
# Copyright (C) 2003-2014 Xelerance Corporation
#
# This program is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by the
# Free Software Foundation; either version 2 of the License, or (at your
# option) any later version. See <http://www.fsf.org/copyleft/gpl.txt>.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
# for more details.
#
OPENSWANSRCDIR?=$(shell pwd)
export OPENSWANSRCDIR
TERMCAP=
export TERMCAP
include ${OPENSWANSRCDIR}/Makefile.inc
-include ${OPENSWANSRCDIR}/Makefile.vendor
srcdir?=$(shell pwd)
# dummy default rule
def:
@echo "Please read the README for detailed build instructions including how"
@echo "to enable NAT-T support for your kernel, if desired"
@echo
@echo "Commonly used build commands:"
@echo
@echo "When using KLIPS:"
@echo " make KERNELSRC=/usr/src/linux-2.6.36 module minstall programs install"
@echo
@echo "When using KLIPS with OCF:"
@echo " make KERNELSRC=/usr/src/linux-2.6.36-ocf/ MODULE_DEF_INCLUDE=$${OPENSWANSRCDIR}/packaging/ocf/config-all.hmodules module minstall programs install"
@echo
@echo "When using NETKEY:"
@echo " make programs install"
@echo
@echo "When called in openwrt/packaging/openswan/Makefile to build kmod-openswan"
@echo " make MODULE_DEFCONFIG=$${OPENSWANSRCDIR}/packaging/openwrt/defconfig MODULE_DEF_INCLUDE=$${OPENSWANSRCDIR}/packaging/openwrt/config-all.h module"
@echo
@echo
include ${OPENSWANSRCDIR}/Makefile.top
# kernel details
# what variant of our patches should we use, and where is it
KERNELREL=$(shell ${KVSHORTUTIL} ${KERNELSRC}/Makefile)
# directories visited by all recursion
# declaration for make's benefit
.PHONY: def insert kpatch patches _patches _patches2.4 \
klipsdefaults programs install clean distclean \
ogo oldgo menugo xgo \
omod menumod xmod \
pcf ocf mcf xcf rcf nopromptgo \
precheck verset confcheck kernel \
module module24 module26 kinstall minstall minstall24 minstall26 \
moduleclean mod24clean module24clean mod26clean module26clean \
backup unpatch uninstall install_file_list \
snapready relready ready buildready devready uml check taroldinstall \
umluserland
kpatch: unapplypatch applypatch klipsdefaults
npatch: unapplynpatch applynpatch
sarefpatch: unapplysarefpatch applysarefpatch
unapplypatch:
@echo "info: making unapplypatch in `pwd` and KERNELSRC=\"${KERNELSRC}\";"
-@if [ -f ${KERNELSRC}/openswan.patch ]; then \
echo Undoing previous patches; \
cat ${KERNELSRC}/openswan.patch | (cd ${KERNELSRC} && patch -p1 -R --force -E -z .preipsec --reverse --ignore-whitespace ); \
fi
applypatch:
@echo "info: Now performing forward patches in `pwd`";
${MAKE} kernelpatch${KERNELREL} | tee ${KERNELSRC}/openswan.patch | (cd ${KERNELSRC} && patch -p1 -b -z .preipsec --forward --ignore-whitespace )
unapplynpatch:
@echo "info: making unapplynpatch (note the second N) in `pwd`";
-@if [ -f ${KERNELSRC}/natt.patch ]; then \
echo Undoing previous NAT patches; \
cat ${KERNELSRC}/natt.patch | (cd ${KERNELSRC} && patch -p1 -R --force -E -z .preipsec --reverse --ignore-whitespace ); \
fi
applynpatch:
@echo "info: Now performing forward NAT patches in `pwd`";
${MAKE} nattpatch${KERNELREL} | tee ${KERNELSRC}/natt.patch | (cd ${KERNELSRC} && patch -p1 -b -z .preipsec --forward --ignore-whitespace )
unapplysarefpatch:
@echo "info: making unapplysarefpatch in `pwd`";
-@if [ -f ${KERNELSRC}/saref.patch ]; then \
echo Undoing previous saref patches; \
cat ${KERNELSRC}/saref.patch | (cd ${KERNELSRC} && patch -p1 -R --force -E -z .preng --reverse --ignore-whitespace ); \
fi
applysarefpatch:
@echo "info: Now performing SAref patches in `pwd`";
${MAKE} sarefpatch${KERNELREL} | tee ${KERNELSRC}/klipsng.patch | (cd ${KERNELSRC} && patch -p1 -b -z .preng --forward --ignore-whitespace )
# patch kernel
PATCHER=packaging/utils/patcher
patches:
@echo \"make patches\" is obsolete. See \"make kpatch\".
exit 1
_patches:
echo "===============" >>out.kpatch
echo "`date` `cd $(KERNELSRC) ; pwd`" >>out.kpatch
$(MAKE) __patches$(KERNELREL) >>out.kpatch
# Linux-2.4.0 version
PATCHES22=klips/patches2.2
__patches2.3 __patches2.4:
@$(PATCHER) -v -c $(KERNELSRC) Documentation/Configure.help \
'CONFIG_KLIPS' $(PATCHES)/Documentation/Configure.help.fs2_2.patch
@$(PATCHER) -v $(KERNELSRC) net/Config.in \
'CONFIG_KLIPS' $(PATCHES)/net/Config.in.fs2_4.patch
@$(PATCHER) -v $(KERNELSRC) net/Makefile \
'CONFIG_KLIPS' $(PATCHES)/net/Makefile.fs2_4.patch
@$(PATCHER) -v $(KERNELSRC) net/ipv4/af_inet.c \
'CONFIG_KLIPS' $(PATCHES)/net/ipv4/af_inet.c.fs2_4.patch
@$(PATCHER) -v $(KERNELSRC) net/ipv4/udp.c \
'CONFIG_KLIPS' $(PATCHES)/net/ipv4/udp.c.fs2_4.patch
@$(PATCHER) -v $(KERNELSRC) include/net/sock.h \
'CONFIG_KLIPS' $(PATCHES)/include/net/sock.h.fs2_4.patch
# Removed patches, will unpatch automatically.
@$(PATCHER) -v $(KERNELSRC) include/linux/proc_fs.h
@$(PATCHER) -v $(KERNELSRC) net/core/dev.c
@$(PATCHER) -v $(KERNELSRC) net/ipv4/protocol.c
@$(PATCHER) -v $(KERNELSRC) drivers/net/Space.c
@$(PATCHER) -v $(KERNELSRC) include/linux/netlink.h
@$(PATCHER) -v $(KERNELSRC) net/netlink/af_netlink.c
@$(PATCHER) -v $(KERNELSRC) net/netlink/netlink_dev.c
@$(PATCHER) -v $(KERNELSRC) drivers/isdn/isdn_net.c
klipsdefaults:
@KERNELDEFCONFIG=$(KERNELSRC)/arch/$(ARCH)/defconfig ; \
KERNELCONFIG=$(KCFILE) ; \
if ! egrep -q 'CONFIG_KLIPS' $$KERNELDEFCONFIG ; \
then \
set -x ; \
cp -a $$KERNELDEFCONFIG $$KERNELDEFCONFIG.orig ; \
chmod u+w $$KERNELDEFCONFIG ; \
cat $$KERNELDEFCONFIG $(KERNELKLIPS)/defconfig \
>$$KERNELDEFCONFIG.tmp ; \
rm -f $$KERNELDEFCONFIG ; \
cp -a $$KERNELDEFCONFIG.tmp $$KERNELDEFCONFIG ; \
rm -f $$KERNELDEFCONFIG.tmp ; \
fi ; \
if ! egrep -q 'CONFIG_KLIPS' $$KERNELCONFIG ; \
then \
set -x ; \
cp -a $$KERNELCONFIG $$KERNELCONFIG.orig ; \
chmod u+w $$KERNELCONFIG ; \
cat $$KERNELCONFIG $(KERNELKLIPS)/defconfig \
>$$KERNELCONFIG.tmp ; \
rm -f $$KERNELCONFIG ; \
cp -a $$KERNELCONFIG.tmp $$KERNELCONFIG ; \
rm -f $$KERNELCONFIG.tmp ; \
fi
# programs
ifeq ($(strip $(OBJDIR)),.) # If OBJDIR is OPENSWANSRCDIR (ie dot) then the simple case:
programs install clean::
@for d in $(SUBDIRS) ; \
do \
(cd $$d && $(MAKE) srcdir=${OPENSWANSRCDIR}/$$d/ OPENSWANSRCDIR=${OPENSWANSRCDIR} $@ ) || exit 1; \
done;
else
ABSOBJDIR:=$(shell mkdir -p ${OBJDIR}; cd ${OBJDIR} && pwd)
OBJDIRTOP=${ABSOBJDIR}
export OBJDIRTOP
programs install clean:: ${OBJDIR}/Makefile
@echo OBJDIR: ${OBJDIR}
(cd ${ABSOBJDIR} && OBJDIRTOP=${ABSOBJDIR} OBJDIR=${ABSOBJDIR} ${MAKE} $@ )
${OBJDIR}/Makefile: ${srcdir}/Makefile packaging/utils/makeshadowdir
@echo Setting up for OBJDIR=${OBJDIR}
@packaging/utils/makeshadowdir `(cd ${srcdir}; echo $$PWD)` ${OBJDIR} "${SUBDIRS}"
endif
checkprograms:: programs
@for d in $(SUBDIRS) ; \
do \
(cd $$d && $(MAKE) srcdir=${OPENSWANSRCDIR}/$$d/ OPENSWANSRCDIR=${OPENSWANSRCDIR} $@ ) || exit 1; \
done;
checkv199install:
@if [ "${LIBDIR}" != "${LIBEXECDIR}" ] && [ -f ${LIBDIR}/pluto ]; \
then \
echo WARNING: Old version of FreeS/WAN Openswan 1.x installed. ;\
echo WARNING: moving ${LIBDIR} to ${LIBDIR}.v1 ;\
mv ${LIBDIR} ${LIBDIR}.v1 ;\
fi
install:: checkv199install
install::
mkdir -p ${LIBEXECDIR}
if [ -n '${VENDOR}' ]; then echo '${VENDOR} ' >${LIBDIR}/vendor.txt; fi
clean::
rm -rf $(RPMTMPDIR) $(RPMDEST)
rm -f out.*build out.*install # but leave out.kpatch
# proxies for major kernel make operations
# do-everything entries
KINSERT_PRE=precheck verset insert
PRE=precheck verset kpatch
POST=confcheck programs kernel install
MPOST=confcheck programs module install
#ogo: $(PRE) pcf $(POST)
#oldgo: $(PRE) ocf $(POST)
#nopromptgo: $(PRE) rcf $(POST)
#menugo: $(PRE) mcf $(POST)
#xgo: $(PRE) xcf $(POST)
ogo: obsolete_target
oldgo: obsolete_target
nopromptgo: obsolete_target
menugo: obsolete_target
xgo: obsolete_target
obsolete_target:
@echo "The targets ogo, oldgo, menugo, nopromptgo and xgo are obsolete. Please read INSTALL"
# preliminaries
precheck:
@if test ! -d $(KERNELSRC) -a ! -L $(KERNELSRC) ; \
then \
echo '*** cannot find directory "$(KERNELSRC)"!!' ; \
echo '*** may be necessary to add symlink to kernel source' ; \
exit 1 ; \
fi
@if ! cd $(KERNELSRC) ; \
then \
echo '*** cannot "cd $(KERNELSRC)"!!' ; \
echo '*** may be necessary to add symlink to kernel source' ; \
exit 1 ; \
fi
@if test ! -f $(KCFILE) ; \
then \
echo '*** cannot find "$(KCFILE)"!!' ; \
echo '*** perhaps kernel has never been configured?' ; \
echo '*** please do that first; the results are necessary.' ; \
exit 1 ; \
fi
@if test ! -f $(VERFILE) ; \
then \
echo '*** cannot find "$(VERFILE)"!!' ; \
echo '*** perhaps kernel has never been compiled?' ; \
echo '*** please do that first; the results are necessary.' ; \
exit 1 ; \
fi
Makefile: Makefile.ver
# configuring (exit statuses disregarded, something fishy here sometimes)
xcf:
-cd $(KERNELSRC) ; $(MAKE) $(KERNMAKEOPTS) xconfig
mcf:
-cd $(KERNELSRC) ; $(MAKE) $(KERNMAKEOPTS) menuconfig
pcf:
-cd $(KERNELSRC) ; $(MAKE) $(KERNMAKEOPTS) config
ocf:
-cd $(KERNELSRC) ; $(MAKE) $(KERNMAKEOPTS) oldconfig
rcf:
cd $(KERNELSRC) ; $(MAKE) $(KERNMAKEOPTS) ${NONINTCONFIG} </dev/null
cd $(KERNELSRC) ; $(MAKE) $(KERNMAKEOPTS) dep >/dev/null
kclean:
-cd $(KERNELSRC) ; $(MAKE) $(KERNMAKEOPTS) clean
confcheck:
@if test ! -f $(KCFILE) ; \
then echo '*** no kernel configuration file written!!' ; exit 1 ; \
fi
@if ! egrep -q '^CONFIG_KLIPS=[my]' $(KCFILE) ; \
then echo '*** IPsec not in kernel config ($(KCFILE))!!' ; exit 1 ; \
fi
@if ! egrep -q 'CONFIG_KLIPS[ ]+1' $(ACFILE) && \
! egrep -q 'CONFIG_KLIPS_MODULE[ ]+1' $(ACFILE) ; \
then echo '*** IPsec in kernel config ($(KCFILE)),' ; \
echo '*** but not in config header file ($(ACFILE))!!' ; \
exit 1 ; \
fi
@if egrep -q '^CONFIG_KLIPS=m' $(KCFILE) && \
! egrep -q '^CONFIG_MODULES=y' $(KCFILE) ; \
then echo '*** IPsec configured as module in kernel with no module support!!' ; exit 1 ; \
fi
@if ! egrep -q 'CONFIG_KLIPS_AH[ ]+1' $(ACFILE) && \
! egrep -q 'CONFIG_KLIPS_ESP[ ]+1' $(ACFILE) ; \
then echo '*** IPsec configuration must include AH or ESP!!' ; exit 1 ; \
fi
# kernel building, with error checks
kernel:
rm -f out.kbuild out.kinstall
# undocumented kernel folklore: clean BEFORE dep.
# we run make dep seperately, because there is no point in running ERRCHECK
# on the make dep output.
# see LKML thread "clean before or after dep?"
( cd $(KERNELSRC) ; $(MAKE) $(KERNMAKEOPTS) $(KERNCLEAN) $(KERNDEP) )
( cd $(KERNELSRC) ; $(MAKE) $(KERNMAKEOPTS) $(KERNEL) ) 2>&1 | tee out.kbuild
@if egrep -q '^CONFIG_MODULES=y' $(KCFILE) ; \
then set -x ; \
( cd $(KERNELSRC) ; \
$(MAKE) $(KERNMAKEOPTS) modules 2>&1 ) | tee -a out.kbuild ; \
fi
${ERRCHECK} out.kbuild
# module-only building, with error checks
ifneq ($(strip $(MODBUILDDIR)),)
${MODBUILDDIR}/Makefile : ${OPENSWANSRCDIR}/packaging/makefiles/module.make
mkdir -p ${MODBUILDDIR}
cp ${OPENSWANSRCDIR}/packaging/makefiles/module.make ${MODBUILDDIR}/Makefile
echo "# " >> ${MODBUILDDIR}/Makefile
echo "# Local Variables: " >> ${MODBUILDDIR}/Makefile
echo "# compile-command: \"${MAKE} OPENSWANSRCDIR=${OPENSWANSRCDIR} ARCH=${ARCH} TOPDIR=${KERNELSRC} ${MODULE_FLAGS} MODULE_DEF_INCLUDE=${MODULE_DEF_INCLUDE} MODULE_DEFCONFIG=${MODULE_DEFCONFIG} -f Makefile ipsec.o\"" >> ${MODBUILDDIR}/Makefile
echo "# End: " >> ${MODBUILDDIR}/Makefile
module:
@if [ -f ${KERNELSRC}/README.openswan-2 ] ; then \
echo "WARNING: Kernel source ${KERNELSRC} has already been patched with openswan-2, out of tree build might fail!"; \
fi;
@if [ -f ${KERNELSRC}/README.freeswan ] ; then \
echo "ERROR: Kernel source ${KERNELSRC} has already been patched with freeswan, out of tree build will fail!"; \
fi;
${MAKE} module26
modclean moduleclean:
@if [ -f ${KERNELSRC}/Rules.make ] ; then \
echo "Cleaning module for a 2.4 kernel"; ${MAKE} module24clean ; \
else echo "Cleaning module for a 2.6 kernel"; ${MAKE} module26clean; \
fi;
#autoodetect 2.4 and 2.6
module_install: minstall
minstall:
${MAKE} minstall26;
else
module:
echo 'Building in place is no longer supported. Please set MODBUILDDIR='
exit 1
endif
# module-only building, with error checks
ifneq ($(strip $(MOD26BUILDDIR)),)
${MOD26BUILDDIR}/Makefile : ${OPENSWANSRCDIR}/packaging/makefiles/module26.make
mkdir -p ${MOD26BUILDDIR}
echo ln -s -f ${OPENSWANSRCDIR}/linux/net/ipsec/des/*.S ${MOD26BUILDDIR}
(rm -f ${MOD26BUILDDIR}/des; mkdir -p ${MOD26BUILDDIR}/des && cd ${MOD26BUILDDIR}/des && ln -s -f ${OPENSWANSRCDIR}/linux/net/ipsec/des/* . && ln -s -f Makefile.fs2_6 Makefile)
(rm -f ${MOD26BUILDDIR}/aes; mkdir -p ${MOD26BUILDDIR}/aes && cd ${MOD26BUILDDIR}/aes && ln -s -f ${OPENSWANSRCDIR}/linux/net/ipsec/aes/* . && ln -s -f Makefile.fs2_6 Makefile)
mkdir -p ${MOD26BUILDDIR}/aes
cp ${OPENSWANSRCDIR}/packaging/makefiles/module26.make ${MOD26BUILDDIR}/Makefile
echo "# " >> ${MOD26BUILDDIR}/Makefile
echo "# Local Variables: " >> ${MOD26BUILDDIR}/Makefile
echo "# compile-command: \"${MAKE} -C ${OPENSWANSRCDIR} ARCH=${ARCH} KERNELSRC=${KERNELSRC} MOD26BUILDDIR=${MOD26BUILDDIR} module26\"" >> ${MOD26BUILDDIR}/Makefile
echo "# End: " >> ${MOD26BUILDDIR}/Makefile
ln -s -f ${OPENSWANSRCDIR}/linux/net/ipsec/match*.S ${MOD26BUILDDIR}
module26:
@if [ -f ${KERNELSRC}/Rules.make ] ; then \ echo "Warning: Building for a 2.6 kernel in what looks like a 2.4 tree"; \
fi ; \
${MAKE} ${MOD26BUILDDIR}/Makefile
${MAKE} -C ${KERNELSRC} ${KERNELBUILDMFLAGS} BUILDDIR=${MOD26BUILDDIR} SUBDIRS=${MOD26BUILDDIR} MODULE_DEF_INCLUDE=${MODULE_DEF_INCLUDE} MODULE_DEFCONFIG=${MODULE_DEFCONFIG} MODULE_EXTRA_INCLUDE=${MODULE_EXTRA_INCLUDE} ARCH=${ARCH} V=${V} modules
@echo
@echo '========================================================='
@echo
@echo 'KLIPS26 module built successfully. '
@echo ipsec.ko is in ${MOD26BUILDDIR}
@echo
@(cd ${MOD26BUILDDIR}; ls -l ipsec.ko)
@(cd ${MOD26BUILDDIR}; size ipsec.ko)
@echo
@echo 'use make minstall as root to install it'
@echo
@echo '========================================================='
@echo
mod26clean module26clean:
rm -rf ${MOD26BUILDDIR}
# module-only install, with error checks
minstall26:
( OSMODLIB=`${MAKE} -C $(KERNELSRC) -p help | ( sed -n -e '/^MODLIB/p' -e '/^MODLIB/q' ; cat > /dev/null ) | sed -e 's/^MODLIB[ :=]*\([^;]*\).*/\1/'` ; \
if [ -z "$$OSMODLIB" ] ; then \
OSMODLIB=`${MAKE} -C $(KERNELSRC) -n -p modules_install | ( sed -n -e '/^MODLIB/p' -e '/^MODLIB/q' ; cat > /dev/null ) | sed -e 's/^MODLIB[ :=]*\([^;]*\).*/\1/'` ; \
fi ; \
if [ -z "$$OSMODLIB" ] ; then \
echo "No known place to install module. Aborting." ; \
exit 93 ; \
fi ; \
set -x ; \
mkdir -p $$OSMODLIB/kernel/$(OSMOD_DESTDIR) ; \
cp $(MOD26BUILDDIR)/ipsec.ko $$OSMODLIB/kernel/$(OSMOD_DESTDIR) ; \
if [ -f /sbin/depmod ] ; then /sbin/depmod -a ; fi; \
if [ -n "$(OSMOD_DESTDIR)" ] ; then \
mkdir -p $$OSMODLIB/kernel/$(OSMOD_DESTDIR) ; \
if [ -f $$OSMODLIB/kernel/ipsec.ko -a -f $$OSMODLIB/kernel/$(OSMOD_DESTDIR)/ipsec.ko ] ; then \
echo "WARNING: two ipsec.ko modules found in $$OSMODLIB/kernel:" ; \
ls -l $$OSMODLIB/kernel/ipsec.ko $$OSMODLIB/kernel/$(OSMOD_DESTDIR)/ipsec.ko ; \
exit 1; \
fi ; \
fi ; \
set -x ) ;
else
module26:
echo 'Building in place is no longer supported. Please set MOD26BUILDDIR='
exit 1
endif
# kernel install, with error checks
kinstall:
rm -f out.kinstall
>out.kinstall
# undocumented kernel folklore: modules_install must precede install (observed on RHL8.0)
@if egrep -q '^CONFIG_MODULES=y' $(KCFILE) ; \
then set -x ; \
( cd $(KERNELSRC) ; \
$(MAKE) $(KERNMAKEOPTS) modules_install 2>&1 ) | tee -a out.kinstall ; \
fi
( cd $(KERNELSRC) ; $(MAKE) $(KERNMAKEOPTS) install ) 2>&1 | tee -a out.kinstall
${ERRCHECK} out.kinstall
kernelpatch3.9 kernelpatch2.6 kernelpatch:
packaging/utils/kernelpatch 2.6
kernelpatch2.4:
packaging/utils/kernelpatch 2.4
kernelpatch2.2:
packaging/utils/kernelpatch 2.2
kernelpatch2.0:
packaging/utils/kernelpatch 2.0
nattpatch:
if [ -f ${KERNELSRC}/Makefile ]; then \
${MAKE} nattpatch${KERNELREL}; \
else echo "Cannot determine Linux kernel version. Perhaps you need to set KERNELSRC? (eg: export KERNELSRC=/usr/src/linux-`uname -r`/)"; exit 1; \
fi;
sarefpatch3.9 sarefpatch2.6:
packaging/utils/sarefpatch 2.6
nattpatch2.6:
packaging/utils/nattpatch 2.6
nattpatch2.4:
packaging/utils/nattpatch 2.4
nattpatch2.2:
packaging/utils/nattpatch 2.2
nattupdate:
(cd UMLPOOL && diff -u plain26/net/ipv4/udp.c.orig plain26/net/ipv4/udp.c; exit 0) >nat-t/net/ipv4/udp.c.os2_6.patch
# take all the patches out of the kernel
# (Note, a couple of files are modified by non-patch means; they are
# included in "make backup".)
unpatch:
@echo \"make unpatch\" is obsolete. See make unapplypatch.
exit 1
_unpatch:
for f in `find $(KERNELSRC)/. -name '*.preipsec' -print` ; \
do \
echo "restoring $$f:" ; \
dir=`dirname $$f` ; \
core=`basename $$f .preipsec` ; \
cd $$dir ; \
mv -f $$core.preipsec $$core ; \
rm -f $$core.wipsec $$core.ipsecmd5 ; \
done
# at the moment there is no difference between snapshot and release build
snapready: buildready
relready: buildready
ready: devready
# set up for build
buildready:
rm -f dtrmakefile cvs.datemark
# obsolete cd doc ; $(MAKE) -s
rpm:
@echo To build an rpm, use: rpmbuild -ba packaging/XXX/openswan.spec
@echo where XXX is your rpm based vendor
rpmbuild -bs packaging/centos5/bluerose.spec
ipkg_strip:
@echo "Minimizing size for ipkg binaries..."
@cd $(DESTDIR)$(INC_USRLOCAL)/lib/ipsec && \
for f in *; do (if file $$f | grep ARM > /dev/null; then ( $(STRIP) --strip-unneeded $$f); fi); done
@rm -r $(DESTDIR)$(INC_USRLOCAL)/man
@rm -f $(DESTDIR)$(INC_RCDEFAULT)/*.old
@rm -f $(DESTDIR)$(INC_USRLOCAL)/lib/ipsec/*.old
@rm -f $(DESTDIR)$(INC_USRLOCAL)/libexec/ipsec/*.old
@rm -f $(DESTDIR)$(INC_USRLOCAL)/sbin/*.old
@rm -f $(DESTDIR)$(INC_USRLOCAL)/share/doc/openswan/*
ipkg_module:
@echo "Moving ipsec.o into temporary location..."
KV=$(shell ${KVUTIL} ${KERNELSRC}/Makefile) && \
mkdir -p $(OPENSWANSRCDIR)/packaging/ipkg/kernel-module/lib/modules/$$KV/net/ipsec
KV=$(shell ${KVUTIL} ${KERNELSRC}/Makefile) && \
cp ${OPENSWANSRCDIR}/modobj*/ipsec.[k]o $(OPENSWANSRCDIR)/packaging/ipkg/kernel-module/lib/modules/$$KV/net/ipsec/
KV=$(shell ${KVUTIL} ${KERNELSRC}/Makefile)
ipkg_clean:
rm -rf $(OPENSWANSRCDIR)/packaging/ipkg/kernel-module/
rm -rf $(OPENSWANSRCDIR)/packaging/ipkg/ipkg/
rm -f $(OPENSWANSRCDIR)/packaging/ipkg/control-openswan
rm -f $(OPENSWANSRCDIR)/packaging/ipkg/control-openswan-module
ipkg: programs install ipkg_strip ipkg_module
@echo "Generating ipkg...";
DESTDIR=${DESTDIR} OPENSWANSRCDIR=${OPENSWANSRCDIR} ARCH=${ARCH} IPSECVERSION=${IPSECVERSION} ./packaging/ipkg/generate-ipkg
tarpkg:
@echo "Generating tar.gz package to install"
@rm -rf /var/tmp/openswan-${USER}
@make DESTDIR=/var/tmp/openswan-${USER} programs install
@rm /var/tmp/openswan-${USER}/etc/ipsec.conf
@(cd /var/tmp/openswan-${USER} && tar czf - . ) >openswan${VENDOR}-${IPSECVERSION}.tgz
@ls -l openswan${VENDOR}-${IPSECVERSION}.tgz
@rm -rf /var/tmp/openswan-${USER}
env:
@env | sed -e "s/'/'\\\\''/g" -e "s/\([^=]*\)=\(.*\)/\1='\2'/"
#
# A target that does nothing intesting is sometimes interesting...
war:
@echo "Not Love?"
You can’t perform that action at this time.