Skip to content


Subversion checkout URL

You can clone with
Download ZIP
Fetching contributors…
Cannot retrieve contributors at this time
374 lines (266 sloc) 11.4 KB


Simple component for performing diagnostic tests in real-world PHP applications.

It currently ships with the following Checks: Callback, ClassExists, CpuPerformance, DirReadable, DirWritable, DiskFree, ExtensionLoaded, PhpVersion, SteamWrapperExists.

Using diagnostics with Symfony 2


Using diagnostics with Zend Framework 2

  1. Install the ZFTool module.
  2. Enable diagnostic tests in your application config.php.
  3. In your console type php public/index.php diag to run diagnostics.

Using diagnostics in plain PHP

  1. Add ZendDiagnostics component to your application
  2. If you are not using Composer, use include "autoload_register.php";
  3. Create an instance of ZendDiagnostics\Runner
  4. Add tests using Runner::addTest()
  5. Optionally add a reporter to display progress using Runner::addReporter()
  6. Run diagnostics Runner::run()

For example:

// run_diagnostics.php

use ZendDiagnostics\Check;
use ZendDiagnostics\Runner\Runner;
use ZendDiagnostics\Runner\Reporter\BasicConsole;
use ZendDiagnostics\Check\DiskFree;

include 'autoload_register.php';

// Create Runner instance
$runner = new Runner();

// Add checks
$runner->addCheck(new Check\DirWritable('/tmp'));
$runner->addCheck(new Check\DiskFree('/tmp', 100000000));

// Add console reporter
$runner->addReporter(new BasicConsole(80, true));

// Run all checks

You can now run the file in your console (command line):

> php run_diagnostics.php
Starting diagnostics:


OK (2 diagnostic tests)

Using Result Collection

The Runner will always return a Result\Collection (even without any attached Reporter). This collection contains results for all tests and failure counters.

Simple example:

$runner = new Runner();
$checkSpace = new Check\DiskFree('/tmp', 100000000);
$checkTemp  = new Check\DirWritable('/tmp');

// Run all checks
$results = $runner->run();

echo "Number of successful tests: " . $results->getSuccessCount() . "\n";
echo "Number of failed tests:     " . $results->getFailureCount() . "\n";

if ($results[$checkSpace] instanceof \ZendDiagnostics\Result\FailureInterface) {
    echo "Oooops! We're running out of space on temp.\n";

if ($results[$checkTemp] instanceof \ZendDiagnostics\Result\FailureInterface) {
    echo "It seems that /tmp is not writable - this is a serious problem!\n";


A single diagnostic Check performs one particular test on the application or environment.

It must return a Result which implements one of the following result interfaces:

  • Success - in case the check ran through without any issue.
  • Warning - in case there might be something wrong.
  • Failure - when the test failed and an intervention is required.

Each test Result can additionally return:

  • result message via getMessage(). It can be used to describe the context of the result.
  • result data via getData(). This can be used for providing detailed information on the cause of particular result, which might be useful for debugging problems.

One can define additional result interfaces, i.e. denoting severity levels (i.e. critical, alert, notice) or appropriate actions (i.e. missing, incomplete). However, it is recommended to extend the primary set of Success, Warning, Failure interfaces for compatibility with other applications and libraries.

Writing custom Checks

A Check class has to implement Check and provide the following methods:

interface CheckInterface
     * @return ResultInterface
    public function check();

     * Return a label describing this test instance.
     * @return string
    public function getLabel();

The main check() method is responsible for doing the actual check and is expected to return a Result. It is recommended to use the built-in result classes for compatibility with Runner and other checks.

Here is an example trivial class, that will check if PHP default timezone is set to UTC.

namespace MyApp\Diagnostics\Check;

use ZendDiagnostics\Check\CheckInterface;
use ZendDiagnostics\Result\Success;
use ZendDiagnostics\Check\Failure;

class TimezoneSetToUTC implements CheckInterface
    public function check()
        $tz = date_default_timezone_get();

        if ($tz == 'UTC') {
            return new Success('Default timezone is UTC');
        } else {
            return new Failure('Default timezone is not UTC! It is actually ' . $tz);

    public function getLabel()
        return 'Check if PHP default timezone is set to UTC';

Writing custom Reporters

A Reporter is a class implementing ReporterInterface.

interface ReporterInterface
    public function onStart(ArrayObject $checks, $runnerConfig);
    public function onBeforeRun(Check $check);
    public function onAfterRun(Check $check, Result $result);
    public function onStop(ResultsCollection $results);
    public function onFinish(ResultsCollection $results);

A Runner invokes above methods while running diagnostics in the following order:

  • onStart - right after calling Runner::run()
  • onBeforeRun - before each individual Check.
  • onAfterRun - after each individual check has finished running.
  • onFinish - after Runner has finished its job.
  • onStop - in case Runner has been interrupted:
    • when the Reporter has returned false from onAfterRun method
    • or when runner is configured with setBreakOnFailure(true) and one of the Checks fails.

Some Reporter methods can be used to interrupt the operation of a Runner:

  • onBeforeRun(Check $check) - in case this method returns false, that particular Check will be omitted.
  • onAfterRun(Check $check, Result($result)) - in case this method returns false, the Runner will abort checking.

All other return values are ignored.

ZendDiagnostics ships with a simple Console reporter - it can serve as a good example on how to write your own Reporters.

Built-in diagnostics checks

ZendDiagnostics provides several "just add water" checks you can use straight away.

The following built-in tests are currently available:


Run a function (callback) and use return value as a result

use ZendDiagnostics\Check\Callback;
use ZendDiagnostics\Result\Success;
use ZendDiagnostics\Result\Failure;

$checkDbFile = new Callback(function(){
    $path = __DIR__ . '/data/db.sqlite';
    if(is_file($path) && is_readable($path) && filesize($path)) {
        return new Success('Db file is ok');
    } else {
        return new Failure('There is something wrong with the db file');

Note: The callback must return either a boolean (true for success, false for failure) or a valid instance of ResultInterface. All other objects will result in an exception and scalars (i.e. a string) will be interpreted as warnings.


Check if a class (or an array of classes) exist. For example:

use ZendDiagnostics\Check\ClassExists;

$checkLuaClass    = new ClassExists('Lua');
$checkRbacClasses = new ClassExists(array(


Benchmark CPU performance and return failure if it is below the given ratio. The baseline for performance calculation is the speed of Amazon EC2 Micro Instance (Q1 2013). You can specify the expected performance for the test, where a ratio of 1.0 (one) means at least the speed of EC2 Micro Instance. A ratio of 2 would mean "at least double the performance of EC2 Micro Instance" and a fraction of 0.5 means "at least half the performance of Micro Instance".

The following check will test if current server has at least half the CPU power of EC2 Micro Instance:

use ZendDiagnostics\Check\CpuPerformance;

$checkMinCPUSpeed = new CpuPerformance(0.5); // at least 50% of EC2 micro instance


Check if a given path (or array of paths) points to a directory and it is readable.

use ZendDiagnostics\Check\DirReadable;

$checkPublic = new DirReadable('public/');
$checkAssets = new DirReadable(array(
    __DIR__ . '/assets/img',
    __DIR__ . '/assets/js'


Check if a given path (or array of paths) points to a directory and if it can be written to.

use ZendDiagnostics\Check\DirWritable;

$checkTemporary = new DirWritable('/tmp');
$checkAssets    = new DirWritable(array(
    __DIR__ . '/assets/customImages',
    __DIR__ . '/assets/customJs',
    __DIR__ . '/assets/uploads',


Check if there is enough remaining free disk space.

The first parameter is the minimum disk space, which can be supplied as integer (in bytes, i.e. 1024) or as a string with a multiplier (IEC, SI or Jedec, i.e. "150MB"). The second parameter is the path to check - on *NIX systems it is an ordinary path (i.e. /home), on Windows systems it is a drive letter (i.e. "C:").

use ZendDiagnostics\Check\DiskFree;

$tempHasAtLeast100Megs  = new DiskFree('100MB', '/tmp');
$homeHasAtLeast1TB      = new DiskFree('1TiB',  '/home');
$dataHasAtLeast900Bytes = new DiskFree(900, __DIR__ . '/data/');


Check if a PHP extension (or an array of extensions) is currently loaded.

use ZendDiagnostics\Check\ExtensionLoaded;

$checkMbstring    = new ExtensionLoaded('mbstring');
$checkCompression = new ExtensionLoaded(array(


Check if current PHP version matches the given requirement. The test accepts 2 parameters - baseline version and optional comparison operator.

use ZendDiagnostics\Check\PhpVersion;

$require545orNewer  = new PhpVersion('5.4.5');
$rejectBetaVersions = new PhpVersion('5.5.0', '<');


Check if a given stream wrapper (or an array of wrappers) is available. For example:

use ZendDiagnostics\Check\StreamWrapperExists;

$checkOGGStream   = new StreamWrapperExists('ogg');
$checkCompression = new StreamWrapperExists(array(
Jump to Line
Something went wrong with that request. Please try again.