Skip to content
How to blink a LED on SHA2017 badge with Arduino IDE
Other
  1. Other 100.0%
Branch: master
Clone or download
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Type Name Latest commit message Commit time
Failed to load latest commit information.
README.md
sha2017badge-arduino-blink.ino
sha2017badge-arduino-blink.jpg
sha2017badge-arduinoide-screenshot.jpg

README.md

How to blink a LED on SHA2017 badge with Arduino IDE

Blink a LED for the SHA2017 badge.

Arduino IDE supports ESP32 modules. Just pick the default "ESP32 Dev module" for now. Adding proper support for the badge would be great as well.

esp32 arduino ide

Code

Just load "sha2017-badge-blink.ino" in your arduino ide.

Wiring

LED is connected to the X2 2x6 connector "Port Expander", to top right PIN1 (GND) and to PIN5 (EXTIO-2, which is connected to IO17 on the ESP32).

The pinout of the connector "Port Expander" is here: https://github.com/SHA2017-badge/PCB/blob/master/sha2017_rev0_1_0_dev_schematic.pdf

Picture

SHA2017 blink led

You can’t perform that action at this time.