Update Slic3r settings

Library/Application Support/Slic3r/print/Zargony Normal.ini

@@ -1,4 +1,6 @@
-# generated by Slic3r 1.3.0-dev on 2017-08-17 21:04:55
+# generated by Slic3r 1.3.0-dev on 2017-12-06 22:30:57
+adaptive_slicing = 1
+adaptive_slicing_quality = 75%
 avoid_crossing_perimeters = 0
 bottom_infill_pattern = rectilinear
 bottom_solid_layers = 3
@@ -24,7 +26,7 @@ fill_gaps = 1
 fill_pattern = stars
 first_layer_acceleration = 0
 first_layer_extrusion_width = 0
-first_layer_height = 0.2
+first_layer_height = 0.3
 first_layer_speed = 30
 gap_fill_speed = 30
 gcode_comments = 0
@@ -39,6 +41,7 @@ infill_speed = 70
 interface_shells = 0
 interior_brim_width = 0
 layer_height = 0.2
+match_horizontal_surfaces = 0
 max_print_speed = 80
 max_volumetric_speed = 0
 min_skirt_length = 20
@@ -51,14 +54,14 @@ perimeter_acceleration = 0
 perimeter_extruder = 1
 perimeter_extrusion_width = 0
 perimeter_speed = 60
-perimeters = 3
+perimeters = 2
 post_process = 
 print_settings_id = 
 raft_layers = 0
 regions_overlap = 0
 resolution = 0
 seam_position = aligned
-shortcuts = fill_density;fill_pattern;bottom_solid_layers;first_layer_height;layer_height;perimeters;top_solid_layers;brim_width;infill_speed;perimeter_speed;support_material;support_material_threshold
+shortcuts = xy_size_compensation;fill_density;fill_pattern;bottom_solid_layers;first_layer_height;layer_height;perimeters;top_solid_layers;brim_width;interior_brim_width;infill_speed;perimeter_speed;support_material;support_material_threshold
 skirt_distance = 3
 skirt_height = 1
 skirts = 1
@@ -67,7 +70,7 @@ solid_infill_below_area = 30
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0
-solid_infill_speed = 50
+solid_infill_speed = 85%
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
@@ -78,6 +81,7 @@ support_material_enforce_layers = 0
 support_material_extruder = 1
 support_material_extrusion_width = 0
 support_material_interface_extruder = 1
+support_material_interface_extrusion_width = 0
 support_material_interface_layers = 3
 support_material_interface_spacing = 0
 support_material_interface_speed = 100%
@@ -88,7 +92,7 @@ support_material_threshold = 60%
 thin_walls = 1
 top_infill_extrusion_width = 0
 top_infill_pattern = rectilinear
-top_solid_infill_speed = 50%
+top_solid_infill_speed = 70%
 top_solid_layers = 3
 travel_speed = 160
 xy_size_compensation = 0

Library/Application Support/Slic3r/printer/Zargony HyperCube.ini

@@ -1,29 +1,31 @@
-# generated by Slic3r 1.3.0-dev on 2017-07-18 11:52:50
+# generated by Slic3r 1.3.0-dev on 2017-12-06 22:32:35
 bed_shape = 0x0,300x0,300x190,0x190
 before_layer_gcode = 
 between_objects_gcode = 
-end_gcode = ;M144 ; switch bed to standby\n;M104 S0 ; extruder heater off\n;M140 S0 ; heated bed heater off\nM106 S0 ; turn off fan\nG91 ; relative positioning\nM83 ; relative extruder moves\nG1 E-5 ; retract filament\nG1 Z5 F5000 ; move z up a bit\nT-1 ; deselect tool (switches all tools to standby)\nG1 X-300 Y200 F5000 ; move head out of the way of the print\nM84 ; disable motors\nG90 ; absolute positioning\n
+end_gcode = ;M144 ; switch bed to standby\n;M104 S0 ; extruder heater off\n;M140 S0 ; heated bed heater off\nM106 S0 ; turn off fan\nG91 ; relative positioning\nM83 ; relative extruder moves\nG1 E-5 F2500  ; retract filament a bit\nG1 Z5 F5000 ; move z up a bit\nT-1 ; deselect tool (switches all tools to standby)\nG1 X-300 Y200 F5000 ; move head out of the way of the print\nM84 ; disable motors\nG90 ; absolute positioning\n
 extruder_offset = 0x0
 gcode_flavor = reprap
 has_heatbed = 1
 host_type = duet
 layer_gcode = 
+max_layer_height = 0.3
+min_layer_height = 0.1
 nozzle_diameter = 0.4
 octoprint_apikey = 
 pressure_advance = 0
 print_host = hypercube
 printer_notes = 
 printer_settings_id = 
 retract_before_travel = 5
-retract_layer_change = 1
+retract_layer_change = 0
 retract_length = 4.5
 retract_length_toolchange = 10
 retract_lift = 0
 retract_lift_above = 0
 retract_lift_below = 0
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
-retract_speed = 150
+retract_speed = 40
 serial_port = 
 serial_speed = 250000
 start_gcode = G21 ; metric values\nG90 ; absolute positioning\nM82 ; absolute extruder moves\nM107 ; start with the fan off\nG28 ; home all axes\nG92 E0 ; zero the extruded length\nG1 F200 E5 ; extrude 5mm of feed stock\nG92 E0 ; zero the extruded length again\n

Library/Application Support/Slic3r/printer/Zargony Kossel.ini

@@ -1,17 +1,19 @@
-# generated by Slic3r 1.3.0-dev on 2017-05-30 20:53:33
+# generated by Slic3r 1.3.0-dev on 2017-12-06 22:19:00
 bed_shape = 79.5618x8.36228,78.2518x16.6329,76.0845x24.7214,73.0836x32.5389,69.282x40,64.7214x47.0228,59.4516x53.5304,53.5304x59.4516,47.0228x64.7214,40x69.282,32.5389x73.0836,24.7214x76.0845,16.6329x78.2518,8.36228x79.5618,0x80,-8.36228x79.5618,-16.6329x78.2518,-24.7214x76.0845,-32.5389x73.0836,-40x69.282,-47.0228x64.7214,-53.5304x59.4516,-59.4516x53.5304,-64.7214x47.0228,-69.282x40,-73.0836x32.5389,-76.0845x24.7214,-78.2518x16.6329,-79.5618x8.36228,-80x0,-79.5618x-8.36228,-78.2518x-16.6329,-76.0845x-24.7214,-73.0836x-32.5389,-69.282x-40,-64.7214x-47.0228,-59.4516x-53.5304,-53.5304x-59.4516,-47.0228x-64.7214,-40x-69.282,-32.5389x-73.0836,-24.7214x-76.0845,-16.6329x-78.2518,-8.36228x-79.5618,0x-80,8.36228x-79.5618,16.6329x-78.2518,24.7214x-76.0845,32.5389x-73.0836,40x-69.282,47.0228x-64.7214,53.5304x-59.4516,59.4516x-53.5304,64.7214x-47.0228,69.282x-40,73.0836x-32.5389,76.0845x-24.7214,78.2518x-16.6329,79.5618x-8.36228,80x0
 before_layer_gcode = 
 between_objects_gcode = 
 end_gcode = ;M144 ; switch bed to standby\n;M104 S0 ; extruder heater off\n;M140 S0 ; heated bed heater off\nM106 S0 ; turn off fan\nG91 ; relative positioning\nM83 ; relative extruder moves\nG1 E-5 ; retract filament\nT-1 ; deselect tool (switches all tools to standby)\nG28 ; home all axes\nM84 ; disable motors\nG90 ; absolute positioning\n
 extruder_offset = 0x0
 gcode_flavor = reprap
 has_heatbed = 1
+host_type = duet
 layer_gcode = 
-notes = 
+max_layer_height = 0.3
+min_layer_height = 0.1
 nozzle_diameter = 0.4
 octoprint_apikey = 
-octoprint_host = 
 pressure_advance = 0
+print_host = kossel
 printer_notes = ""
 printer_settings_id = 
 retract_before_travel = 2