WiringPi / WiringOP libary for the Orange Pi Zero with 26 pin GPIO header
Switch branches/tags
Nothing to show
Clone or download
Fetching latest commit…
Cannot retrieve the latest commit at this time.

README.md

WiringOP-Zero

WiringPi / WiringOP libary for the Orange Pi Zero with 26 pin GPIO header

This is a modified WiringPi for specially OrangePi Zero.

GPIO is fully working, i2c not tested yet!

SPI is tested on Armbian with legacy kernel:
    The SPI channel 0 is used for SPI Flash and channel 1 is available
    for use in GPIO pins...
    > bin2fex /boot/script.bin script.fex
    > nano script.fex
      Add following lines:
          [spi1_para]
          spi_used = 1
          spi_cs_bitmap = 1
          spi_cs0 = port:PA13<2><1><default><default>
          spi_sclk = port:PA14<2><default><default><default>
          spi_mosi = port:PA15<2><default><default><default>
          spi_miso = port:PA16<2><default><default><default>
          
          [spi_devices]
          spi_dev_num = 2

          [spi_board1]
          modalias = "spidev"
          max_speed_hz = 33000000
          bus_num = 1
          chip_select = 0
          mode = 0
          full_duplex = 1
          manual_cs = 0

    > fex2bin script.fex bin/orangepizero.bin
    > reboot -i

Download

git clone https://github.com/xpertsavenue/WiringOP-Zero.git

Installation

cd WiringOP-Zero
chmod +x ./build
sudo ./build

Test

christian@orangepizero:~/WiringOP-Zero$ gpio readall
 +-----+-----+----------+------+--Orange Pi Zero--+---+------+---------+-----+--+
 | H2+ | wPi |   Name   | Mode | V | Physical | V | Mode | Name     | wPi | H2+ |
 +-----+-----+----------+------+---+----++----+---+------+----------+-----+-----+
 |     |     |     3.3v |      |   |  1 || 2  |   |      | 5v       |     |     |
 |  12 |   8 |    SDA.0 | ALT5 | 0 |  3 || 4  |   |      | 5V       |     |     |
 |  11 |   9 |    SCL.0 | ALT5 | 0 |  5 || 6  |   |      | 0v       |     |     |
 |   6 |   7 |   GPIO.7 | ALT3 | 0 |  7 || 8  | 0 | ALT5 | TxD3     | 15  | 198 |
 |     |     |       0v |      |   |  9 || 10 | 0 | ALT5 | RxD3     | 16  | 199 |
 |   1 |   0 |     RxD2 | ALT5 | 0 | 11 || 12 | 0 | ALT3 | GPIO.1   | 1   | 7   |
 |   0 |   2 |     TxD2 | ALT5 | 0 | 13 || 14 |   |      | 0v       |     |     |
 |   3 |   3 |     CTS2 | ALT3 | 0 | 15 || 16 | 0 | ALT4 | GPIO.4   | 4   | 19  |
 |     |     |     3.3v |      |   | 17 || 18 | 0 | ALT4 | GPIO.5   | 5   | 18  |
 |  15 |  12 |     MOSI | ALT5 | 0 | 19 || 20 |   |      | 0v       |     |     |
 |  16 |  13 |     MISO | ALT5 | 0 | 21 || 22 | 0 | ALT3 | RTS2     | 6   | 2   |
 |  14 |  14 |     SCLK | ALT5 | 0 | 23 || 24 | 0 | ALT5 | CE0      | 10  | 13  |
 |     |     |       0v |      |   | 25 || 26 | 0 | ALT3 | GPIO.11  | 11  | 10  |
 +-----+-----+----------+------+---+---LEDs---+---+------+----------+-----+-----+
 |  17 |  30 | STAT-LED |  OUT | 0 | 27 || 28 |   |      | PWR-LED  |     |     |
 +-----+-----+----------+------+---+-----+----+---+------+----------+-----+-----+
 | H2+ | wPi |   Name   | Mode | V | Physical | V | Mode | Name     | wPi | H2+ |
 +-----+-----+----------+------+--Orange Pi Zero--+---+------+---------+-----+--+

To control red LED on the board run for example this:

gpio write 30 1 

and to turn off this

gpio write 30 0 

Thanks to zhaolei, who created the base libary for this one!