Skip to content
Permalink
Branch: master
Commits on Jul 14, 2019
  1. tests: board_shell: enable ADC shell

    henrikbrixandersen authored and nashif committed Jul 3, 2019
    Enable the ADC shell in the board_shell test.
    
    Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Commits on Jul 9, 2019
  1. boards: match specified jlink swd speed when using pyocd runner

    henrikbrixandersen authored and MaureenHelm committed Jun 30, 2019
    Match the speed speficied for all boards using the jlink runner when
    using the pyocd runner on the same board.
    
    Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Commits on Jul 2, 2019
  1. boards: twr_ke18f: document watchdog support

    henrikbrixandersen authored and MaureenHelm committed Jun 20, 2019
    Add watchdog support to the documentation for the NXP TWR-KE18F
    development board.
    
    Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
  2. soc: arm: nxp: ke1xf: add watchdog support

    henrikbrixandersen authored and MaureenHelm committed May 20, 2019
    Add watchdog (WDOG32) support to the NXP Kinetis KE1xF SoC series.
    
    Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
  3. drivers: watchdog: mcux_wdog32: add driver for the NXP Kinetis WDOG32

    henrikbrixandersen authored and MaureenHelm committed May 20, 2019
    Add driver shim for the NXP Kinetis WDOG32 module.
    
    Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Commits on Jul 1, 2019
  1. samples: sensors: fxos8700: add support for twr-ke18f board

    henrikbrixandersen authored and MaureenHelm committed Jun 30, 2019
    Add support for the FXOS8700CQ present on the NXP TWR-KE18F
    development board. The FXOS8700CQ IRQ lines are not connected by
    default on the TWR-KE18F, so only polling (no trigger) is supported.
    
    Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
  2. samples: sensors: fxos8700: add polling support

    henrikbrixandersen authored and MaureenHelm committed May 13, 2019
    Add support for polling the sensor values of the FXOS8700 device when
    no trigger (interrupt) is enabled.
    
    Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Commits on Jun 27, 2019
  1. gitignore: ignore Emacs TAGS file

    henrikbrixandersen authored and nashif committed Jun 24, 2019
    Ignore the Emacs TAGS file generated by scripts/tags.sh. Move the
    entry for the lower-case tags file to the correct section.
    
    Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Commits on Jun 24, 2019
  1. tests: drivers: can: stm32: determine CAN device at compile-time

    henrikbrixandersen authored and MaureenHelm committed Jun 18, 2019
    Determine the CAN device (CAN_0 or CAN_1) at compile-time.
    
    Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
  2. samples: drivers: CAN: add support for twr_ke18f board

    henrikbrixandersen authored and MaureenHelm committed Jun 18, 2019
    Add support for the NXP TWR-KE18F developement board to CAN sample.
    
    Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
  3. boards: twr_ke18f: enable CAN controller

    henrikbrixandersen authored and MaureenHelm committed Jun 6, 2019
    Enable CAN bus controller on the NXP TWR-KE18F development board.
    
    Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
  4. soc: nxp: ke1xf: add CAN support

    henrikbrixandersen authored and MaureenHelm committed Jun 6, 2019
    Add support for the FlexCAN controllers found in the NXP Kinetis KE1xF
    SoC series.
    
    Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
  5. soc: arm: nxp: ke1xf: enable MCUX SCG clock controller driver

    henrikbrixandersen authored and MaureenHelm committed Jun 16, 2019
    Enable the MCUX SCG clock controller driver by default for the NXP
    Kinetis KE1xF SoC series. Move the generic CLKOUT configuration from
    SoC to the clock controller driver.
    
    Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
  6. drivers: clock_control: mcux_scg: add NXP MCUX SCG clock control driver

    henrikbrixandersen authored and MaureenHelm committed Jun 16, 2019
    Add clock controller driver for the NXP Kinetis System Clock Generator
    (SCG) clock module.
    
    Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
  7. drivers: can: add support for the NXP Kinetis FlexCAN controller

    henrikbrixandersen authored and MaureenHelm committed Jun 6, 2019
    Add MCUX driver shim for the NXP Kinetis FlexCAN CAN bus controller.
    
    Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
  8. dts: can: allow individual specification of prop seg and phase seg1 q…

    henrikbrixandersen authored and MaureenHelm committed Jun 17, 2019
    …uanta
    
    Allow individual specification of the time quanta used for the CAN bus
    propagation segment and phase segment 1.
    
    Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
  9. tests: drivers: can: api: add support for CAN_0

    henrikbrixandersen authored and MaureenHelm committed Jun 16, 2019
    Add support for using CAN_0 interface in the CAN API tests.
    
    Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
  10. drivers: can: add support for two CAN controller instances

    henrikbrixandersen authored and MaureenHelm committed Jun 6, 2019
    Add support for two CAN bus controller instances and disable both of
    them by default. Enable CAN_1 for the STM boards currently supporting
    CAN.
    
    Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Commits on Jun 18, 2019
  1. drivers: adc: mcux_adc12: fix compilation

    henrikbrixandersen authored and MaureenHelm committed Jun 17, 2019
    Fix compilation of NXP MCUX ADC12 driver shim after commit
    d4a0c3a.
    
    Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Commits on Jun 7, 2019
  1. tests: drivers: adc_api: add support for the twr_ke18f board

    henrikbrixandersen authored and MaureenHelm committed Jun 5, 2019
    Add ADC configuration for the NXP TWR-KE18F development board.
    
    Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
  2. boards: arm: twr_ke18f: add ADC support

    henrikbrixandersen authored and MaureenHelm committed May 16, 2019
    Add support for reading the onboard potentiometer (ADC0 channel
    12) and thermistor (ADC0 channels 0 and 1).
    
    Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
  3. soc: nxp: ke1xf: add ADC12 support

    henrikbrixandersen authored and MaureenHelm committed May 16, 2019
    Add support for the three ADC12 modules present in the NXP Kinetis
    KE1xF SoC series.
    
    Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
  4. drivers: adc: mcux_adc12: add driver for the NXP ADC12 module

    henrikbrixandersen authored and MaureenHelm committed May 16, 2019
    Add MCUX driver shim for the NXP Kinetis 12-bit ADC module (ADC12).
    
    Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Commits on Jun 3, 2019
  1. boards: twr_ke18f: configure SPI CS pins as GPIO if not used for SPI

    henrikbrixandersen authored and MaureenHelm committed Jun 1, 2019
    Configure the LPSPI PCSx pins as GPIO if not dedicated to SPI CS. This
    allows using them for SPI GPIO CS.
    
    Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Commits on May 31, 2019
  1. tests: benchmarks: latency_measure: use 0.1s sys clk tick for twr_ke18f

    henrikbrixandersen authored and MaureenHelm committed May 25, 2019
    Use a system clock tick of 0.1 sec when running on the NXP TWR-KE18F
    development board.
    
    Fixes #16234.
    
    Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
  2. tests: drivers: spi_loopback: add twr_ke18f configuration

    henrikbrixandersen authored and MaureenHelm committed May 26, 2019
    Add SPI loopback test configuration for the NXP TWR-KE18F development
    board.
    
    Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
  3. boards: arm: twr_ke18f: add SPI support

    henrikbrixandersen authored and MaureenHelm committed May 16, 2019
    Add SPI support to the NXP TWR-KE18F development board. There are no
    onboard SPI devices, but both SPI busses are available on the primary
    Tower System elevator connector.
    
    Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
  4. soc: nxp: ke1xf: add SPI support

    henrikbrixandersen authored and MaureenHelm committed May 16, 2019
    Add SPI support to the NXP Kinetis KE1xF SoC family.
    
    Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
  5. ext: hal: nxp: mcux_lpspi: add support for NXP Kinetis LPSPI modules

    henrikbrixandersen authored and MaureenHelm committed May 16, 2019
    Add support for MCUX LPSPI on NXP Kinetis SoCs.
    
    Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
  6. tests: flash_map: configure MPU to allow flash writes on twr_ke18f

    henrikbrixandersen authored and MaureenHelm committed May 31, 2019
    Configure the NXP MPU to allow flash writes when running the flash_map
    test.
    
    This fixes #16224.
    
    Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Commits on May 28, 2019
  1. boards: twr_ke18f: list hwinfo as supported feature

    henrikbrixandersen authored and MaureenHelm committed May 25, 2019
    List hwinfo as a supported feature on the NXP TWR-KE18F development
    board.
    
    Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Commits on May 27, 2019
  1. ext: segger: update to SystemView v2.52h

    henrikbrixandersen authored and nashif committed Apr 21, 2019
    Update the external Segger RTT and SystemView libraries to version
    2.52h.
    
    This fixes #14082.
    
    Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
  2. drivers: counter: mcux_rtc: allow setting a new alarm from the callback

    henrikbrixandersen authored and nashif committed May 21, 2019
    Allow setting a new alarm from the callback context of the just
    expired alarm.
    
    Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Commits on May 26, 2019
  1. tests: kernel: common: add missing userspace tag

    henrikbrixandersen authored and nashif committed May 25, 2019
    Add missing userspace tag to the kernel/common test suite.
    
    Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Commits on May 24, 2019
  1. boards: arm: twr_ke18f: add I2C support

    henrikbrixandersen authored and MaureenHelm committed May 14, 2019
    Add I2C support to the NXP TWR-KE18F development board.
    
    Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Older
You can’t perform that action at this time.