Skip to content

Comparing changes

Choose two branches to see what’s changed or to start a new pull request. If you need to, you can also compare across forks.

Open a pull request

Create a new pull request by comparing changes across two branches. If you need to, you can also compare across forks.
...
Checking mergeability… Don’t worry, you can still create the pull request.
  • 2 commits
  • 101 files changed
  • 0 commit comments
  • 1 contributor
Commits on Feb 22, 2008
jb-good As promised, here my work on the new build system. It compiles fine f…
…or me, but there needs to be done a few things on gpsim to catch all cases for everybody.

I also touched 2 source files (I had to add an #include "something.moc" to let the automoc macros create the needed moc files)

Also I updated INSTALL to carry information about the cmake build process.

I'll set up a wiki page for the cmake stuff in the next days.


git-svn-id: https://ktechlab.svn.sourceforge.net/svnroot/ktechlab/branches/ktechlab-0.3.6cmake@81 76876f85-f02d-0410-881d-fd707285c4ba
9aa2284
Commits on Feb 25, 2008
jb-good add this file, since it's needed by cmake.. seems, I forgot that duri…
…ng the last commit, sorry for that

git-svn-id: https://ktechlab.svn.sourceforge.net/svnroot/ktechlab/branches/ktechlab-0.3.6cmake@82 76876f85-f02d-0410-881d-fd707285c4ba
b6f06a7
Showing with 1,727 additions and 30,238 deletions.
  1. +41 −0 CMakeLists.txt
  2. +0 −249 Doxyfile
  3. +27 −136 INSTALL
  4. +0 −5 Makefile.am
  5. +0 −10 Makefile.cvs
  6. +0 −102 admin/Doxyfile.am
  7. +0 −192 admin/Doxyfile.global
  8. +0 −37 admin/Makefile.common
  9. +0 −5,973 admin/acinclude.m4.in
  10. +0 −2,445 admin/am_edit
  11. +0 −157 admin/bcheck.pl
  12. +0 −142 admin/compile
  13. +0 −191 admin/conf.change.pl
  14. +0 −1,464 admin/config.guess
  15. +0 −238 admin/config.pl
  16. +0 −1,575 admin/config.sub
  17. +0 −45 admin/configure.in.bot.end
  18. +0 −57 admin/configure.in.min
  19. +0 −661 admin/cvs.sh
  20. +0 −43 admin/debianrules
  21. +0 −530 admin/depcomp
  22. +0 −19 admin/deps.am
  23. +0 −257 admin/detect-autoconf.pl
  24. +0 −883 admin/doxygen.sh
  25. +0 −401 admin/install-sh
  26. +0 −5,891 admin/libtool.m4.in
  27. +0 −6,389 admin/ltmain.sh
  28. +0 −353 admin/missing
  29. +0 −158 admin/mkinstalldirs
  30. +0 −371 admin/nmcheck
  31. +0 −192 admin/oldinclude.m4.in
  32. +0 −57 admin/pkg.m4.in
  33. +0 −223 admin/ylwrap
  34. +294 −0 cmake/modules/FindGLIB.cmake
  35. +79 −0 cmake/modules/FindGPSim.cmake
  36. +7 −0 config.h.cmake
  37. +0 −2 configure.files
  38. +0 −142 configure.in.in
  39. +18 −0 doc/CMakeLists.txt
  40. +0 −7 doc/Makefile.am
  41. +17 −0 doc/en/CMakeLists.txt
  42. +0 −7 doc/en/Makefile.am
  43. +16 −0 examples/555/CMakeLists.txt
  44. +0 −2 examples/555/Makefile.am
  45. +21 −0 examples/CMakeLists.txt
  46. +0 −3 examples/Makefile.am
  47. +22 −0 examples/basic/CMakeLists.txt
  48. +0 −4 examples/basic/Makefile.am
  49. +16 −0 examples/diodes/CMakeLists.txt
  50. +0 −2 examples/diodes/Makefile.am
  51. +15 −0 examples/jfets/CMakeLists.txt
  52. +0 −2 examples/jfets/Makefile.am
  53. +19 −0 examples/mosfets/CMakeLists.txt
  54. +0 −2 examples/mosfets/Makefile.am
  55. +18 −0 examples/opamps/CMakeLists.txt
  56. +0 −2 examples/opamps/Makefile.am
  57. +20 −0 examples/transistors/CMakeLists.txt
  58. +0 −3 examples/transistors/Makefile.am
  59. +20 −0 icons/CMakeLists.txt
  60. +0 −6 icons/Makefile.am
  61. +120 −0 icons/pics/CMakeLists.txt
  62. +0 −19 icons/pics/Makefile.am
  63. +0 −288 ktechlab.kdevelop
  64. +45 −0 microbe/CMakeLists.txt
  65. +0 −10 microbe/Makefile.am
  66. +11 −0 po/CMakeLists.txt
  67. +0 −1 po/Makefile.am
  68. +196 −0 src/CMakeLists.txt
  69. +0 −92 src/Makefile.am
  70. +27 −0 src/contexthelp/CMakeLists.txt
  71. +0 −4 src/contexthelp/Makefile.am
  72. +34 −0 src/core/CMakeLists.txt
  73. +0 −6 src/core/Makefile.am
  74. +32 −0 src/drawparts/CMakeLists.txt
  75. +0 −7 src/drawparts/Makefile.am
  76. +59 −0 src/electronics/CMakeLists.txt
  77. +0 −19 src/electronics/Makefile.am
  78. +116 −0 src/electronics/components/CMakeLists.txt
  79. +0 −36 src/electronics/components/Makefile.am
  80. +15 −0 src/electronics/models/CMakeLists.txt
  81. +0 −2 src/electronics/models/Makefile.am
  82. +57 −0 src/electronics/simulation/CMakeLists.txt
  83. +0 −12 src/electronics/simulation/Makefile.am
  84. +59 −0 src/flowparts/CMakeLists.txt
  85. +0 −15 src/flowparts/Makefile.am
  86. +101 −0 src/gui/CMakeLists.txt
  87. +0 −26 src/gui/Makefile.am
  88. +47 −0 src/gui/itemeditor/CMakeLists.txt
  89. +0 −17 src/gui/itemeditor/Makefile.am
  90. +48 −0 src/languages/CMakeLists.txt
  91. +0 −14 src/languages/Makefile.am
  92. +39 −0 src/math/CMakeLists.txt
  93. +0 −17 src/math/Makefile.am
  94. +34 −0 src/mechanics/CMakeLists.txt
  95. +0 −8 src/mechanics/Makefile.am
  96. +35 −0 src/micro/CMakeLists.txt
  97. +0 −7 src/micro/Makefile.am
  98. +1 −1 src/microsettings.cpp
  99. +1 −1 src/oscilloscopedata.cpp
  100. 0 stamp-h.in
  101. +0 −6 subdirs
View
41 CMakeLists.txt
@@ -0,0 +1,41 @@
+project( ktechlab )
+set( VERSION 0.3.6 )
+
+find_package(KDE3 REQUIRED)
+include( ${CMAKE_SOURCE_DIR}/cmake/modules/FindGLIB.cmake )
+include( ${CMAKE_SOURCE_DIR}/cmake/modules/FindGPSim.cmake )
+
+#set(CMAKE_VERBOSE_MAKEFILE ON)
+
+set( CMAKE_REQUIRED_FLAGS
+ -fexceptions
+ )
+add_definitions(${QT_DEFINITIONS} ${KDE3_DEFINITIONS} ${GLIB2_DEFINITIONS})
+
+link_directories(${KDE3_LIB_DIR})
+
+include_directories(${CMAKE_CURRENT_SOURCE_DIR} ${CMAKE_CURRENT_BINARY_DIR}
+ ${KDE3_INCLUDE_DIR} ${QT_INCLUDE_DIR} ${GLIB2_INCLUDE_DIRS} )
+
+CONFIGURE_FILE( ${CMAKE_SOURCE_DIR}/config.h.cmake
+ ${CMAKE_BINARY_DIR}/config.h )
+
+add_subdirectory( microbe )
+add_subdirectory( src )
+add_subdirectory( examples )
+add_subdirectory( icons )
+add_subdirectory( po )
+add_subdirectory( doc )
+
+########### install files ###############
+
+
+
+
+#original Makefile.am contents follow:
+
+#AUTOMAKE_OPTIONS = foreign 1.5
+#
+#include admin/deps.am
+#
+#SUBDIRS=$(TOPSUBDIRS)
View
249 Doxyfile
@@ -1,249 +0,0 @@
-# Doxyfile 1.4.1-KDevelop
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-PROJECT_NAME = ktechlab
-PROJECT_NUMBER = 0.2
-OUTPUT_DIRECTORY =
-CREATE_SUBDIRS = NO
-OUTPUT_LANGUAGE = English
-USE_WINDOWS_ENCODING = NO
-BRIEF_MEMBER_DESC = YES
-REPEAT_BRIEF = YES
-ABBREVIATE_BRIEF =
-ALWAYS_DETAILED_SEC = NO
-INLINE_INHERITED_MEMB = NO
-FULL_PATH_NAMES = NO
-STRIP_FROM_PATH =
-STRIP_FROM_INC_PATH =
-SHORT_NAMES = NO
-JAVADOC_AUTOBRIEF = NO
-MULTILINE_CPP_IS_BRIEF = NO
-DETAILS_AT_TOP = NO
-INHERIT_DOCS = YES
-DISTRIBUTE_GROUP_DOC = NO
-TAB_SIZE = 8
-ALIASES =
-OPTIMIZE_OUTPUT_FOR_C = NO
-OPTIMIZE_OUTPUT_JAVA = NO
-SUBGROUPING = YES
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-EXTRACT_ALL = NO
-EXTRACT_PRIVATE = NO
-EXTRACT_STATIC = NO
-EXTRACT_LOCAL_CLASSES = YES
-EXTRACT_LOCAL_METHODS = NO
-HIDE_UNDOC_MEMBERS = NO
-HIDE_UNDOC_CLASSES = NO
-HIDE_FRIEND_COMPOUNDS = NO
-HIDE_IN_BODY_DOCS = NO
-INTERNAL_DOCS = NO
-CASE_SENSE_NAMES = YES
-HIDE_SCOPE_NAMES = NO
-SHOW_INCLUDE_FILES = YES
-INLINE_INFO = YES
-SORT_MEMBER_DOCS = YES
-SORT_BRIEF_DOCS = NO
-SORT_BY_SCOPE_NAME = NO
-GENERATE_TODOLIST = YES
-GENERATE_TESTLIST = YES
-GENERATE_BUGLIST = YES
-GENERATE_DEPRECATEDLIST= YES
-ENABLED_SECTIONS =
-MAX_INITIALIZER_LINES = 30
-SHOW_USED_FILES = YES
-SHOW_DIRECTORIES = YES
-FILE_VERSION_FILTER =
-#---------------------------------------------------------------------------
-# configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-QUIET = NO
-WARNINGS = YES
-WARN_IF_UNDOCUMENTED = YES
-WARN_IF_DOC_ERROR = YES
-WARN_NO_PARAMDOC = NO
-WARN_FORMAT = "$file:$line: $text"
-WARN_LOGFILE =
-#---------------------------------------------------------------------------
-# configuration options related to the input files
-#---------------------------------------------------------------------------
-INPUT = /home/david/devel/svn.ktechlab.org/src
-FILE_PATTERNS = *.c \
- *.cc \
- *.cxx \
- *.cpp \
- *.c++ \
- *.java \
- *.ii \
- *.ixx \
- *.ipp \
- *.i++ \
- *.inl \
- *.h \
- *.hh \
- *.hxx \
- *.hpp \
- *.h++ \
- *.idl \
- *.odl \
- *.cs \
- *.php \
- *.php3 \
- *.inc \
- *.C \
- *.H \
- *.tlh \
- *.diff \
- *.patch \
- *.moc \
- *.xpm \
- *.dox
-RECURSIVE = YES
-EXCLUDE =
-EXCLUDE_SYMLINKS = NO
-EXCLUDE_PATTERNS =
-EXAMPLE_PATH =
-EXAMPLE_PATTERNS = *
-EXAMPLE_RECURSIVE = NO
-IMAGE_PATH =
-INPUT_FILTER =
-FILTER_PATTERNS =
-FILTER_SOURCE_FILES = NO
-#---------------------------------------------------------------------------
-# configuration options related to source browsing
-#---------------------------------------------------------------------------
-SOURCE_BROWSER = YES
-INLINE_SOURCES = NO
-STRIP_CODE_COMMENTS = YES
-REFERENCED_BY_RELATION = YES
-REFERENCES_RELATION = YES
-VERBATIM_HEADERS = YES
-#---------------------------------------------------------------------------
-# configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-ALPHABETICAL_INDEX = NO
-COLS_IN_ALPHA_INDEX = 5
-IGNORE_PREFIX =
-#---------------------------------------------------------------------------
-# configuration options related to the HTML output
-#---------------------------------------------------------------------------
-GENERATE_HTML = YES
-HTML_OUTPUT = html
-HTML_FILE_EXTENSION = .php
-HTML_HEADER = /home/david/devel/svn.ktechlab.org/templates/doxygen-header.php
-HTML_FOOTER = /home/david/devel/svn.ktechlab.org//templates/doxygen-footer.php
-HTML_STYLESHEET =
-HTML_ALIGN_MEMBERS = YES
-GENERATE_HTMLHELP = NO
-CHM_FILE =
-HHC_LOCATION =
-GENERATE_CHI = NO
-BINARY_TOC = NO
-TOC_EXPAND = NO
-DISABLE_INDEX = NO
-ENUM_VALUES_PER_LINE = 4
-GENERATE_TREEVIEW = NO
-TREEVIEW_WIDTH = 250
-#---------------------------------------------------------------------------
-# configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-GENERATE_LATEX = NO
-LATEX_OUTPUT = latex
-LATEX_CMD_NAME = latex
-MAKEINDEX_CMD_NAME = makeindex
-COMPACT_LATEX = NO
-PAPER_TYPE = a4wide
-EXTRA_PACKAGES =
-LATEX_HEADER =
-PDF_HYPERLINKS = NO
-USE_PDFLATEX = NO
-LATEX_BATCHMODE = NO
-LATEX_HIDE_INDICES = NO
-#---------------------------------------------------------------------------
-# configuration options related to the RTF output
-#---------------------------------------------------------------------------
-GENERATE_RTF = NO
-RTF_OUTPUT = rtf
-COMPACT_RTF = NO
-RTF_HYPERLINKS = NO
-RTF_STYLESHEET_FILE =
-RTF_EXTENSIONS_FILE =
-#---------------------------------------------------------------------------
-# configuration options related to the man page output
-#---------------------------------------------------------------------------
-GENERATE_MAN = NO
-MAN_OUTPUT = man
-MAN_EXTENSION = .3
-MAN_LINKS = NO
-#---------------------------------------------------------------------------
-# configuration options related to the XML output
-#---------------------------------------------------------------------------
-GENERATE_XML = NO
-XML_OUTPUT = xml
-XML_SCHEMA =
-XML_DTD =
-XML_PROGRAMLISTING = YES
-#---------------------------------------------------------------------------
-# configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-GENERATE_AUTOGEN_DEF = NO
-#---------------------------------------------------------------------------
-# configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-GENERATE_PERLMOD = NO
-PERLMOD_LATEX = NO
-PERLMOD_PRETTY = YES
-PERLMOD_MAKEVAR_PREFIX =
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-ENABLE_PREPROCESSING = YES
-MACRO_EXPANSION = NO
-EXPAND_ONLY_PREDEF = NO
-SEARCH_INCLUDES = YES
-INCLUDE_PATH =
-INCLUDE_FILE_PATTERNS =
-PREDEFINED =
-EXPAND_AS_DEFINED =
-SKIP_FUNCTION_MACROS = YES
-#---------------------------------------------------------------------------
-# Configuration::additions related to external references
-#---------------------------------------------------------------------------
-TAGFILES =
-GENERATE_TAGFILE =
-ALLEXTERNALS = NO
-EXTERNAL_GROUPS = YES
-PERL_PATH = /usr/bin/perl
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-CLASS_DIAGRAMS = YES
-HIDE_UNDOC_RELATIONS = YES
-HAVE_DOT = NO
-CLASS_GRAPH = YES
-COLLABORATION_GRAPH = YES
-GROUP_GRAPHS = YES
-UML_LOOK = NO
-TEMPLATE_RELATIONS = NO
-INCLUDE_GRAPH = YES
-INCLUDED_BY_GRAPH = YES
-CALL_GRAPH = NO
-GRAPHICAL_HIERARCHY = YES
-DIRECTORY_GRAPH = YES
-DOT_IMAGE_FORMAT = png
-DOT_PATH =
-DOTFILE_DIRS =
-MAX_DOT_GRAPH_WIDTH = 1024
-MAX_DOT_GRAPH_HEIGHT = 1024
-MAX_DOT_GRAPH_DEPTH = 1000
-DOT_TRANSPARENT = NO
-DOT_MULTI_TARGETS = NO
-GENERATE_LEGEND = YES
-DOT_CLEANUP = YES
-#---------------------------------------------------------------------------
-# Configuration::additions related to the search engine
-#---------------------------------------------------------------------------
-SEARCHENGINE = YES
View
163 INSTALL
@@ -3,165 +3,56 @@ Basic Installation
These are generic installation instructions.
- The `configure' shell script attempts to guess correct values for
-various system-dependent variables used during compilation. It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions. Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, a file
-`config.cache' that saves the results of its tests to speed up
-reconfiguring, and a file `config.log' containing compiler output
-(useful mainly for debugging `configure').
+cmake doesn't produce any output into the source directory, by default.
+Instead it uses extra build directories for that. (This makes the
+make clean procedure obsolete, because you only have to remove the build dir)
- If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
-be considered for the next release. If at some point `config.cache'
-contains results you don't want to keep, you may remove or edit it.
+To compile this project, simply create a build dir:
- The file `configure.in' is used to create `configure' by a program
-called `autoconf'. You only need `configure.in' if you want to change
-it or regenerate `configure' using a newer version of `autoconf'.
+mkdir build
-The simplest way to compile this package is:
+#cd into the build dir
+cd build
- 1. `cd' to the directory containing the package's source code and type
- `./configure' to configure the package for your system. If you're
- using `csh' on an old version of System V, you might need to type
- `sh ./configure' instead to prevent `csh' from trying to execute
- `configure' itself.
+#run cmake to do the "configure magic"
+#(yes, the two dots point to the source dir)
+cmake ..
- Running `configure' takes a while. While running, it prints some
- messages telling which features it is checking for.
+#make
+make
- 2. Type `make' to compile the package.
+#and make install
+make install
- 3. Type `make install' to install the programs and any data files and
- documentation.
-
- 4. You can remove the program binaries and object files from the
- source code directory by typing `make clean'.
Compilers and Options
=====================
- Some systems require unusual options for compilation or linking that
-the `configure' script does not know about. You can give `configure'
-initial values for variables by setting them in the environment. Using
-a Bourne-compatible shell, you can do that on the command line like
-this:
- CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
-
-Or on systems that have the `env' program, you can do it like this:
- env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
-
-Compiling For Multiple Architectures
-====================================
-
- You can compile the package for more than one kind of computer at the
-same time, by placing the object files for each architecture in their
-own directory. To do this, you must use a version of `make' that
-supports the `VPATH' variable, such as GNU `make'. `cd' to the
-directory where you want the object files and executables to go and run
-the `configure' script. `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.
-
- If you have to use a `make' that does not supports the `VPATH'
-variable, you have to compile the package for one architecture at a time
-in the source code directory. After you have installed the package for
-one architecture, use `make distclean' before reconfiguring for another
-architecture.
+Compiler options can be set via ccmake or directly as a command-line option
+for cmake. The most easy way would be to use ccmake.
+
+To compile in debug symbols use:
+
+cmake -DCMAKE_BUILD_TYPE=debug ..
Installation Names
==================
By default, `make install' will install the package's files in
`/usr/local/bin', `/usr/local/man', etc. You can specify an
-installation prefix other than `/usr/local' by giving `configure' the
-option `--prefix=PATH'.
-
- You can specify separate installation prefixes for
-architecture-specific files and architecture-independent files. If you
-give `configure' the option `--exec-prefix=PATH', the package will use
-PATH as the prefix for installing programs and libraries.
-Documentation and other data files will still use the regular prefix.
-
- If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+installation prefix other than `/usr/local' by giving `cmake' the
+option `-DCMAKE_INSTALL_PREFIX=PATH'.
Optional Features
=================
- Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System). The
-`README' should mention any `--enable-' and `--with-' options that the
-package recognizes.
-
- For packages that use the X Window System, `configure' can usually
-find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
-
-Specifying the System Type
-==========================
-
- There may be some features `configure' can not figure out
-automatically, but needs to determine by the type of host the package
-will run on. Usually `configure' can figure that out, but if it prints
-a message saying it can not guess the host type, give it the
-`--host=TYPE' option. TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name with three fields:
- CPU-COMPANY-SYSTEM
-
-See the file `config.sub' for the possible values of each field. If
-`config.sub' isn't included in this package, then this package doesn't
-need to know the host type.
-
- If you are building compiler tools for cross-compiling, you can also
-use the `--target=TYPE' option to select the type of system they will
-produce code for and the `--build=TYPE' option to select the type of
-system on which you are compiling the package.
-
-Sharing Defaults
-================
-
- If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists. Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
+{TODO}
Operation Controls
==================
- `configure' recognizes the following options to control how it
-operates.
-
-`--cache-file=FILE'
- Use and save the results of the tests in FILE instead of
- `./config.cache'. Set FILE to `/dev/null' to disable caching, for
- debugging `configure'.
-
-`--help'
- Print a summary of the options to `configure', and exit.
-
-`--quiet'
-`--silent'
-`-q'
- Do not print messages saying which checks are being made.
-
-`--srcdir=DIR'
- Look for the package's source code in directory DIR. Usually
- `configure' can determine that directory automatically.
-
-`--version'
- Print the version of Autoconf used to generate the `configure'
- script, and exit.
-
-`configure' also accepts some other, not widely useful, options.
+Some interesting cmake variables include:
+ -DCMAKE_VERBOSE_MAKEFILE=ON
+ This makes cmake to create verbose Makefiles to see options given
+ to gcc and friends
View
5 Makefile.am
@@ -1,5 +0,0 @@
-AUTOMAKE_OPTIONS = foreign 1.5
-
-include admin/deps.am
-
-SUBDIRS=$(TOPSUBDIRS)
View
10 Makefile.cvs
@@ -1,10 +0,0 @@
-all:
- @echo "This Makefile is only for the CVS repository"
- @echo "This will be deleted before making the distribution"
- @echo ""
- $(MAKE) -f admin/Makefile.common cvs
-
-dist:
- $(MAKE) -f admin/Makefile.common dist
-
-.SILENT:
View
102 admin/Doxyfile.am
@@ -1,102 +0,0 @@
-## generate API documentation with doxygen
-apidox-am-yes:
- @if test \! -d "$(top_srcdir)/doc/common/" && test -z "$$DOXDATA" ; then \
- export DOXDATA=$(kde_libs_htmldir)/en/common ; \
- fi ; \
- abs_top_srcdir=`cd $(top_srcdir) && pwd` ;\
- test -d $(top_builddir)/apidocs || \
- ( cd $(top_builddir) && sh $$abs_top_srcdir/admin/doxygen.sh \
- --no-modulename --installdir=$(kde_libs_htmldir)/en \
- --no-recurse $(abs_top_srcdir) . ) ; \
- cd $(top_builddir) && sh $$abs_top_srcdir/admin/doxygen.sh \
- --recurse --no-modulename --installdir=$(kde_libs_htmldir)/en \
- $$abs_top_srcdir $(subdir)
-
-apidox-am-toplevel-yes:
- @if test \! -d "$(top_srcdir)/doc/common/" && test -z "$$ADMIN" ; then \
- export DOXDATA=$(kde_libs_htmldir)/en/common ; \
- fi ; \
- abs_top_srcdir=`cd $(top_srcdir) && pwd` ;\
- cd $(top_builddir) && sh $$abs_top_srcdir/admin/doxygen.sh \
- --no-modulename --installdir=$(kde_libs_htmldir)/en \
- $$abs_top_srcdir
-
-## Don't generate API documentation without doxygen
-apidox-am-no:
-
-apidox-am-toplevel-no:
-
-
-apidox:
- @if test "$(subdir)" != "."; then \
- $(MAKE) apidox-am-@KDE_HAS_DOXYGEN@ ;\
- else \
- $(MAKE) apidox-am-toplevel-@KDE_HAS_DOXYGEN@ ;\
- fi
-
-
-
-install-data-local: install-apidox
-
-## install API documentation
-install-apidox:
- @if test "$(subdir)" != "."; then \
- $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir)/html ; \
- if test -f $(top_builddir)/apidocs/$(subdir)/$(subdir).tag; then \
- echo $(INSTALL_DATA) $(top_builddir)/apidocs/$(subdir)/$(subdir).tag $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir); \
- $(INSTALL_DATA) $(top_builddir)/apidocs/$(subdir)/$(subdir).tag $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir); \
- fi; \
- if test -d $(top_builddir)/apidocs/$(subdir)/html; then \
- list=`ls $(top_builddir)/apidocs/$(subdir)/html`; \
- echo "installing $(top_builddir)/apidocs/$(subdir)/html" ;\
- for file in $$list; do \
- $(INSTALL_DATA) $(top_builddir)/apidocs/$(subdir)/html/$$file $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir)/html; \
- done; \
- fi; \
- else\
- if test -d $(top_builddir)/apidocs; then \
- $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs ;\
- list=`cd $(top_builddir)/apidocs && ls -1`; \
- echo "installing $(top_builddir)/apidocs/$$file" ;\
- echo "target directory $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs" ; \
- for file in $$list; do \
- if test -f $(top_builddir)/apidocs/$$file; then \
- $(INSTALL_DATA) $(top_builddir)/apidocs/$$file $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs; \
- fi; \
- done ; fi; \
- fi
-
-uninstall-local: uninstall-apidox
-
-## uninstall API documentation
-uninstall-apidox:
- @if test "$(subdir)" != "."; then \
- if test -d $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir); then \
- rm -rfv $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir); \
- fi \
- else \
- if test -d $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs; then \
- rm -rfv $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs; \
- fi \
- fi
-
-install-apidox-recurse: install-apidox
- @set fnord $(MAKEFLAGS); amf=$$2; if test -n '$(SUBDIRS)'; then \
- list='$(SUBDIRS)'; \
- for subdir in $$list; do \
- if grep '^include .*Doxyfile.am' $(srcdir)/$$subdir/Makefile.am > /dev/null ; then \
- echo "Installing apidox from $$subdir"; \
- if test "$$subdir" != "."; then \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) GENERATE_FLAG=no install-apidox-recurse) || exit 1; \
- fi ; fi ;\
- done; \
- fi
-
-
-
-.PHONY: apidox-am-yes apidox-am-no install-data-local install-apidox install-apidox uninstall-local uninstall-apidox uninstall-apidox apidox apidox-am-toplevel-no apidox-am-toplevel-yes
-
-
-# Local Variables:
-# mode: makefile
-# End:
View
192 admin/Doxyfile.global
@@ -1,192 +0,0 @@
-OUTPUT_LANGUAGE = English
-USE_WINDOWS_ENCODING = NO
-BRIEF_MEMBER_DESC = NO
-REPEAT_BRIEF = YES
-ABBREVIATE_BRIEF =
-ALWAYS_DETAILED_SEC = YES
-INLINE_INHERITED_MEMB = NO
-FULL_PATH_NAMES = NO
-STRIP_FROM_PATH =
-SHORT_NAMES = NO
-JAVADOC_AUTOBRIEF = YES
-MULTILINE_CPP_IS_BRIEF = NO
-INHERIT_DOCS = YES
-DISTRIBUTE_GROUP_DOC = NO
-TAB_SIZE = 4
-OPTIMIZE_OUTPUT_FOR_C = NO
-OPTIMIZE_OUTPUT_JAVA = NO
-SUBGROUPING = YES
-EXTRACT_ALL = NO
-EXTRACT_PRIVATE = NO
-EXTRACT_STATIC = YES
-EXTRACT_LOCAL_CLASSES = NO
-HIDE_UNDOC_MEMBERS = NO
-HIDE_UNDOC_CLASSES = YES
-HIDE_FRIEND_COMPOUNDS = NO
-HIDE_IN_BODY_DOCS = NO
-INTERNAL_DOCS = NO
-CASE_SENSE_NAMES = YES
-HIDE_SCOPE_NAMES = NO
-SHOW_INCLUDE_FILES = YES
-INLINE_INFO = YES
-SORT_BRIEF_DOCS = NO
-SORT_BY_SCOPE_NAME = NO
-GENERATE_TESTLIST = NO
-GENERATE_BUGLIST = YES
-GENERATE_DEPRECATEDLIST= YES
-ENABLED_SECTIONS =
-MAX_INITIALIZER_LINES = 30
-SHOW_USED_FILES = YES
-QUIET = YES
-WARNINGS = NO
-WARN_IF_UNDOCUMENTED = NO
-WARN_IF_DOC_ERROR = YES
-WARN_FORMAT =
-WARN_LOGFILE =
-INPUT =
-FILE_PATTERNS = *.h \
- *.cpp \
- *.cc \
- *.hpp \
- *.dox \
- *.c++ \
- *.cxx \
- *.h++ \
- *.hh
-RECURSIVE = YES
-EXCLUDE =
-EXCLUDE_SYMLINKS = NO
-EXCLUDE_PATTERNS = *.moc.* \
- moc* \
- *.all_cpp.* \
- *unload.* \
- */test/* \
- */tests/* \
- *_p.h
-EXAMPLE_PATH =
-EXAMPLE_PATTERNS =
-EXAMPLE_RECURSIVE = NO
-IMAGE_PATH =
-INPUT_FILTER =
-FILTER_SOURCE_FILES = NO
-SOURCE_BROWSER = YES
-INLINE_SOURCES = NO
-STRIP_CODE_COMMENTS = YES
-REFERENCED_BY_RELATION = YES
-REFERENCES_RELATION = YES
-VERBATIM_HEADERS = YES
-ALPHABETICAL_INDEX = YES
-COLS_IN_ALPHA_INDEX = 3
-HTML_OUTPUT =
-HTML_FILE_EXTENSION = .html
-HTML_HEADER = ../apidocs/common/header.html
-HTML_FOOTER = ../apidocs/common/footer.html
-HTML_STYLESHEET = ../apidocs/common/doxygen.css
-HTML_ALIGN_MEMBERS = YES
-GENERATE_HTMLHELP = NO
-CHM_FILE =
-HHC_LOCATION =
-GENERATE_CHI = NO
-BINARY_TOC = NO
-TOC_EXPAND = NO
-DISABLE_INDEX = YES
-ENUM_VALUES_PER_LINE = 4
-GENERATE_TREEVIEW = NO
-TREEVIEW_WIDTH = 250
-GENERATE_LATEX = NO
-LATEX_OUTPUT =
-LATEX_CMD_NAME = latex
-MAKEINDEX_CMD_NAME = makeindex
-COMPACT_LATEX = NO
-PAPER_TYPE = a4wide
-EXTRA_PACKAGES =
-LATEX_HEADER =
-PDF_HYPERLINKS = NO
-USE_PDFLATEX = NO
-LATEX_BATCHMODE = NO
-LATEX_HIDE_INDICES = NO
-GENERATE_RTF = NO
-RTF_OUTPUT =
-COMPACT_RTF = NO
-RTF_HYPERLINKS = NO
-RTF_STYLESHEET_FILE =
-RTF_EXTENSIONS_FILE =
-GENERATE_MAN = NO
-MAN_OUTPUT =
-MAN_EXTENSION = .kde3
-MAN_LINKS = YES
-GENERATE_XML = NO
-XML_OUTPUT = xml
-XML_SCHEMA =
-XML_DTD =
-XML_PROGRAMLISTING = NO
-GENERATE_AUTOGEN_DEF = NO
-GENERATE_PERLMOD = NO
-PERLMOD_LATEX = NO
-PERLMOD_PRETTY = YES
-PERLMOD_MAKEVAR_PREFIX =
-ENABLE_PREPROCESSING = YES
-SEARCH_INCLUDES = YES
-INCLUDE_PATH =
-INCLUDE_FILE_PATTERNS =
-PREDEFINED = QT_VERSION=320 \
- __cplusplus \
- Q_WS_X11
-EXPAND_AS_DEFINED =
-SKIP_FUNCTION_MACROS = YES
-TAGFILES =
-GENERATE_TAGFILE =
-ALLEXTERNALS = NO
-EXTERNAL_GROUPS = NO
-PERL_PATH =
-CLASS_DIAGRAMS = YES
-HIDE_UNDOC_RELATIONS = NO
-HAVE_DOT = NO
-UML_LOOK = NO
-TEMPLATE_RELATIONS = YES
-INCLUDE_GRAPH = YES
-INCLUDED_BY_GRAPH = YES
-CALL_GRAPH = NO
-GRAPHICAL_HIERARCHY = YES
-DOT_IMAGE_FORMAT = png
-DOT_PATH =
-DOTFILE_DIRS =
-MAX_DOT_GRAPH_WIDTH = 800
-MAX_DOT_GRAPH_HEIGHT = 1024
-MAX_DOT_GRAPH_DEPTH = 0
-GENERATE_LEGEND = YES
-DOT_CLEANUP = YES
-SEARCHENGINE = NO
-
-### KDE Settings
-ALIASES = \
- "intern=\par<b>Internal use only.</b>" \
- "reimp=\par<b>Reimplemented from superclass.</b>" \
- "obsolete=@deprecated" \
- "feature=\xrefitem features \"Feature(s)\" \"Features\"" \
- "maintainer=\xrefitem maintainers \"Maintainer(s)\" \"Maintainers\"" \
- "unmaintained=\xrefitem unmaintained \"Unmaintained\" \"Unmaintained\"" \
- "requirement=\xrefitem requirements \"Requirement(s)\" \"Requirements\"" \
- "faq=\xrefitem FAQ \"F.A.Q.\" \"F.A.Q.\"" \
- "authors=\xrefitem authors \"Author(s)\" \"Authors\"" \
- "FIXME=\xrefitem fixme \"Fixme\" \"Fixme\""
-
-HTML_ALIGN_MEMBERS = YES
-REFERENCED_BY_RELATION = NO
-REFERENCES_RELATION = NO
-VERBATIM_HEADERS = NO
-GENERATE_HTML = YES
-SOURCE_BROWSER = YES
-GENERATE_AUTOGEN_DEF = NO
-DETAILS_AT_TOP = YES
-SORT_MEMBER_DOCS = YES
-GENERATE_TODOLIST = YES
-IGNORE_PREFIX = K
-GENERATE_HTML = YES
-CLASS_GRAPH = YES
-COLLABORATION_GRAPH = NO
-
-
-MACRO_EXPANSION = YES
-EXPAND_ONLY_PREDEF = YES
-
View
37 admin/Makefile.common
@@ -1,37 +0,0 @@
-### Makefile.common
-###
-### Copyright (C) 2002 by the KDE developers
-
-### All the real work is done by the shellscript cvs.sh
-
-SHELL=/bin/sh
-
-cvs dist configure configure.in configure.files subdirs package-messages package-merge Makefile.am acinclude.m4 extract-messages:
- @admindir=$(admindir); \
- if test "x$$admindir" = x; then \
- admindir=.; until test -f $$admindir/admin/cvs.sh; do \
- admindir=$$admindir/..; \
- if test `cd $$admindir && pwd` = / ; then break; fi; \
- done; \
- admindir=$$admindir/admin; \
- if test -f $$admindir/cvs.sh; then :; else \
- echo "Can't find the admin/ directory in any parent of the"; \
- echo "current directory. Please set it with admindir=..."; \
- exit 1; \
- fi; \
- fi; \
- if test "$@" = "package-merge"; then \
- MAKE="$(MAKE)" POFILES="$(POFILES)" PACKAGE="$(PACKAGE)" \
- $(SHELL) $$admindir/cvs.sh package-merge ;\
- else \
- MAKE="$(MAKE)" $(SHELL) $$admindir/cvs.sh $@ ;\
- fi
-
-configure.in: configure.files subdirs
-configure.files: subdirs
-
-svn: cvs
-
-.SILENT:
-
-.PHONY: svn cvs dist package-merge package-messages
View
5,973 admin/acinclude.m4.in
0 additions, 5,973 deletions not shown because the diff is too large. Please use a local Git client to view these changes.
View
2,445 admin/am_edit
0 additions, 2,445 deletions not shown because the diff is too large. Please use a local Git client to view these changes.
View
157 admin/bcheck.pl
@@ -1,157 +0,0 @@
-#!/usr/bin/perl -w
-
-use DB_File;
-use Fcntl ':flock';
-
-if (!defined($ARGV[0])) {
- print "usage: requires .class dump as parameter!\n";
- exit;
-}
-
-sub bailout
-{
- untie %bcheckdb if(defined(%bcheckdb));
-
- if(defined(MYLOCK)) {
- flock MYLOCK, LOCK_UN;
- close(MYLOCK);
- }
-
- print @_;
- exit 5;
-}
-
-sub ask_user
-{
- my ($dbkey, $dbchunk) = @_;
-
- if (defined($ENV{"BCHECK_UPDATE"})) {
- $bcheckdb{$dbkey} = $dbchunk;
- return;
- }
-
- &bailout("BC problem detected") if (! -t STDIN);
-
- print "(I)gnore / (Q)uit / (U)pdate: ";
-
- my $key;
- while(defined(read STDIN, $key, 1)) {
- $key = lc($key);
-
- print "got: >$key<\n";
-
- return if ($key eq 'i');
-
- &bailout("BC problem. aborted") if ($key eq 'q');
-
- if ($key eq 'u') {
- $bcheckdb{$dbkey} = $dbchunk;
- return;
- }
- print "\n(I)gnore / (Q)uit / (U)pdate: ";
- }
-}
-
-sub diff_chunk($$)
-{
- my ($oldl, $newl) = @_;
- my @old = split /^/m, $oldl;
- my @new = split /^/m, $newl;
- my $haschanges = 0;
- my $max = $#old > $#new ? $#old : $#new;
-
- die "whoops. key different" if ($old[0] ne $new[0]);
-
- if ($#old != $#new) {
- warn ("Structural difference.\n");
- print @old;
- print "-----------------------------------------------\n";
- print @new;
- $haschanges = 1;
- return $haschanges;
- }
-
- print $old[0];
-
- my ($class) = ($old[0] =~ /^(?:Class |Vtable for )(\S+)/);
-
- my $c = 1;
- while ($c < $max) {
- my ($o, $n) = ($old[$c], $new[$c]);
- chomp $o;
- chomp $n;
- $c++;
- next if ($o eq $n);
-
- if(defined($class) and $n =~ /^(\d+\s+)\w+(::\S+\s*.*)$/) {
- next if ($n eq "$1$class$2");
- }
-
- $haschanges = 1;
-
- print "-$o\n+$n\n\n";
- }
-
- return $haschanges;
-}
-
-local $dblock = $ENV{"HOME"} . "/bcheck.lock";
-my $dbfile = $ENV{"HOME"} . "/bcheck.db";
-my $cdump = $ARGV[0];
-
-die "file $cdump is not readable: $!" if (! -f $cdump);
-
-# make sure the advisory lock exists
-open(MYLOCK, ">$dblock");
-print MYLOCK "";
-
-flock MYLOCK, LOCK_EX;
-
-tie %bcheckdb, 'DB_File', $dbfile;
-
-my $chunk = "";
-
-open (IN, "<$cdump") or die "cannot open $cdump: $!";
-while (<IN>) {
-
- chop;
-
- s/0x[0-9a-fA-F]+/0x......../g;
- s/base size=/size=/g;
- s/\(\)\s*$//g;
- s/base align=/align=/g;
-
- $chunk .= $_ . "\n";
-
- if(/^\s*$/) {
- my @lines = split /^/m, $chunk;
- my $key = $lines[0];
- chomp $key;
-
- if($key !~ /<anonymous struct>/ &&
- $key !~ /<anonymous union>/) {
- if(defined($bcheckdb{$key})) {
- my $dbversion = $bcheckdb{$key};
-
- if($dbversion ne $chunk) {
- &ask_user($key, $chunk) if(&diff_chunk($dbversion, $chunk));
- }
- }
- else {
- $bcheckdb{$key} = $chunk;
- print "NEW: $key\n";
- }
- }
-
- $chunk = "";
- next;
- }
-
-}
-close(IN);
-
-untie %bcheckdb;
-flock MYLOCK, LOCK_UN;
-close(MYLOCK);
-
-exit 0;
View
142 admin/compile
@@ -1,142 +0,0 @@
-#! /bin/sh
-# Wrapper for compilers which do not understand `-c -o'.
-
-scriptversion=2005-05-14.22
-
-# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
-# Written by Tom Tromey <tromey@cygnus.com>.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# This file is maintained in Automake, please report
-# bugs to <bug-automake@gnu.org> or send patches to
-# <automake-patches@gnu.org>.
-
-case $1 in
- '')
- echo "$0: No command. Try \`$0 --help' for more information." 1>&2
- exit 1;
- ;;
- -h | --h*)
- cat <<\EOF
-Usage: compile [--help] [--version] PROGRAM [ARGS]
-
-Wrapper for compilers which do not understand `-c -o'.
-Remove `-o dest.o' from ARGS, run PROGRAM with the remaining
-arguments, and rename the output as expected.
-
-If you are trying to build a whole package this is not the
-right script to run: please start by reading the file `INSTALL'.
-
-Report bugs to <bug-automake@gnu.org>.
-EOF
- exit $?
- ;;
- -v | --v*)
- echo "compile $scriptversion"
- exit $?
- ;;
-esac
-
-ofile=
-cfile=
-eat=
-
-for arg
-do
- if test -n "$eat"; then
- eat=
- else
- case $1 in
- -o)
- # configure might choose to run compile as `compile cc -o foo foo.c'.
- # So we strip `-o arg' only if arg is an object.
- eat=1
- case $2 in
- *.o | *.obj)
- ofile=$2
- ;;
- *)
- set x "$@" -o "$2"
- shift
- ;;
- esac
- ;;
- *.c)
- cfile=$1
- set x "$@" "$1"
- shift
- ;;
- *)
- set x "$@" "$1"
- shift
- ;;
- esac
- fi
- shift
-done
-
-if test -z "$ofile" || test -z "$cfile"; then
- # If no `-o' option was seen then we might have been invoked from a
- # pattern rule where we don't need one. That is ok -- this is a
- # normal compilation that the losing compiler can handle. If no
- # `.c' file was seen then we are probably linking. That is also
- # ok.
- exec "$@"
-fi
-
-# Name of file we expect compiler to create.
-cofile=`echo "$cfile" | sed -e 's|^.*/||' -e 's/\.c$/.o/'`
-
-# Create the lock directory.
-# Note: use `[/.-]' here to ensure that we don't use the same name
-# that we are using for the .o file. Also, base the name on the expected
-# object file name, since that is what matters with a parallel build.
-lockdir=`echo "$cofile" | sed -e 's|[/.-]|_|g'`.d
-while true; do
- if mkdir "$lockdir" >/dev/null 2>&1; then
- break
- fi
- sleep 1
-done
-# FIXME: race condition here if user kills between mkdir and trap.
-trap "rmdir '$lockdir'; exit 1" 1 2 15
-
-# Run the compile.
-"$@"
-ret=$?
-
-if test -f "$cofile"; then
- mv "$cofile" "$ofile"
-elif test -f "${cofile}bj"; then
- mv "${cofile}bj" "$ofile"
-fi
-
-rmdir "$lockdir"
-exit $ret
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End:
View
191 admin/conf.change.pl
@@ -1,191 +0,0 @@
-#!/usr/bin/env perl
-
-# this script patches a config.status file, to use our own perl script
-# in the main loop
-# we do it this way to circumvent hacking (and thereby including)
-# autoconf function (which are GPL) into our LGPL acinclude.m4.in
-# written by Michael Matz <matz@kde.org>
-# adapted by Dirk Mueller <mueller@kde.org>
-#
-# This file is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Library General Public
-# License as published by the Free Software Foundation; either
-# version 2 of the License, or (at your option) any later version.
-
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Library General Public License for more details.
-
-# You should have received a copy of the GNU Library General Public License
-# along with this library; see the file COPYING.LIB. If not, write to
-# the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
-# Boston, MA 02110-1301, USA.
-
-# we have to change two places
-# 1. the splitting of the substitutions into chunks of 90 (or even 48 in
-# later autoconf's
-# 2. the big main loop which patches all Makefile.in's
-
-use strict;
-use File::Basename;
-
-my $ac_aux_dir = dirname($0);
-my ($flag);
-my $ac_version = 0;
-my $vpath_seen = 0;
-$flag = 0;
-
-while (<>) {
-# usage of $flag: 0 -- we have seen nothing yet
-# 1 -- we are in (1)
-# 2 -- we have ended (1)
-# 3 -- we are in (2)
-# 4 -- we ended (2)
-
- if ($flag == 4) {
- print;
- } elsif ($flag == 0) {
-# 1. begins with (including): "ac_max_sed_\S+\s*=\s*[0-9]+..."
-# ends with (excluding) "CONFIG_FILE=..."
-# in later autoconf (2.14.1) there is no CONFIG_FILES= line,
-# but instead the (2) directly follow (1)
- if (/^\s*ac_max_sed_([a-z]+).*=\s*([0-9]+)/ ) {
- $flag = 1;
- if ($1 eq 'lines') {
- # lets hope its different with 2141,
- # wasn't able to verify that
- if ($2 eq '48') {
- $ac_version = 250;
- }
- else {
- $ac_version = 2141;
- }
- } elsif ($1 eq 'cmds') {
- $ac_version = 213;
- }
- # hmm, we don't know the autoconf version, but we try anyway
- } else {
- print;
- }
- } elsif ($flag == 1) {
- if (/^\s*CONFIG_FILES=/ && ($ac_version != 250)) {
- print;
- $flag = 2;
- } elsif (/^\s*for\s+ac_file\s+in\s+.*CONFIG_FILES/ ) {
- $flag = 3;
- }
- } elsif ($flag == 2) {
-# 2. begins with: "for ac_file in.*CONFIG_FILES" (the next 'for' after (1))
-# end with: "rm -f conftest.s\*"
-# on autoconf 250, it ends with '# CONFIG_HEADER section'
-#
-# gg: if a post-processing commands section is found first,
-# stop there and insert a new loop to honor the case/esac.
-# (pattern: /^\s+#\sRun the commands associated with the file./)
-
- if (/^\s*for\s+ac_file\s+in\s+.*CONFIG_FILES/ ) {
- $flag = 3;
- } else {
- print;
- }
- } elsif ($flag == 3) {
- if (/^\s*rm\s+-f\s+conftest/ ) {
- $flag = 4;
- &insert_main_loop();
- } elsif (/^\s*rm\s+-f\s+.*ac_cs_root/ ) {
- $flag = 4;
- &insert_main_loop();
- #die "hhhhhhh";
- if ($ac_version != 2141) {
- print STDERR "hmm, don't know autoconf version\n";
- }
- } elsif (/^\#\s*CONFIG_(HEADER|COMMANDS) section.*|^\s+#\s(Run) the commands associated/) {
- $flag = 4;
- my $commands = defined $2;
- &insert_main_loop();
- $commands && insert_command_loop();
- if($ac_version != 250) {
- print STDERR "hmm, something went wrong :-(\n";
- }
- } elsif (/VPATH/ ) {
- $vpath_seen = 1;
- }
- }
-}
-
-die "wrong input (flag != 4)" unless $flag == 4;
-print STDERR "hmm, don't know autoconf version\n" unless $ac_version;
-
-sub insert_main_loop {
-
- if ($ac_version == 250) {
- &insert_main_loop_250();
- }
- else {
- &insert_main_loop_213();
- }
-}
-
-sub insert_main_loop_250 {
-
- print <<EOF;
- #echo Doing the fast build of Makefiles -- autoconf $ac_version
-EOF
- if ($vpath_seen) {
- print <<EOF;
- # VPATH subst was seen in original config.status main loop
- echo '/^[ ]*VPATH[ ]*=[^:]*\$/d' >>\$tmp/subs.sed
-EOF
- }
- print <<EOF;
- rm -f \$tmp/subs.files
- for ac_file in .. \$CONFIG_FILES ; do
- if test "x\$ac_file" != x..; then
- echo \$ac_file >> \$tmp/subs.files
- fi
- done
- if test -f \$tmp/subs.files ; then
- perl $ac_aux_dir/config.pl "\$tmp/subs.sed" "\$tmp/subs.files" "\$srcdir" "\$INSTALL"
- fi
- rm -f \$tmp/subs.files
-
-fi
-EOF
- return;
-}
-
-sub insert_main_loop_213 {
- print <<EOF;
-#echo Doing the fast build of Makefiles -- autoconf $ac_version
-if test "x\$ac_cs_root" = "x" ; then
- ac_cs_root=conftest
-fi
-EOF
- if ($vpath_seen) {
- print <<EOF;
-# VPATH subst was seen in original config.status main loop
-echo '/^[ ]*VPATH[ ]*=[^:]*\$/d' >> \$ac_cs_root.subs
-EOF
- }
- print <<EOF;
-rm -f \$ac_cs_root.sacfiles
-for ac_file in .. \$CONFIG_FILES ; do
- if test "x\$ac_file" != x..; then
- echo \$ac_file >> \$ac_cs_root.sacfiles
- fi
-done
-if test -f \$ac_cs_root.sacfiles ; then
- perl $ac_aux_dir/config.pl "\$ac_cs_root.subs" "\$ac_cs_root.sacfiles" "\$ac_given_srcdir" "\$ac_given_INSTALL"
-fi
-rm -f \$ac_cs_root.s*
-
-EOF
- return;
-}
-
-sub insert_command_loop {
- print <<EOF;
- for ac_file in .. \$CONFIG_FILES ; do
-EOF
-}
View
1,464 admin/config.guess
@@ -1,1464 +0,0 @@
-#! /bin/sh
-# Attempt to guess a canonical system name.
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-# 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
-
-timestamp='2005-06-30'
-
-# This file is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
-# 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-
-# Originally written by Per Bothner <per@bothner.com>.
-# Please send patches to <config-patches@gnu.org>. Submit a context
-# diff and a properly formatted ChangeLog entry.
-#
-# This script attempts to guess a canonical system name similar to
-# config.sub. If it succeeds, it prints the system name on stdout, and
-# exits with 0. Otherwise, it exits with 1.
-#
-# The plan is that this can be called by configure scripts if you
-# don't specify an explicit build system type.
-
-me=`echo "$0" | sed -e 's,.*/,,'`
-
-usage="\
-Usage: $0 [OPTION]
-
-Output the configuration name of the system \`$me' is run on.
-
-Operation modes:
- -h, --help print this help, then exit
- -t, --time-stamp print date of last modification, then exit
- -v, --version print version number, then exit
-
-Report bugs and patches to <config-patches@gnu.org>."
-
-version="\
-GNU config.guess ($timestamp)
-
-Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
-Free Software Foundation, Inc.
-
-This is free software; see the source for copying conditions. There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-
-help="
-Try \`$me --help' for more information."
-
-# Parse command line
-while test $# -gt 0 ; do
- case $1 in
- --time-stamp | --time* | -t )
- echo "$timestamp" ; exit ;;
- --version | -v )
- echo "$version" ; exit ;;
- --help | --h* | -h )
- echo "$usage"; exit ;;
- -- ) # Stop option processing
- shift; break ;;
- - ) # Use stdin as input.
- break ;;
- -* )
- echo "$me: invalid option $1$help" >&2
- exit 1 ;;
- * )
- break ;;
- esac
-done
-
-if test $# != 0; then
- echo "$me: too many arguments$help" >&2
- exit 1
-fi
-
-trap 'exit 1' 1 2 15
-
-# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
-# compiler to aid in system detection is discouraged as it requires
-# temporary files to be created and, as you can see below, it is a
-# headache to deal with in a portable fashion.
-
-# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
-# use `HOST_CC' if defined, but it is deprecated.
-
-# Portable tmp directory creation inspired by the Autoconf team.
-
-set_cc_for_build='
-trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
-trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
-: ${TMPDIR=/tmp} ;
- { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
- { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
- { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
- { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
-dummy=$tmp/dummy ;
-tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
-case $CC_FOR_BUILD,$HOST_CC,$CC in
- ,,) echo "int x;" > $dummy.c ;
- for c in cc gcc c89 c99 ; do
- if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
- CC_FOR_BUILD="$c"; break ;
- fi ;
- done ;
- if test x"$CC_FOR_BUILD" = x ; then
- CC_FOR_BUILD=no_compiler_found ;
- fi
- ;;
- ,,*) CC_FOR_BUILD=$CC ;;
- ,*,*) CC_FOR_BUILD=$HOST_CC ;;
-esac ;'
-
-# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
-# (ghazi@noc.rutgers.edu 1994-08-24)
-if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
- PATH=$PATH:/.attbin ; export PATH
-fi
-
-UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
-UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
-UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
-UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
-
-# Note: order is significant - the case branches are not exclusive.
-
-case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
- *:NetBSD:*:*)
- # NetBSD (nbsd) targets should (where applicable) match one or
- # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
- # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently
- # switched to ELF, *-*-netbsd* would select the old
- # object file format. This provides both forward
- # compatibility and a consistent mechanism for selecting the
- # object file format.
- #
- # Note: NetBSD doesn't particularly care about the vendor
- # portion of the name. We always set it to "unknown".
- sysctl="sysctl -n hw.machine_arch"
- UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
- /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
- case "${UNAME_MACHINE_ARCH}" in
- armeb) machine=armeb-unknown ;;
- arm*) machine=arm-unknown ;;
- sh3el) machine=shl-unknown ;;
- sh3eb) machine=sh-unknown ;;
- *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
- esac
- # The Operating System including object format, if it has switched
- # to ELF recently, or will in the future.
- case "${UNAME_MACHINE_ARCH}" in
- arm*|i386|m68k|ns32k|sh3*|sparc|vax)
- eval $set_cc_for_build
- if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
- | grep __ELF__ >/dev/null
- then
- # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
- # Return netbsd for either. FIX?
- os=netbsd
- else
- os=netbsdelf
- fi
- ;;
- *)
- os=netbsd
- ;;
- esac
- # The OS release
- # Debian GNU/NetBSD machines have a different userland, and
- # thus, need a distinct triplet. However, they do not need
- # kernel version information, so it can be replaced with a
- # suitable tag, in the style of linux-gnu.
- case "${UNAME_VERSION}" in
- Debian*)
- release='-gnu'
- ;;
- *)
- release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
- ;;
- esac
- # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
- # contains redundant information, the shorter form:
- # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
- echo "${machine}-${os}${release}"
- exit ;;
- *:OpenBSD:*:*)
- UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
- echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
- exit ;;
- *:ekkoBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
- exit ;;
- macppc:MirBSD:*:*)
- echo powerppc-unknown-mirbsd${UNAME_RELEASE}
- exit ;;
- *:MirBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
- exit ;;
- alpha:OSF1:*:*)
- case $UNAME_RELEASE in
- *4.0)
- UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
- ;;
- *5.*)
- UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
- ;;
- esac
- # According to Compaq, /usr/sbin/psrinfo has been available on
- # OSF/1 and Tru64 systems produced since 1995. I hope that
- # covers most systems running today. This code pipes the CPU
- # types through head -n 1, so we only detect the type of CPU 0.
- ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1`
- case "$ALPHA_CPU_TYPE" in
- "EV4 (21064)")
- UNAME_MACHINE="alpha" ;;
- "EV4.5 (21064)")
- UNAME_MACHINE="alpha" ;;
- "LCA4 (21066/21068)")
- UNAME_MACHINE="alpha" ;;
- "EV5 (21164)")
- UNAME_MACHINE="alphaev5" ;;
- "EV5.6 (21164A)")
- UNAME_MACHINE="alphaev56" ;;
- "EV5.6 (21164PC)")
- UNAME_MACHINE="alphapca56" ;;
- "EV5.7 (21164PC)")
- UNAME_MACHINE="alphapca57" ;;
- "EV6 (21264)")
- UNAME_MACHINE="alphaev6" ;;
- "EV6.7 (21264A)")
- UNAME_MACHINE="alphaev67" ;;
- "EV6.8CB (21264C)")
- UNAME_MACHINE="alphaev68" ;;
- "EV6.8AL (21264B)")
- UNAME_MACHINE="alphaev68" ;;
- "EV6.8CX (21264D)")
- UNAME_MACHINE="alphaev68" ;;
- "EV6.9A (21264/EV69A)")
- UNAME_MACHINE="alphaev69" ;;
- "EV7 (21364)")
- UNAME_MACHINE="alphaev7" ;;
- "EV7.9 (21364A)")
- UNAME_MACHINE="alphaev79" ;;
- esac
- # A Pn.n version is a patched version.
- # A Vn.n version is a released version.
- # A Tn.n version is a released field test version.
- # A Xn.n version is an unreleased experimental baselevel.
- # 1.2 uses "1.2" for uname -r.
- echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- exit ;;
- Alpha\ *:Windows_NT*:*)
- # How do we know it's Interix rather than the generic POSIX subsystem?
- # Should we change UNAME_MACHINE based on the output of uname instead
- # of the specific Alpha model?
- echo alpha-pc-interix
- exit ;;
- 21064:Windows_NT:50:3)
- echo alpha-dec-winnt3.5
- exit ;;
- Amiga*:UNIX_System_V:4.0:*)
- echo m68k-unknown-sysv4
- exit ;;
- *:[Aa]miga[Oo][Ss]:*:*)
- echo ${UNAME_MACHINE}-unknown-amigaos
- exit ;;
- *:[Mm]orph[Oo][Ss]:*:*)
- echo ${UNAME_MACHINE}-unknown-morphos
- exit ;;
- *:OS/390:*:*)
- echo i370-ibm-openedition
- exit ;;
- *:z/VM:*:*)
- echo s390-ibm-zvmoe
- exit ;;
- *:OS400:*:*)
- echo powerpc-ibm-os400
- exit ;;
- arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
- echo arm-acorn-riscix${UNAME_RELEASE}
- exit ;;
- arm:riscos:*:*|arm:RISCOS:*:*)
- echo arm-unknown-riscos
- exit ;;
- SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
- echo hppa1.1-hitachi-hiuxmpp
- exit ;;
- Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
- # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
- if test "`(/bin/universe) 2>/dev/null`" = att ; then
- echo pyramid-pyramid-sysv3
- else
- echo pyramid-pyramid-bsd
- fi
- exit ;;
- NILE*:*:*:dcosx)
- echo pyramid-pyramid-svr4
- exit ;;
- DRS?6000:unix:4.0:6*)
- echo sparc-icl-nx6
- exit ;;
- DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
- case `/usr/bin/uname -p` in
- sparc) echo sparc-icl-nx7; exit ;;
- esac ;;
- sun4H:SunOS:5.*:*)
- echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit ;;
- sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
- echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit ;;
- i86pc:SunOS:5.*:*)
- echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit ;;
- sun4*:SunOS:6*:*)
- # According to config.sub, this is the proper way to canonicalize
- # SunOS6. Hard to guess exactly what SunOS6 will be like, but
- # it's likely to be more like Solaris than SunOS4.
- echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit ;;
- sun4*:SunOS:*:*)
- case "`/usr/bin/arch -k`" in
- Series*|S4*)
- UNAME_RELEASE=`uname -v`
- ;;
- esac
- # Japanese Language versions have a version number like `4.1.3-JL'.
- echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
- exit ;;
- sun3*:SunOS:*:*)
- echo m68k-sun-sunos${UNAME_RELEASE}
- exit ;;
- sun*:*:4.2BSD:*)
- UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
- test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
- case "`/bin/arch`" in
- sun3)
- echo m68k-sun-sunos${UNAME_RELEASE}
- ;;
- sun4)
- echo sparc-sun-sunos${UNAME_RELEASE}
- ;;
- esac
- exit ;;
- aushp:SunOS:*:*)
- echo sparc-auspex-sunos${UNAME_RELEASE}
- exit ;;
- # The situation for MiNT is a little confusing. The machine name
- # can be virtually everything (everything which is not
- # "atarist" or "atariste" at least should have a processor
- # > m68000). The system name ranges from "MiNT" over "FreeMiNT"
- # to the lowercase version "mint" (or "freemint"). Finally
- # the system name "TOS" denotes a system which is actually not
- # MiNT. But MiNT is downward compatible to TOS, so this should
- # be no problem.
- atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
- exit ;;
- atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
- exit ;;
- *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
- exit ;;
- milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
- echo m68k-milan-mint${UNAME_RELEASE}
- exit ;;
- hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
- echo m68k-hades-mint${UNAME_RELEASE}
- exit ;;
- *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
- echo m68k-unknown-mint${UNAME_RELEASE}
- exit ;;
- m68k:machten:*:*)
- echo m68k-apple-machten${UNAME_RELEASE}
- exit ;;
- powerpc:machten:*:*)
- echo powerpc-apple-machten${UNAME_RELEASE}
- exit ;;
- RISC*:Mach:*:*)
- echo mips-dec-mach_bsd4.3
- exit ;;
- RISC*:ULTRIX:*:*)
- echo mips-dec-ultrix${UNAME_RELEASE}
- exit ;;
- VAX*:ULTRIX*:*:*)
- echo vax-dec-ultrix${UNAME_RELEASE}
- exit ;;
- 2020:CLIX:*:* | 2430:CLIX:*:*)
- echo clipper-intergraph-clix${UNAME_RELEASE}
- exit ;;
- mips:*:*:UMIPS | mips:*:*:RISCos)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
-#ifdef __cplusplus
-#include <stdio.h> /* for printf() prototype */
- int main (int argc, char *argv[]) {
-#else
- int main (argc, argv) int argc; char *argv[]; {
-#endif
- #if defined (host_mips) && defined (MIPSEB)
- #if defined (SYSTYPE_SYSV)
- printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
- #endif
- #if defined (SYSTYPE_SVR4)
- printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
- #endif
- #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
- printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
- #endif
- #endif
- exit (-1);
- }
-EOF
- $CC_FOR_BUILD -o $dummy $dummy.c &&
- dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
- SYSTEM_NAME=`$dummy $dummyarg` &&
- { echo "$SYSTEM_NAME"; exit; }
- echo mips-mips-riscos${UNAME_RELEASE}
- exit ;;
- Motorola:PowerMAX_OS:*:*)
- echo powerpc-motorola-powermax
- exit ;;
- Motorola:*:4.3:PL8-*)
- echo powerpc-harris-powermax
- exit ;;
- Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
- echo powerpc-harris-powermax
- exit ;;
- Night_Hawk:Power_UNIX:*:*)
- echo powerpc-harris-powerunix
- exit ;;
- m88k:CX/UX:7*:*)
- echo m88k-harris-cxux7
- exit ;;
- m88k:*:4*:R4*)
- echo m88k-motorola-sysv4
- exit ;;
- m88k:*:3*:R3*)
- echo m88k-motorola-sysv3
- exit ;;
- AViiON:dgux:*:*)
- # DG/UX returns AViiON for all architectures
- UNAME_PROCESSOR=`/usr/bin/uname -p`
- if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
- then
- if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
- [ ${TARGET_BINARY_INTERFACE}x = x ]
- then
- echo m88k-dg-dgux${UNAME_RELEASE}
- else
- echo m88k-dg-dguxbcs${UNAME_RELEASE}
- fi
- else
- echo i586-dg-dgux${UNAME_RELEASE}
- fi
- exit ;;
- M88*:DolphinOS:*:*) # DolphinOS (SVR3)
- echo m88k-dolphin-sysv3
- exit ;;
- M88*:*:R3*:*)
- # Delta 88k system running SVR3
- echo m88k-motorola-sysv3
- exit ;;
- XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
- echo m88k-tektronix-sysv3
- exit ;;
- Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
- echo m68k-tektronix-bsd
- exit ;;
- *:IRIX*:*:*)
- echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
- exit ;;
- ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
- echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
- exit ;; # Note that: echo "'`uname -s`'" gives 'AIX '
- i*86:AIX:*:*)
- echo i386-ibm-aix
- exit ;;
- ia64:AIX:*:*)
- if [ -x /usr/bin/oslevel ] ; then
- IBM_REV=`/usr/bin/oslevel`
- else
- IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
- fi
- echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
- exit ;;
- *:AIX:2:3)
- if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #include <sys/systemcfg.h>
-
- main()
- {
- if (!__power_pc())
- exit(1);
- puts("powerpc-ibm-aix3.2.5");
- exit(0);
- }
-EOF
- if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
- then
- echo "$SYSTEM_NAME"
- else
- echo rs6000-ibm-aix3.2.5
- fi
- elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
- echo rs6000-ibm-aix3.2.4
- else
- echo rs6000-ibm-aix3.2
- fi
- exit ;;
- *:AIX:*:[45])
- IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
- if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
- IBM_ARCH=rs6000
- else
- IBM_ARCH=powerpc
- fi
- if [ -x /usr/bin/oslevel ] ; then
- IBM_REV=`/usr/bin/oslevel`
- else
- IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
- fi
- echo ${IBM_ARCH}-ibm-aix${IBM_REV}
- exit ;;
- *:AIX:*:*)
- echo rs6000-ibm-aix
- exit ;;
- ibmrt:4.4BSD:*|romp-ibm:BSD:*)
- echo romp-ibm-bsd4.4
- exit ;;
- ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and
- echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
- exit ;; # report: romp-ibm BSD 4.3
- *:BOSX:*:*)
- echo rs6000-bull-bosx
- exit ;;
- DPX/2?00:B.O.S.:*:*)
- echo m68k-bull-sysv3
- exit ;;
- 9000/[34]??:4.3bsd:1.*:*)
- echo m68k-hp-bsd
- exit ;;
- hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
- echo m68k-hp-bsd4.4
- exit ;;
- 9000/[34678]??:HP-UX:*:*)
- HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
- case "${UNAME_MACHINE}" in
- 9000/31? ) HP_ARCH=m68000 ;;
- 9000/[34]?? ) HP_ARCH=m68k ;;
- 9000/[678][0-9][0-9])
- if [ -x /usr/bin/getconf ]; then
- sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
- sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
- case "${sc_cpu_version}" in
- 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
- 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
- 532) # CPU_PA_RISC2_0
- case "${sc_kernel_bits}" in
- 32) HP_ARCH="hppa2.0n" ;;
- 64) HP_ARCH="hppa2.0w" ;;
- '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20
- esac ;;
- esac
- fi
- if [ "${HP_ARCH}" = "" ]; then
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
-
- #define _HPUX_SOURCE
- #include <stdlib.h>
- #include <unistd.h>
-
- int main ()
- {
- #if defined(_SC_KERNEL_BITS)
- long bits = sysconf(_SC_KERNEL_BITS);
- #endif
- long cpu = sysconf (_SC_CPU_VERSION);
-
- switch (cpu)
- {
- case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
- case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
- case CPU_PA_RISC2_0:
- #if defined(_SC_KERNEL_BITS)
- switch (bits)
- {
- case 64: puts ("hppa2.0w"); break;
- case 32: puts ("hppa2.0n"); break;
- default: puts ("hppa2.0"); break;
- } break;
- #else /* !defined(_SC_KERNEL_BITS) */
- puts ("hppa2.0"); break;
- #endif
- default: puts ("hppa1.0"); break;
- }
- exit (0);
- }
-EOF
- (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
- test -z "$HP_ARCH" && HP_ARCH=hppa
- fi ;;
- esac
- if [ ${HP_ARCH} = "hppa2.0w" ]
- then
- # avoid double evaluation of $set_cc_for_build
- test -n "$CC_FOR_BUILD" || eval $set_cc_for_build
-
- # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
- # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler
- # generating 64-bit code. GNU and HP use different nomenclature:
- #
- # $ CC_FOR_BUILD=cc ./config.guess
- # => hppa2.0w-hp-hpux11.23
- # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
- # => hppa64-hp-hpux11.23
-
- if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
- grep __LP64__ >/dev/null
- then
- HP_ARCH="hppa2.0w"
- else
- HP_ARCH="hppa64"
- fi
- fi
- echo ${HP_ARCH}-hp-hpux${HPUX_REV}
- exit ;;
- ia64:HP-UX:*:*)
- HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
- echo ia64-hp-hpux${HPUX_REV}
- exit ;;
- 3050*:HI-UX:*:*)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #include <unistd.h>
- int
- main ()
- {
- long cpu = sysconf (_SC_CPU_VERSION);
- /* The order matters, because CPU_IS_HP_MC68K erroneously returns
- true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct
- results, however. */
- if (CPU_IS_PA_RISC (cpu))
- {
- switch (cpu)
- {
- case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
- case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
- case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
- default: puts ("hppa-hitachi-hiuxwe2"); break;
- }
- }
- else if (CPU_IS_HP_MC68K (cpu))
- puts ("m68k-hitachi-hiuxwe2");
- else puts ("unknown-hitachi-hiuxwe2");
- exit (0);
- }
-EOF
- $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
- { echo "$SYSTEM_NAME"; exit; }
- echo unknown-hitachi-hiuxwe2
- exit ;;
- 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
- echo hppa1.1-hp-bsd
- exit ;;
- 9000/8??:4.3bsd:*:*)
- echo hppa1.0-hp-bsd
- exit ;;
- *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
- echo hppa1.0-hp-mpeix
- exit ;;
- hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
- echo hppa1.1-hp-osf
- exit ;;
- hp8??:OSF1:*:*)
- echo hppa1.0-hp-osf
- exit ;;
- i*86:OSF1:*:*)
- if [ -x /usr/sbin/sysversion ] ; then
- echo ${UNAME_MACHINE}-unknown-osf1mk
- else
- echo ${UNAME_MACHINE}-unknown-osf1
- fi
- exit ;;
- parisc*:Lites*:*:*)
- echo hppa1.1-hp-lites
- exit ;;
- C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
- echo c1-convex-bsd
- exit ;;
- C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
- if getsysinfo -f scalar_acc
- then echo c32-convex-bsd
- else echo c2-convex-bsd
- fi
- exit ;;
- C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
- echo c34-convex-bsd
- exit ;;
- C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
- echo c38-convex-bsd
- exit ;;
- C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
- echo c4-convex-bsd
- exit ;;
- CRAY*Y-MP:*:*:*)
- echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit ;;
- CRAY*[A-Z]90:*:*:*)
- echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
- | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
- -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
- -e 's/\.[^.]*$/.X/'
- exit ;;
- CRAY*TS:*:*:*)
- echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit ;;
- CRAY*T3E:*:*:*)
- echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit ;;
- CRAY*SV1:*:*:*)
- echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit ;;
- *:UNICOS/mp:*:*)
- echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit ;;
- F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
- FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
- FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
- echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
- exit ;;
- 5000:UNIX_System_V:4.*:*)
- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
- FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
- echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
- exit ;;
- i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
- echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
- exit ;;
- sparc*:BSD/OS:*:*)
- echo sparc-unknown-bsdi${UNAME_RELEASE}
- exit ;;
- *:BSD/OS:*:*)
- echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
- exit ;;
- *:FreeBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
- exit ;;
- i*:CYGWIN*:*)
- echo ${UNAME_MACHINE}-pc-cygwin
- exit ;;
- i*:MINGW*:*)
- echo ${UNAME_MACHINE}-pc-mingw32
- exit ;;
- i*:windows32*:*)
- # uname -m includes "-pc" on this system.
- echo ${UNAME_MACHINE}-mingw32
- exit ;;
- i*:PW*:*)
- echo ${UNAME_MACHINE}-pc-pw32
- exit ;;
- x86:Interix*:[34]*)
- echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//'
- exit ;;
- [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
- echo i${UNAME_MACHINE}-pc-mks
- exit ;;
- i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
- # How do we know it's Interix rather than the generic POSIX subsystem?
- # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
- # UNAME_MACHINE based on the output of uname instead of i386?
- echo i586-pc-interix
- exit ;;
- i*:UWIN*:*)
- echo ${UNAME_MACHINE}-pc-uwin
- exit ;;
- amd64:CYGWIN*:*:*)
- echo x86_64-unknown-cygwin
- exit ;;
- p*:CYGWIN*:*)
- echo powerpcle-unknown-cygwin
- exit ;;
- prep*:SunOS:5.*:*)
- echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit ;;
- *:GNU:*:*)
- # the GNU system
- echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
- exit ;;
- *:GNU/*:*:*)
- # other systems with GNU libc and userland
- echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
- exit ;;
- i*86:Minix:*:*)
- echo ${UNAME_MACHINE}-pc-minix
- exit ;;
- arm*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- cris:Linux:*:*)
- echo cris-axis-linux-gnu
- exit ;;
- crisv32:Linux:*:*)
- echo crisv32-axis-linux-gnu
- exit ;;
- frv:Linux:*:*)
- echo frv-unknown-linux-gnu
- exit ;;
- ia64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- m32r*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- m68*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- mips:Linux:*:*)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #undef CPU
- #undef mips
- #undef mipsel
- #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
- CPU=mipsel
- #else
- #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
- CPU=mips
- #else
- CPU=
- #endif
- #endif
-EOF
- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
- test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
- ;;
- mips64:Linux:*:*)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #undef CPU
- #undef mips64
- #undef mips64el
- #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
- CPU=mips64el
- #else
- #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
- CPU=mips64
- #else
- CPU=
- #endif
- #endif
-EOF
- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
- test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
- ;;
- ppc:Linux:*:*)
- echo powerpc-unknown-linux-gnu
- exit ;;
- ppc64:Linux:*:*)