Skip to content


Switch branches/tags

Name already in use

A tag already exists with the provided branch name. Many Git commands accept both tag and branch names, so creating this branch may cause unexpected behavior. Are you sure you want to create this branch?
This branch is 5 commits ahead, 34 commits behind nix-community:master.

Latest commit


Git stats


Failed to load latest commit information.
Latest commit message
Commit time

A simple kernel module that allows one to call ACPI methods by writing the method name followed by its arguments to /proc/acpi/call.

This module is to be considered a proof-of-concept, and has been superseded by projects like bbswitch. It allows you to tamper with your system and should be used with caution.

Want to use acpi_call via a graphical interface? Click here


echo '<call>' | sudo tee /proc/acpi/call

You can then retrieve the result of the call by checking your dmesg or:

sudo cat /proc/acpi/call

An example to turn off the discrete graphics card in a dual graphics environment (like NVIDIA Optimus):

# turn off discrete graphics card
echo '\_SB.PCI0.PEG1.GFX0.DOFF' > /proc/acpi/call
# turn it back on
echo '\_SB.PCI0.PEG1.GFX0.DON' > /proc/acpi/call

These work on my ASUS K52J notebook, but may not work for you. For a list of methods to try, see or try running the provided script examples/

It SHOULD be ok to test all of the methods, until you see a drop in battery drain rate (grep rate /proc/acpi/battery/BAT0/state), however it comes with NO WARRANTY - it may hang your computer/laptop, fail to work, etc.

You can pass parameters to acpi_call by writing them after the method, separated by single space. Currently, you can pass the following parameter types:

  • ACPI_INTEGER - by writing NNN or 0xNNN, where NNN is an integer/hex
  • ACPI_STRING - by enclosing the string in quotes: "hello, world"
  • ACPI_BUFFER - by writing bXXXX, where XXXX is a hex string without spaces, or by writing { b1, b2, b3, b4 }, where b1-4 are integers

The status after a call can be read back from /proc/acpi/call:

  • 'not called' - nothing to report
  • 'Error: ' - the call failed
  • '0xNN' - the call succeeded, and returned an integer
  • '"..."' - the call succeeded, and returned a string
  • '{0xNN, ...}' - the call succeeded, and returned a buffer
  • '[...]' - the call succeeded, and returned a package which may contain the above types (integer, string and buffer) and other package types

Graphic interface

Found this too difficult? Try to use these programs provided by Marco Dalla Libera and do it via graphic interface:

Copyright (c) 2010: Michal Kottman

This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.


A linux kernel module that enables calls to ACPI methods through /proc/acpi/call. Now with support for Integer, String and Buffer parameters.






No packages published


  • C 89.4%
  • Perl 6.2%
  • Shell 2.6%
  • Makefile 1.8%