diff --git a/drivers/input/Kconfig.ft5336 b/drivers/input/Kconfig.ft5336
index 4b8eea98e148919..f817616a1d6024c 100644
--- a/drivers/input/Kconfig.ft5336
+++ b/drivers/input/Kconfig.ft5336
@@ -3,14 +3,15 @@
 # SPDX-License-Identifier: Apache-2.0
 
 menuconfig INPUT_FT5336
-	bool "FT5XX6/FT6XX6 capacitive touch panel driver"
+	bool "FT3267/FT5XX6/FT6XX6 capacitive touch panel driver"
 	default y
 	depends on DT_HAS_FOCALTECH_FT5336_ENABLED
 	select I2C
 	help
 	  Enable driver for multiple Focaltech capacitive touch panel
 	  controllers. This driver should support FT5x06, FT5606, FT5x16,
-	  FT6x06, Ft6x36, FT5x06i, FT5336, FT3316, FT5436i, FT5336i and FT5x46.
+	  FT6x06, Ft6x36, FT5x06i, FT5336, FT3316, FT5436i, FT3267,
+	  FT5336i and FT5x46.
 
 if INPUT_FT5336
 
diff --git a/drivers/input/input_ft5336.c b/drivers/input/input_ft5336.c
index 6b05b9cf19481ee..6a6a7fdc9a891cb 100644
--- a/drivers/input/input_ft5336.c
+++ b/drivers/input/input_ft5336.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2020 NXP
+ * Copyright (c) 2020,2023 NXP
  * Copyright (c) 2020 Mark Olsson <mark@markolsson.se>
  * Copyright (c) 2020 Teslabs Engineering S.L.
  *
@@ -39,6 +39,7 @@ LOG_MODULE_REGISTER(ft5336, CONFIG_INPUT_LOG_LEVEL);
 struct ft5336_config {
 	/** I2C bus. */
 	struct i2c_dt_spec bus;
+	struct gpio_dt_spec reset_gpio;
 #ifdef CONFIG_INPUT_FT5336_INTERRUPT
 	/** Interrupt GPIO information. */
 	struct gpio_dt_spec int_gpio;
@@ -140,6 +141,7 @@ static int ft5336_init(const struct device *dev)
 {
 	const struct ft5336_config *config = dev->config;
 	struct ft5336_data *data = dev->data;
+	int r;
 
 	if (!device_is_ready(config->bus.bus)) {
 		LOG_ERR("I2C controller device not ready");
@@ -150,8 +152,23 @@ static int ft5336_init(const struct device *dev)
 
 	k_work_init(&data->work, ft5336_work_handler);
 
+	if (config->reset_gpio.port != NULL) {
+		/* Enable reset GPIO, and pull down */
+		r = gpio_pin_configure_dt(&config->reset_gpio, GPIO_OUTPUT_INACTIVE);
+		if (r < 0) {
+			LOG_ERR("Could not enable reset GPIO");
+			return r;
+		}
+		/* Delay 5 ms to reset controller */
+		k_sleep(K_MSEC(5));
+		/* Pull reset pin high to complete reset sequence */
+		r = gpio_pin_set_dt(&config->reset_gpio, 1);
+		if (r < 0) {
+			return r;
+		}
+	}
+
 #ifdef CONFIG_INPUT_FT5336_INTERRUPT
-	int r;
 
 	if (!device_is_ready(config->int_gpio.port)) {
 		LOG_ERR("Interrupt GPIO controller device not ready");
@@ -189,6 +206,7 @@ static int ft5336_init(const struct device *dev)
 #define FT5336_INIT(index)                                                     \
 	static const struct ft5336_config ft5336_config_##index = {	       \
 		.bus = I2C_DT_SPEC_INST_GET(index),			       \
+		.reset_gpio = GPIO_DT_SPEC_INST_GET_OR(index, reset_gpios, {0}),  \
 		IF_ENABLED(CONFIG_INPUT_FT5336_INTERRUPT,		       \
 		(.int_gpio = GPIO_DT_SPEC_INST_GET(index, int_gpios),))	       \
 	};								       \
diff --git a/dts/bindings/input/focaltech,ft5336.yaml b/dts/bindings/input/focaltech,ft5336.yaml
index 3898d182152363a..d58ba18df8096bb 100644
--- a/dts/bindings/input/focaltech,ft5336.yaml
+++ b/dts/bindings/input/focaltech,ft5336.yaml
@@ -1,7 +1,7 @@
-# Copyright (c) 2020 NXP
+# Copyright (c) 2020,2023 NXP
 # SPDX-License-Identifier: Apache-2.0
 
-description: FT5XX6/FT6XX6 capacitive touch panels
+description: FT3267/FT5XX6/FT6XX6 capacitive touch panels
 
 compatible: "focaltech,ft5336"
 
@@ -10,3 +10,11 @@ include: i2c-device.yaml
 properties:
   int-gpios:
     type: phandle-array
+    description: |
+      Interrupt GPIO. Used by the controller to signal touch data is
+      available. Active low.
+  reset-gpios:
+    type: phandle-array
+    description: |
+      Reset GPIO. Used to reset the controller during initialization, and
+      to wake it from hibernation mode. Active low.