Skip to content
Permalink
Branch: master
Commits on Jul 10, 2019
  1. tests: settings: adding nvs backend configuration to functional tests

    kapi-no authored and ioannisg committed Jul 2, 2019
    Added the NVS backend configuration to functional tests of the Settings
    module.
    
    Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
  2. settings: adding new nvs backend

    kapi-no authored and ioannisg committed Jun 24, 2019
    Added NVS backend to the Settings subsystem.
    
    Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Commits on May 27, 2019
  1. Bluetooth: smp: adding LE SC OOB support for peripheral side

    kapi-no authored and carlescufi committed Mar 12, 2019
    Added support for the LE SC pairing with the OOB data. The peripheral
    side is only supported for now.
    
    Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
  2. Bluetooth: extending API for OOB pairing

    kapi-no authored and carlescufi committed Mar 12, 2019
    This change extends the Bluetooth API to support pairing with the OOB
    data that are used in the Authentication Stage of the pairing procedure.
    The LE Secure Connections specific API for OOB pairing is also added.
    The general OOB API should be able to accomodate the LE legacy pairing
    later on.
    
    Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
  3. tests: fs: nvs: unittest with corrupted sector close op

    kapi-no authored and carlescufi committed May 27, 2019
    Added a test case with corner case scenario, in which sector closing
    operation is interrupted (e. g. due to power-down).
    
    Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
  4. tests: fs: nvs: moving nvs_clear to setup method

    kapi-no authored and carlescufi committed May 22, 2019
    Flash clearing operation is now moved to the setup method inside the
    NVS unit test.
    
    Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
  5. drivers: flash: flash_simulator: added max len param

    kapi-no authored and carlescufi committed May 22, 2019
    Added a new runtime parameter to the Flash Simulator. It can be used to
    ignore part of the data that is written to the simulated flash memory.
    This parameter works together with max write calls parameter.
    
    Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
  6. drivers: flash: flash_simulator: added max erase calls param

    kapi-no authored and carlescufi committed May 22, 2019
    Added a new runtime parameter to the Flash Simulator. It can be used to
    ignore erases to the simulated flash memory after a certain number
    of flash erase calls has been executed.
    
    Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Commits on May 22, 2019
  1. tests: fs: nvs: garbage collector test

    kapi-no authored and carlescufi committed May 20, 2019
    Added a simple test for the NVS Garbage Collector.
    
    Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
  2. tests: fs: nvs: test cases clean up flash on completion

    kapi-no authored and carlescufi committed May 20, 2019
    Modified tests for the NVS to clean up the flash memory at the end of
    their execution.
    
    Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Commits on May 13, 2019
  1. tests: fs: nvs: added basic unittests for nvs

    kapi-no authored and carlescufi committed Apr 29, 2019
    Added basic tests for the NVS file system. One of the tests covers power
    down during the flash write operation.
    
    Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
  2. drivers: flash: flash_simulator: added max write calls param

    kapi-no authored and carlescufi committed Apr 26, 2019
    Added a new runtime parameter to the Flash Simulator. It can be used to
    ignore any writes to the simulated flash memory after a certain number
    of flash write calls has been executed. This behaviour is useful for
    simulating power down during the flash write operation.
    
    Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
  3. fs: nvs: format specifier alignment

    kapi-no authored and carlescufi committed Apr 25, 2019
    Aligned format specifiers for the NVS FS. Now, the format specifier
    matches the variable type for qemu_x86 types.
    
    Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Commits on May 1, 2019
  1. stats: changed API to use zephyr types

    kapi-no authored and nashif committed Apr 26, 2019
    Changed API of the Statistics module. Now it uses Zephyr types.
    
    Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
  2. drivers: flash: covering more flash page with stats sections

    kapi-no authored and nashif committed Apr 25, 2019
    Extended the maximum possible number of sections that track statistics
    for each flash page.
    
    Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
  3. util: extending UTIL_DEC_N definitions

    kapi-no authored and nashif committed Apr 18, 2019
    Extended the UTIL_DEC_N definitions to handle the UTIL_REPEAT macro with
    up to 256 repetitions.
    
    Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
  4. stats: extending api to handle statistics with more than 256 elements

    kapi-no authored and nashif committed Apr 18, 2019
    Changed type of the paramater that determines the number of elements in
    the stats group. Now it is possible to declared more than 256 elements.
    
    Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Commits on Apr 26, 2019
  1. tests: drivers: flash_simulator: removing CONFIG_ prefix from defines

    kapi-no authored and galak committed Apr 26, 2019
    Removed the CONFIG_ prefix from definitions, which are declared in the
    test source file. They could be easily confused with Kconfig
    definitions.
    
    Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
  2. drivers: flash: simulator Kconfig cleanup

    kapi-no authored and galak committed Apr 26, 2019
    Moved the default selection of Flash simulator for qemu_x86 to the board
    Kconfig.
    
    Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
  3. dts: flash simulator cleanup

    kapi-no authored and galak committed Apr 26, 2019
    Moved the DT node description for Flash simulator to the board dts file.
    
    Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Commits on Apr 24, 2019
  1. driver: flash: flash_simulator: moved part of Kconfig to DT

    kapi-no authored and carlescufi committed Apr 23, 2019
    Moved part of the KConfig configuration to the Device Tree.
    
    Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
  2. boards: qemu_x86: reducing flash size

    kapi-no authored and carlescufi committed Apr 23, 2019
    Reduced flash size for QEMU x86 so it does not consume a lot of RAM
    memory where it is simulated.
    
    Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
  3. tests: storage: flash_map: adding qemu platform

    kapi-no authored and carlescufi committed Apr 18, 2019
    Added QEMU platform to the Flash Map test and defined partitions for
    QEMU dts.
    
    Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
  4. drivers: flash: flash_simulator enabled by default on qemu

    kapi-no authored and carlescufi committed Apr 18, 2019
    Enabled Flash Simulator on the QEMU x86 platform by default.
    
    Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
  5. boards: changing flash simulator device name alias

    kapi-no authored and carlescufi committed Apr 18, 2019
    Changed alias used for flash simulator device name to match the real
    one.
    
    Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
  6. drivers: flash: fix flash-simulator build crash

    kapi-no authored and carlescufi committed Apr 18, 2019
    Statistic for flash has limitation regards number of pages possible to
    be counted. This path introduces check for that in source file as it is
    not possible to preserve the limit in Kconfig.
    
    Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
    Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
  7. tests: drivers: add flash_simulator driver

    kapi-no authored and carlescufi committed Apr 18, 2019
    This commit adds a tests for flash simulator driver implementation
    for qemu_x86 boards.
    
    Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
    Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
  8. drivers: flash: add flash_simulator driver

    kapi-no authored and carlescufi committed Apr 18, 2019
    This commit adds a flash driver implementation that writes to RAM and
    exports statistics through stats.h. It can be used to simulate flash
    memory for testing purposes.
    
    Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
    Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
    Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
  9. bluetooth: host: format specifier alignment

    kapi-no authored and carlescufi committed Apr 8, 2019
    Aligned format specifiers for the Bluetooth Host. Now, the format
    specifier matches the variable type.
    
    Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Commits on Apr 17, 2019
  1. Bluetooth: hci: adding AD types used for OOB pairing

    kapi-no authored and jhedberg committed Mar 13, 2019
    Added new AD Types that can be used to encode the OOB data.
    
    Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Commits on Feb 18, 2019
  1. Bluetooth: gatt: ccc changed cb after connection cb

    kapi-no authored and nashif committed Feb 18, 2019
    Changed the order of Bluetooth callbacks. Now the connected callback is
    received before CCC changed callbacks.
    
    Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Commits on Oct 2, 2018
  1. ext: hal: nrfx: adding nfct driver to Kconfig

    kapi-no authored and nashif committed Oct 2, 2018
    Added configuration option for NFCT driver to Kconfig.
    
    Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
  2. ext: hal: nrfx: adding timer driver to Kconfig

    kapi-no authored and nashif committed Sep 28, 2018
    Added configuration option for TIMER driver to Kconfig.
    
    Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
  3. ext: hal: nrfx: adding clock driver to Kconfig

    kapi-no authored and nashif committed Sep 28, 2018
    Added configuration option for CLOCK driver to Kconfig.
    
    Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Commits on Sep 25, 2018
  1. Bluetooth: host: always set address via HCI before scanning

    kapi-no authored and jhedberg committed Sep 25, 2018
    The address of the device is also set via HCI interface when passive
    scanning is used. As a result, LL does not filter out directed
    advertising packets that are targeted at this device.
    
    Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Older
You can’t perform that action at this time.