@sappo sappo released this Jan 12, 2019

Assets 6

0MQ version 4.3.1 stable, released on 2019/01/12

  • CVE-2019-6250: A vulnerability has been found that would allow attackers to direct a peer to
    jump to and execute from an address indicated by the attacker.
    This issue has been present since v4.2.0. Older releases are not affected.
    NOTE: The attacker needs to know in advance valid addresses in the peer's
    memory to jump to, so measures like ASLR are effective mitigations.
    NOTE: this attack can only take place after authentication, so peers behind
    CURVE/GSSAPI are not vulnerable to unauthenticated attackers.
    See #3351 for more details.
    Thanks to Guido Vranken for uncovering the issue and providing the fix!

  • Note for packagers: as pkg-config's Requires.private is now used to properly
    propagate dependencies for static builds, the libzmq*-dev or zeromq-devel or
    equivalent package should now depend on the libfoo-dev or foo-devel packages
    of all the libraries that zmq is linked against, or pkg-config --libs libzmq
    will fail due to missing dependencies on end users machines.

  • Fixed #3351 - remote code execution vulnerability.

  • Fixed #3343 - race condition in ZMQ_PUSH when quickly disconnecting and
    reconnecting causes last part of multi-part message to get
    "stuck" and resent by mistake to the new socket.

  • Fixed #3336 - set Requires.private in generate pkg-config file.

  • Fixed #3334 - set TCP_NODELAY after connect() on Windows for the I/O socket.

  • Fixed #3326 - assert on Android when opening a socket and disabling WiFi.

  • Fixed #3320 - build failure on OpenBSD with GCC.

@sappo sappo released this Nov 28, 2018

Assets 6

0MQ version 4.3.0 stable, released on 2018/11/28

  • The following DRAFT APIs have been marked as STABLE and will not change
    anymore:

    • ZMQ_MSG_T_SIZE context option (see doc/zmq_ctx_get.txt)
    • ZMQ_THREAD_AFFINITY_CPU_ADD and ZMQ_THREAD_AFFINITY_CPU_REMOVE (Posix only)
      context options, to add/remove CPUs to the affinity set of the I/O threads.
      See doc/zmq_ctx_set.txt and doc/zmq_ctx_get.txt for details.
    • ZMQ_THREAD_NAME_PREFIX (Posix only) context option, to add a specific
      integer prefix to the background threads names, to easily identify them.
      See doc/zmq_ctx_set.txt and doc/zmq_ctx_get.txt for details.
    • ZMQ_GSSAPI_PRINCIPAL_NAMETYPE and ZMQ_GSSAPI_SERVICE_PRINCIPAL_NAMETYPE
      socket options, for the corresponding GSSAPI features. Additional
      definitions for principal name types:
      • ZMQ_GSSAPI_NT_HOSTBASED
      • ZMQ_GSSAPI_NT_USER_NAME
      • ZMQ_GSSAPI_NT_KRB5_PRINCIPAL
        See doc/zmq_gssapi.txt for details.
    • ZMQ_BINDTODEVICE socket option (Linux only), which will bind the
      socket(s) to the specified interface. Allows to use Linux VRF, see:
      https://www.kernel.org/doc/Documentation/networking/vrf.txt
      NOTE: requires the program to be ran as root OR with CAP_NET_RAW
    • zmq_timers_* APIs. These functions can be used for cross-platforms timed
      callbacks. See doc/zmq_timers.txt for details.
    • The following socket monitor events:
      • ZMQ_EVENT_HANDSHAKE_FAILED_NO_DETAIL: unknown errors during handshake.
      • ZMQ_EVENT_HANDSHAKE_SUCCEEDED: Handshake completed with authentication.
      • ZMQ_EVENT_HANDSHAKE_FAILED_PROTOCOL: Protocol errors with peers or ZAP.
      • ZMQ_EVENT_HANDSHAKE_FAILED_AUTH: Failed authentication requests.
        See doc/zmq_socket_monitor.txt for more details and error codes.
    • zmq_stopwatch_intermediate which returns the time elapsed without stopping
      the stopwatch.
    • zmq_proxy_steerable command 'STATISTICS' to retrieve stats about the amount
      of messages and bytes sent and received by the proxy.
      See doc/zmq_proxy_steerable.txt for more information.
  • The build-time configuration option to select the poller has been split, and
    new API_POLLER (CMake) and --with-api-poller (autoconf) options will now
    determine what system call is used to implement the zmq_poll/zmq_poller APIs.
    The previous POLLER and --with-poller options now only affects the
    internal I/O thread. In case API_POLLER is not specified, the behaviour keeps
    backward compatibility intact and will be the same as with previous releases.

  • The non-default "poll" poller for the internal I/O thread (note: NOT for the
    zmq_poll/zmq_poller user APIs!) has been disabled on Windows as WSAPoll does
    not report connection failures. For more information see:

  • New epoll implementation for Windows, using the following implementation:
    https://github.com/piscisaureus/wepoll/tree/v1.5.4
    To use this, select "epoll" as the poller option in the build system.
    Note for distributors: the wepoll source code is embedded and distributed.
    It is licensed under the BSD-2-Clause and thus it is compatible with LGPL-3.0.
    Note that, if selected at build time, the license text must be distributed
    with the binary in accordance to the license terms. A copy can be found at:
    external/wepoll/license.txt

  • The pre-made Visual Studio solutions file are deprecated, and users are
    encouraged to use the CMake solution generation feature instead.

  • New DRAFT (see NEWS for 4.2.0) socket options:

    • ZMQ_ROUTER_NOTIFY to deliver a notification when a peer connects and/or
      disconnects in the form of a routing id plus a zero-length frame.
    • ZMQ_MULTICAST_LOOP to control whether the data sent should be looped back
      on local listening sockets for UDP multicast sockets (ZMQ_RADIO).
      See doc/zmq_setsockopt.txt and doc/zmq_getsockopt.txt for details.
  • New perf tool, perf/benchmark_radix_tree, to measure the performance of the
    different internal implementations of the trie algorithm used to track
    subscriptions. Requires a compiler that supports C++11.

  • New autoconf flag "--enable-force-CXX98-compat" which will force -std=gnu++98
    and, if the compiler supports them (clang++ at the moment), it will also add
    -Wc++98-compat -Wc++98-compat-pedantic so that compatibility with C++98 can
    be tested.

  • Many, many coding style, duplication and static analysis improvements.

  • Many, many improvements to the CMake build system, especially on Windows.

  • Many, many improvements to unit tests.

  • Fixed #3036 - Compilation error when -pedantic is used.

  • Fixed #3028 - Failure when zmq_poller_destroy is called after zmq_ctx_term.

  • Fixed #2989 - CMake: Linker PDB install rule does not work when Visual Studio
    generators are used.

  • Fixed #3045 - configure.ac: search for dladdr only when using libunwind.

  • Fixed #3060 - REQ sockets terminate TCP connection after first heartbeat if
    ZMQ_HEARTBEAT_IVL is set.

  • Fixed #2212 - UDP: need ability to specify bind address separately from
    multicast address for multi-homed hosts.

  • Fixed #2891 - UDP: address name resolution is limited to dotted IPv4 rather
    than being capable of IPv4, IPv6, and hostname lookup.

  • Fixed #3085 - autoconf/CMake getrandom test does not check if it's working but
    only for its presence.

  • Fixed #3090 - compilation broken with Solaris Studio.

  • Fixed #3094 - UDP: pass interface via IP[V6]_MULTICAST_IF if provided.

  • Fixed #3061 - implement ZMTP 3.1 ping/pong context sending/receiving.

  • Fixed #2188 - Added documentation for new zmq_poller API.

  • Fixed #3088 - zmq_poller_add/zmq_poller_modify should reject invalid events
    arguments.

  • Fixed #3042 - Fixed compilation on ARM with ZMQ_ATOMIC_PTR_MUTEX.

  • Fixed #3107 - test_immediate_3/test_reconnect_inproc do not terminate with
    POLL as the I/O thread poller under Windows.

  • Fixed #3046 - Aborts when iOS abuses EBADF to report a socket has been
    reclaimed.

  • Fixed #3136 - Cannot set ZMQ_HEARTBEAT_TTL to more than 655.3 seconds.

  • Fixed #3083 - link with -latomic when needed.

  • Fixed #3162 - build failure with MUSL libc.

  • Fixed #3158 - -1 value of ZMQ_RECONNECT_IVL was not correctly handled on some
    platforms.

  • Fixed #3170 - improved documentation for ZMQ_PAIR.

  • Fixed #3168 - correctly use symbols map on Debian/kFreeBSD and Debian/HURD
    to avoid exporting standard library symbols.

  • Fixed #3168 - correctly process ZMTP 3.1 cancel/subscribe commands.

  • Fixed #3171 - improve documentation for ZMQ_CONFLATE.

  • Fixed #2876 - stack overflow on Windows 64.

  • Fixed #3191 - race condition with received message causes
    ZMQ_CONNECT_ROUTING_ID to be assigned to wrong socket.

  • Fixed #3005 - added documentation for new zmq_timers_* API.

  • Fixed #3222 - use /Z7 debug on Release builds too on Windows (CMake).

  • Fixed #3226 - possible PGM receiver crash.

  • Fixed #3236 - UDP dish socket can't bind to a multicast port already in use.

  • Fixed #3242 - improve HWM documentation.

  • Fixed #2488 - improve zmq_msg_send doc return value documentation.

  • Fixed #3268 - HWM in ZMQ_DGRAM socket does not respect multipart message.

  • Fixed #3284 - added support for ZMQ_MULTICAST_HOPS with UDP sockets.

  • Fixed #3245 - use-after-free reported in zmq::pipe_t::terminate.

  • Fixed #1400 - use patricia trie for subscription to improve performances and
    memory usage. Note: only active in DRAFT builds for now.

  • Fixed #3263 - fix abort on Windows when a large TCP read is requested and
    fails.

  • Fixed #3312 - fix build on Android Things 1.06 with Termux.

@sappo sappo released this Mar 23, 2018 · 618 commits to master since this release

Assets 6

0MQ version 4.2.5 stable, released on 2018/03/23

  • Fixed #3018 - fix backward-incompatible change in the NULL auth
    mechanism that slipped in 4.2.3 and made connections
    with a ZAP domain set on a socket but without a working
    ZAP handler fail. See ZMQ_ZAP_ENFORCE_DOMAIN and RFC27.

  • Fixed #3016 - clarify in zmq_close manpage that the operation will
    complete asynchronously.

  • Fixed #3012 - fix CMake build problem when using LIBZMQ_WERROR and a
    compiler other than GCC.

@sappo sappo released this Mar 21, 2018 · 638 commits to master since this release

Assets 6
  • New DRAFT (see NEWS for 4.2.0) socket options:

    • ZMQ_LOOPBACK_FASTPATH to enable faster TCP loopback on Windows
    • ZMQ_METADATA to set application-specific metadata on a socket
      See doc/zmq_setsockopt.txt and doc/zmq_getsockopt.txt for details.
  • New DRAFT (see NEWS for 4.2.0) context options:

    • ZMQ_ZERO_COPY_RECV to disable zero-copy receive to save memory
      at the expense of slower performance
      See doc/zmq_ctx_set.txt and doc/zmq_ctx_get.txt for details.
  • New DRAFT API zmq_stopwatch_intermediate which returns the time
    elapsed without stopping the stopwatch.

  • TIPC: support addressing TIPC Port Identity addresses.

  • Added CMake option to disable tests: BUILD_TESTS

  • Added CMake and autotools make targets to support clang-formatter:
    make clang-format, clang-format-check and clang-format-diff to
    help developers make sure their code conforms to the style guidelines

  • For distributors: a new test framework has been added, which
    includes a copy of the Unity source code. This source code library is
    distributed under the MIT license and thus is compatible with
    libzmq's LGPL3.

  • Fixed #2867 - add ZeroMQConfig.cmake.in to distributable tarball

  • Fixed #2868 - fix OpenBSD build

  • Fixed #2870 - fix VC++ 11.0 (VS2012) build

  • Fixed #2879 - prevent duplicate connections on PUB sockets

  • Fixed #2872 - fix CMake tests on Windows

  • Fixed #2895 - fix assert on Windows with POLL

  • Fixed #2920 - fix Windows build with Intel compiler

  • Fixed #2930 - use std::atomic when available with VC++ and VS2015

  • Fixed #2910 - fix race condition with ZMQ_LINGER socket option

  • Fixed #2927 - add support for ZMQ_XPUB_NODROP on ZMQ_RADIO

  • Fixed #2820 - further clarify ZMQ_XPUB_VERBOSE(R) documentation.

  • Fixed #2911 - ZMQ_DISH over UDP triggers errno_assert() after hitting
    watermark

  • Fixed #2942 - ZMQ_PUB crash when due to high volume of subscribe and
    unsubscribe messages, an unmatched unsubscribe message is
    received in certain conditions

  • Fixed #2946 - fix Windows CMake build when BUILD_SHARED is off

  • Fixed #2960 - fix build with GCC 8

  • Fixed #2967 - fix race condition on thread safe sockets due to pthread
    condvar timeouts on OSX

  • Fixed #2977 - fix TIPC build-time availability check to be more relaxed

  • Fixed #2966 - add support for WindRiver VxWorks 6.x

  • Fixed #2963 - fix some PVS Studio static analysis warnings

  • Fixed #2983 - fix MinGW cross-compilation

  • Fixed #2991 - fix mutex assert at shutdown when the zmq context is part
    of a class declared as a global static

@sappo sappo released this Dec 13, 2017 · 876 commits to master since this release

Assets 6

0MQ version 4.2.3 stable, released on 2017/12/13

  • API change: previously ZMQ_POLLOUT on a ZMQ_ROUTER socket returned always
    true due to how the type works. When ZMQ_ROUTER_MANDATORY is set, sending
    fails when the peer is not available, but ZMQ_POLLOUT always returns true
    anyway, which does not make sense. Now when ZMQ_ROUTER_MANDATORY is set,
    ZMQ_POLLOUT on a ZMQ_ROUTER will return true only if at least one peer is
    available.
    Given ZMQ_POLLOUT with ZMQ_ROUTER was not usable at all previously, we do
    not consider this a breakage warranting a major or minor version increase.

  • ZMQ_IDENTITY has been renamed to ZMQ_ROUTING_ID and ZMQ_CONNECT_RID has been
    renamed to ZMQ_CONNTECT_ROUTING_ID to disambiguate. ZMQ_IDENTITY and
    ZMQ_CONNECT_RID are still available to keep backward compatibility, and will
    be removed in a future release after further advance notice.

  • DRAFT API change: zmq_poller_wait, zmq_poller_wait_all and zmq_poller_poll
    have been changed to be inline with other existing APIs that have a timeout
    to return EAGAIN instead of ETIMEDOUT as the errno value.
    See #2713 for details.

  • Existing non-DRAFT socket types ZMQ_REP/REQ, ZMQ_ROUTER/DEALER and
    ZMQPUB/SUB, that were previously declared deprecated, have been reinstated
    as stable and supported. See #2699 for details.

  • Tweetnacl: add support for, and use preferably if available, getrandom() as
    a simpler and less error-prone alternative to /dev/urandom on OSes where it
    is available (eg: Linux 3.18 with glibc 2.25).

  • Curve: all remaining traces of debug output to console are now removed, and
    new DRAFT events are available to properly debug CURVE, PLAIN, GSSAPI and
    ZAP events and failures. See below for details on the new events.

  • New DRAFT (see NEWS for 4.2.0) socket options:

    • ZMQ_GSSAPI_PRINCIPAL_NAMETYPE and ZMQ_GSSAPI_SERVICE_PRINCIPAL_NAMETYPE, for
      the corresponding GSSAPI features. Additional definitions for principal
      name types:
      • ZMQ_GSSAPI_NT_HOSTBASED
      • ZMQ_GSSAPI_NT_USER_NAME
      • ZMQ_GSSAPI_NT_KRB5_PRINCIPAL
        See doc/zmq_gssapi.txt for details.
    • ZMQ_BINDTODEVICE (Linux only), which will bind the socket(s) to the
      specified interface. Allows to use Linux VRF, see:
      https://www.kernel.org/doc/Documentation/networking/vrf.txt
      NOTE: requires the program to be ran as root OR with CAP_NET_RAW
    • ZMQ_ZAP_ENFORCE_DOMAIN, enables strict RFC 27 compatibility mode and makes
      the ZAP Domain mandatory when using security. See:
      https://rfc.zeromq.org/spec:27/ZAP
      See doc/zmq_setsockopt.txt and doc/zmq_getsockopt.txt for details.
  • New DRAFT (see NEWS for 4.2.0) context options:

    • ZMQ_THREAD_AFFINITY_CPU_ADD and ZMQ_THREAD_AFFINITY_CPU_REMOVE (Posix only),
      to add and remove CPUs to the affinity set of the I/O threads. Useful to pin
      the background threads to specific CPUs.
    • ZMQ_THREAD_NAME_PREFIX (Posix only), to add a specific integer prefix to the
      background threads names, to easily identify them for debugging purposes.
      See doc/zmq_ctx_set.txt and doc/zmq_ctx_get.txt for details.
  • New DRAFT (see NEWS for 4.2.0) message property name definitions to facilitate
    the use of zmq_msg_gets:

    • ZMQ_MSG_PROPERTY_ROUTING_ID
    • ZMQ_MSG_PROPERTY_SOCKET_TYPE
    • ZMQ_MSG_PROPERTY_USER_ID
    • ZMQ_MSG_PROPERTY_PEER_ADDRESS
      See doc/zmq_msg_gets.txt for details.
  • New DRAFT (see NEWS for 4.2.0) API zmq_socket_get_peer_state, to be used to
    query the state of a specific peer (via routing-id) of a ZMQ_ROUTER socket.

  • New DRAFT (see NEWS for 4.2.0) Socket Monitor events:

    • ZMQ_EVENT_HANDSHAKE_FAILED_NO_DETAIL, unknown system error and returns errno
    • ZMQ_EVENT_HANDSHAKE_SUCCEEDED, handshake was successful
    • ZMQ_EVENT_HANDSHAKE_FAILED_PROTOCOL, protocol errors between peers or server
      and ZAP handler. Returns one of ZMQ_PROTOCOL_ERROR_* - see manpage for list
    • ZMQ_EVENT_HANDSHAKE_FAILED_AUTH, failed authentication, returns ZAP status
      These events trigger when the ZMTP security mechanism handshake is
      completed or failed. See doc/zmq_socket_monitor.txt for more information.
  • New DRAFT (see NEWS for 4.2.0) zmq_proxy_steerable command 'STATISTICS' to
    retrieve stats about the amount of messages and bytes sent and received by
    the proxy. See doc/zmq_proxy_steerable.txt for more information.

  • Add new autoconf --disable-libunwind option to stop building with libunwind
    even if it is available.

  • Add new autoconf --disable-Werror option to avoid building with the Werror
    flag.

  • Use pkg-config as the first method for finding and building with external
    optional dependencies such as libnorm, libpgm and gssapi.

  • On Posix platform where the feature is available, name the ZMQ background
    threads to simplify debugging: "ZMQbg/<num_thread>"

  • Improve performance of zmq_poller_* (and zmq_poll and zmq_proxy when building
    with DRAFT APIs enabled).

  • The TCP unit tests have been refactored to bind and connect to random ports
    rather than hard-coded ones, to allow running tests in parallel.
    There are 6 exceptions where it is necessary to use an hard-coded port to
    test specific code paths that would not be exercised when binding to a
    wildcard port. These are listed in tests/testutil.hpp so that distributions
    can easily patch them if they wish to and so that they can be unique across
    all the tests, allowing parallel runs.
    The IPC unit tests have been changed as well to use unique socket file names
    per test, where before there were some clashes.

  • Fixed #2349 - fix building with libsodium when using CMake

  • Fixed #2334 - do not assert when tuning socket options fails due to network
    errors, but simply retry again when connecting or send a socket monitor
    ZMQ_EVENT_ACCEPT_FAILED event when binding

  • Fixed #2341 - fix source files path in VS2015 solution

  • Fixed #2344 - Note that on Windows with VS2012 it is mandatory to increase
    the default stack size to at least 2MB

  • Fixed #2348 - ZMQ_ROUTER send with ZMQ_ROUTER_MANDATORY can be stuck in case of
    network problem

  • Fixed #2358 - occasional abort on zmq_connect on Windows

  • Fixed #2370 - zmq_curve_keypair should return an error on failure rather
    than ignoring them and always returning 0

  • Fixed #2452 - __STDC_LIMIT_MACROS before precompiled headers causes VC++
    warning

  • Fixed #2457 - fix building with libsodium in Visual Studio solutions

  • Fixed #2466 - add const qualifier to internal and public API that does not
    modify parameters

  • Fixed #2471 - do more checks for OOM conditions when dynamic allocations is
    used

  • Fixed #2476 - assertion causes abort after ZAP stop at shutdown

  • Fixed #2479 - improve zmq_poller performance on Windows

  • Fixed #2481 - potential memory leaks due to ZMTP handshake failures

  • Fixed #2531 - ZMQ_GSSAPI_PRINCIPAL sockopt has no effect on client side

  • Fixed #2535 - add BUILD_SHARED and BUILD_STATIC options to CMake, both on by
    default, to toggle shared and static library builds

  • Fixed #2537 - use SYSTEM_CLOCK on OSX and CLOCK_MONOTONIC elsewhere for
    internal timers to avoid races

  • Fixed #2540 - new zmq_poller used by zmq_poll without DRAFTs

  • Fixed #2552 - Fix WITH_DOC CMake build to avoid checking for asciidoc if the
    option is disabled

  • Fixed #2567 - Memory leak in REP socket handling

  • Fixed #2579 - Compilation issue on Windows with CMake + ninja

  • Fixed #2588 - SIGBUS under 64-bit SunOS Sparc

  • Fixed #2590 - crash when using ZMQ_IMMEDIATE and ZMQ_LINGER to non-zero

  • Fixed #2601 - XPUB_MANUAL subscriptions not removed on peer term

  • Fixed #2602 - intermittent memory leak for ZMQ_REQ/REP send/recv

  • Fixed #2608 - CURVE server (connect) fails when client rebinds

  • Fixed #2610 - print backtraces in mutual exclusion to avoid mixing
    different traces

  • Fixed #2621 - add missing CMake files to distributable tarball

  • Fixed #2630 - improve compatibility with OpenBSD w.r.t. IPV6_V6ONLY

  • Fixed #2638 - note in INSTALL that when using Windows builds on Linux with
    Wine it is necessary to increase the minimum TCP buffers

  • Fixed #2632 - Fix file descriptor leak when using Tweetnacl (internal NACL
    implementation) instead of Libsodium, and fix race condition when using
    multiple ZMQ contexts with Tweetnacl

  • Fixed #2681 - Possible buffer overflow in CURVE mechanism handshake.
    NOTE: this was protected by an assert previously, so there is no security
    risk.

  • Fixed #2704 - test_sockopt_hwm fails occasionally on Windows

  • Fixed #2701 - pgm build via cmake doesn't link libzmq with libpgm

  • Fixed #2711 - ZAP handler communication errors should be handled consistently

  • Fixed #2723 - assertion in src\select.cpp:111 or hang on zmq_ctx_destroy on
    Windows

  • Fixed #2728 - fix support O_CLOEXEC when building with CMake

  • Fixed #2761 - improve compatibility with TrueOS (FreeBSD 12)

  • Fixed #2764 - do not unlink IPC socket files when closing a socket to avoid
    race conditions

  • Fixed #2770 - support lcov 1.13 and newer

  • Fixed #2787 - add libiphlpapi to PKGCFG_LIBS_PRIVATE for static mingw builds

  • Fixed #2788 - document that adding -DZMQ_STATIC is required for Windows
    static builds with Mingw

  • Fixed #2789 - description of zmq_atomic_counter_value return value is cloned
    from zmq_atomic_counter_new

  • Fixed #2791 - fix building with DRAFT APIs on CentOS 6

  • Fixed #2794 - router_t methods should not allocate memory for lookup in
    outpipes

  • Fixed #2809 - optimize select() usage on Windows

  • Fixed #2816 - add CMake and autoconf check for accept4, as it is not
    available on old Linux releases, and fallback to accept + FD_CLOEXEC

  • Fixed #2824 - ZMQ_REQ socket does not report ZMQ_POLLOUT when ZMQ_REQ_RELAXED
    is set

  • Fixed #2827 - add support for Haiku

  • Fixed #2840 - fix building with VS2008

  • Fixed #2845 - correct the ZMQ_LINGER documentation to accurately reflect that
    the default value is -1 (infinite). It never was 30 second in any released
    version, it was only changed briefly and then changed back, but the manpage
    was not reverted.

  • Fixed #2861 - CMake/MSVC: export ZMQ_STATIC when needed.

@sappo sappo released this Feb 18, 2017 · 1667 commits to master since this release

Assets 6

0MQ version 4.2.2 stable, released on 2017/02/18

  • Improve compatibility with GNU Hurd
  • Fixed #2286 - improve CMake on Windows documentation
  • Fixed #1235 - improved compatibility with mingw64
  • Improve zmq_proxy documentation to state it can return ETERM as well
  • Fixed #1442 - SO_NOSIGPIPE and connection closing by peer race condition
  • Improve CMake functionality on Windows: ZeroMQConfig.cmake generation CPack
    option, correct static library filename, ship FindSodium.cmake in tarball
  • Fixed #2228 - setting HWM after connect on inproc transport leads to infinite
    HWM
  • Add support for Visual Studio 2017
  • New DRAFT (see NEWS for 4.2.0) zmq_has option "draft" option that returns
    true if the library was built with DRAFT enabled. Useful for FFI bindings.
    See doc/zmq_has.txt for more information
  • Fixed #2321 - zmq_z85_decode does not validate its input. The function has
    been fixed to correctly follow RFC32 and return NULL if the input is invalid
  • Fixed #2323 - clock_t related crash on Apple iOS 9.3.2 and 9.3.5
  • Fixed #1801 - OSX: Cmake installs libzmq in a weird PATH
  • Fixed potential divide by zero in zmq::lb_t::sendpipe
  • Improve compatibility with OpenIndiana by skipping epoll and using poll/select
  • Fix IPv4-in-IPv6 mapped addresses parsing error

@sappo sappo released this Dec 31, 2016 · 1731 commits to master since this release

Assets 6

0MQ version 4.2.1 stable, released on 2016/12/31

  • New DRAFT (see NEWS for 4.2.0) Socket Monitor events:
    • ZMQ_EVENT_HANDSHAKE_SUCCEED
    • ZMQ_EVENT_HANDSHAKE_FAILED
      These events trigger when the ZMTP security mechanism handshake is
      completed. See doc/zmq_socket_monitor.txt for more information.
  • New DRAFT (see NEWS for 4.2.0) Context options:
    • ZMQ_MSG_T_SIZE
      See doc/zmq_ctx_get.txt for more information.
  • Fixed #2268 - improved compatibility with mingw32
  • Fixed #2254 - ZMQ_PUB compatibility with libzmq 2.x broken
  • Fixed #2245 - added support for VS2017, Windows SDK 10.0.14393.0, toolset v141
  • Fixed #2242 - file descriptors leaks on fork+exec
  • Fixed #2239 - retired poller item crash from reaper thread
  • Fixed #2234 - improved compatibility with AIX 7.1
  • Fixed #2225 - cannot pick select for poller
  • Fixed #2217 - CMake build uses library version as the ABI version
  • Fixed #2208 - added support for ZMQ_TOS on IPv6
  • Fixed #2200 - no documentation for ZMQ_SOCKS_PROXY
  • Fixed #2199 - no documentation for zmq_curve_public
  • Fixed #2196 - fixed build and runtime errors on kFreeBSD

@sappo sappo released this Nov 4, 2016 · 1857 commits to master since this release

Assets 6

0MQ version 4.2.0 stable, released on 2016/11/04

  • For Pieter. Thanks for making all of this possible.

    "Tell them I was a writer.
    A maker of software.
    A humanist. A father.
    And many things.
    But above all, a writer.
    Thank You. :)"

    • Pieter Hintjens
  • This release introduces new APIs, but it is ABI compatible with
    libzmq 4.1.2 and up.

  • Note for ARM and SPARC users: an alignment problem in zmq_msg_t that could in
    some cases and on some CPUs cause a SIGBUS error was solved, but it requires
    a rebuild of your application against the 4.2.0 version of include/zmq.h.
    To clarify, this change does not affect the internals of the library but only
    the public definition of zmq_msg_t, so there is no ABI incompatibility.

  • Security with Curve is now available by default thanks to Tweetnacl sources:
    https://tweetnacl.cr.yp.to/index.html
    Libsodium is still fully supported but has to be enabled with the build flag
    --with-libsodium. Distribution and package maintainers are encouraged to use
    libsodium so that the security implementation can be audited and maintained
    separately.

  • New Context options:

    • ZMQ_MAX_MSGSZ
    • ZMQ_BLOCKY

    See doc/zmq_ctx_set.txt and doc/zmq_ctx_get.txt for details.

  • New Socket options:

    • ZMQ_HANDSHAKE_IVL
    • ZMQ_SOCKS_PROXY
    • ZMQ_XPUB_NODROP
    • ZMQ_XPUB_MANUAL
    • ZMQ_XPUB_WELCOME_MSG
    • ZMQ_STREAM_NOTIFY
    • ZMQ_INVERT_MATCHING
    • ZMQ_HEARTBEAT_IVL
    • ZMQ_HEARTBEAT_TTL
    • ZMQ_HEARTBEAT_TIMEOUT
    • ZMQ_XPUB_VERBOSER
    • ZMQ_CONNECT_TIMEOUT
    • ZMQ_TCP_MAXRT
    • ZMQ_THREAD_SAFE
    • ZMQ_MULTICAST_MAXTPDU
    • ZMQ_VMCI_BUFFER_SIZE
    • ZMQ_VMCI_BUFFER_MIN_SIZE
    • ZMQ_VMCI_BUFFER_MAX_SIZE
    • ZMQ_VMCI_CONNECT_TIMEOUT
    • ZMQ_USE_FD

    See doc/zmq_setsockopt.txt and doc/zmq_getsockopt.txt for details.

  • New CURVE helper function to derive z85 public key from secret key:
    zmq_curve_public

  • New cross-platform atomic counter helper functions:
    zmq_atomic_counter_new, zmq_atomic_counter_set, zmq_atomic_counter_inc,
    zmq_atomic_counter_dec, zmq_atomic_counter_value, zmq_atomic_counter_destroy
    See doc/zmq_atomic_*.txt for details.

  • New DRAFT APIs early-release mechanism. New APIs will be introduced early
    in public releases, and until they are stabilized and guaranteed not to
    change anymore they will be unavailable unless the new build flag
    --enable-drafts is used. This will allow developers and early adopters to
    test new APIs before they are finalized.
    NOTE: as the name implies, NO GUARANTEE is made on the stability of these APIs.
    They might change or disappear entirely. Distributions are recommended NOT to
    build with them.

    New socket types have been introduced in DRAFT state:
    ZMQ_SERVER, ZMQ_CLIENT, ZMQ_RADIO, ZMQ_DISH, ZMQ_GATHER, ZMQ_SCATTER,
    ZMQ_DGRAM
    All these sockets are THREAD SAFE, unlike the existing socket types. They do
    NOT support multipart messages (ZMQ_SNDMORE/ZMQ_RCVMORE).
    ZMQ_RADIO, ZMQ_DISH and ZMQ_DGRAM also support UDP as transport,
    both unicast and multicast. See doc/zmq_udp.txt for more details.
    New methods to support the new socket types functionality:
    zmq_join, zmq_leave, zmq_msg_set_routing_id, zmq_msg_routing_id,
    zmq_msg_set_group, zmq_msg_group
    See doc/zmq_socket.txt for more details.

    New poller mechanism and APIs have been introduced in DRAFT state:
    zmq_poller_new, zmq_poller_destroy, zmq_poller_add, zmq_poller_modify,
    zmq_poller_remove, zmq_poller_wait, zmq_poller_wait_all, zmq_poller_add_fd
    zmq_poller_modify_fd, zmq_poller_remove_fd
    and a new supporting struct typedef: zmq_poller_event_t
    They support existing socket type, new thread-safe socket types and file
    descriptors (cross-platform).
    Documentation will be made available in the future before these APIs are declared
    stable.

    New cross-platform timers helper functions have been introduced in DRAFT state:
    zmq_timers_new, zmq_timers_destroy, zmq_timers_add, zmq_timers_cancel,
    zmq_timers_set_interval, zmq_timers_reset, zmq_timers_timeout,
    zmq_timers_execute
    and a new supporting callback typedef: zmq_timer_fn

  • Many, many bug fixes. The most important fixes are backported and captured in the
    4.1.x and 4.0.x changelogs.

0MQ version 4.2.0 rc1, released on 2016/11/01

  • Many changes, see ChangeLog.

0MQ version 4.1.6 stable, released on 2016/11/01

  • Fixed #2051 - getifaddrs can fail with ECONNREFUSED
  • Fixed #2091 - testutil.hpp fails to build on Windows XP
  • Fixed #2096 - add tests/CMakeLists.in and version.rc.in to dist tar
  • Fixed #2107 - zmq_connect with IPv6 "source:port;dest:port" broken
  • Fixed #2117 - ctx_term assert with inproc zmq_router connect-before-bind
  • Fixed #2158 - Socket monitor uses internal Pair from multiple threads
  • Fixed #2161 - messages dropped due to HWM race
  • Fixed #1325 - alignment issue with zmq_msg_t causes SIGBUS on SPARC and ARM

0MQ version 4.1.5 stable, released on 2016/06/17

  • Fixed #1673 - CMake on Windows put PDB in wrong directory.
  • Fixed #1723 - Family is not set when resolving NIC on Android.
  • Fixed #1608 - Windows 7 TCP slow start issue.
  • Fixed #1806 - uninitialised read in curve getsockopt.
  • Fixed #1807 - build broken with GCC 6.
  • Fixed #1831 - potential assertion failure with latest libsodium.
  • Fixed #1850 - detection issues with tweetnacl/libsodium.
  • Fixed #1877 - Avoid terminating connections prematurely
  • Fixed #1887 - zmq_bind IPv4 fallback still tries IPv6
  • Fixed #1866 - fails to build on SunOS 5.10 / Solaris 10
  • Fixed #919 - ZMQ_LINGER (related to #1877)
  • Fixed #114 - cannot unbind with same endpoint with IPv6 enabled.
  • Fixed #1952 - CMake scripts not part of release tarballs
  • Fixed #1542 - Fix a crash on Windows when port 5905 is in use.
  • Fixed #2021 - Fix building on sparc32.

0MQ version 4.1.4 stable, released on 2015/12/18

  • Fixed #1315 - socket monitor hangs if bind/setsockopt failed.
  • Fixed #1399 - assertion failure in tcp.cpp after network reconnect.
  • Fixed #1632 - build failure using latest libsodium.
  • Fixed #1644 - assertion failure in msg.cpp:390 on STREAM sockets.
  • Fixed #1661 - does not handle IPv6 link local addresses.

0MQ version 4.1.3 stable, released on 2015/08/17

  • Fixed #1532 - getsockopt ZMQ_RCVMORE now resets all bits instead of only 32
  • Fixed #1445 - zmq::socket_base_t::connect fails on tcp ipv6 address

0MQ version 4.1.2 stable, released on 2015/06/15

  • Added explicit reference to static link exception in every source file.
  • Bumped ABI version to 5:0:0 since 4.1.x changed the ABI.
  • Fixed STDINT event interface macros to work with CZMQ 3.0.
  • Fixed installation of man pages when BUILD_DOC is not set.
  • Fixed #1428 - regression on single-socket proxies.

0MQ version 4.1.1 stable, released on 2015/06/02

  • Fixed #1208 - fix recursion in automake packaging.
  • Fixed #1224 - crash when processing empty unsubscribe message.
  • Fixed #1213 - properties files were missing from source packages.
  • Fixed #1273 - V3 protocol handler vulnerable to downgrade attacks.
  • Fixed #1347 - lack way to get peer address.
  • Fixed #1362 - SUB socket sometimes fails to resubscribe properly.
  • Fixed #1377, #1144 - failed with WSANOTINITIALISED in some cases.
  • Fixed #1389 - PUB, PUSH sockets had slow memory leak.
  • Fixed #1382 - zmq_proxy did not terminate if there were no readers.

0MQ version 4.1.0 rc1, released on 2014/10/14

  • All issues that were fixed in 4.0.x
  • Improved client reconnection strategy on errors
  • GSSAPI security mechanism
  • SOCKS5 support (ZMQ_SOCKS_PROXY)
  • ZMQ_ROUTER_HANDOVER
  • ZMQ_TOS
  • ZMQ_CONNECT_RID
  • ZMQ_HANDSHAKE_IVL
  • ZMQ_IDENTITY_FD
  • ZMQ_XPUB_NODROP
  • ZMQ_SRCFD and ZMQ_SHARED message options
  • Message metadata -- zmq_msg_gets ()
  • Probe library configuration -- zmq_has ()

0MQ version 4.0.8 stable, released on 2016/06/17

  • Fixed LIBZMQ-949 - zmq_unbind fails for inproc and wildcard endpoints
  • Fixed #1806 - uninitialised read in curve getsockopt.
  • Fixed #1807 - build broken with GCC 6.
  • Fixed #1877 - Avoid terminating connections prematurely
  • Fixed #1887 - zmq_bind IPv4 fallback still tries IPv6
  • Fixed #98 - don't require libssp without libsodium on Solaris
  • Fixed #919 - ZMQ_LINGER (related to #1877)
  • Fixed #139 - "tempnam" is deprecated.

0MQ version 4.0.7 stable, released on 2015/06/15

  • Fixed #1428 - regression on single-socket proxies.

0MQ version 4.0.6 stable, released on 2015/06/02

  • Fixed #1273 - V3 protocol handler vulnerable to downgrade attacks.
  • Fixed #1362 - SUB socket sometimes fails to resubscribe properly.
  • Fixed #1377, #1144 - failed with WSANOTINITIALISED in some cases.
  • Fixed #1389 - PUB, PUSH sockets had slow memory leak.
  • Fixed #1382 - zmq_proxy did not terminate if there were no readers.
Pre-release

@sappo sappo released this Nov 1, 2016 · 1866 commits to master since this release

Assets 6

This is the first Release Candidate of libzmq 4.2.0. Go forth and test!

If there are no reports of breakages, the stable 4.2.0 will be tagged and get proper release notes.