New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Please revert #127 and re-enable IPv6 #1822

Open
unquietwiki opened this Issue Sep 26, 2018 · 2 comments

Comments

Projects
None yet
2 participants
@unquietwiki

unquietwiki commented Sep 26, 2018

I'd like to have #127 reversed for version 6.0. Per this thread; the Samba4 bug causing problems being fixed 4 years ago; BIND & NSD support going back years; and how I was able to use IPv6 with Windows AD 10 years ago; it should be fine to reactivate again. The web interface for DNS entries also will need to allow 45-char addresses.

Thanks!

@unquietwiki

This comment has been minimized.

Show comment
Hide comment
@unquietwiki

unquietwiki Sep 27, 2018

Some additional info on this...

*. Revoking the ipv6 disabling statements in sysctl.conf does allow the system to get IPv6 addresses.
*. The system does appear to register at least its own SLAAC/DHCPv6-assigned address to DNS.
*. Editing /etc/cloud/cloud.cfg.d/50-curtin-networking.cfg & /etc/netplan/50-cloud-init.yaml appear to persist static IPv4 & IPv6 addresses. Side note, that seems to make the need for entries in /etc/networking/interfaces redundant. Only looked into this after I had some trouble re-networking my IPv4 setup, and had my old address still in there.

unquietwiki commented Sep 27, 2018

Some additional info on this...

*. Revoking the ipv6 disabling statements in sysctl.conf does allow the system to get IPv6 addresses.
*. The system does appear to register at least its own SLAAC/DHCPv6-assigned address to DNS.
*. Editing /etc/cloud/cloud.cfg.d/50-curtin-networking.cfg & /etc/netplan/50-cloud-init.yaml appear to persist static IPv4 & IPv6 addresses. Side note, that seems to make the need for entries in /etc/networking/interfaces redundant. Only looked into this after I had some trouble re-networking my IPv4 setup, and had my old address still in there.

@Neustradamus

This comment has been minimized.

Show comment
Hide comment
@Neustradamus

Neustradamus Sep 28, 2018

It will be nice to have an option to enable ipv4 and/or ipv6 in panel.

Neustradamus commented Sep 28, 2018

It will be nice to have an option to enable ipv4 and/or ipv6 in panel.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment