Provides a set of primitives for managing firewalls and associated rules.
PLEASE NOTE - The resource/providers in this cookbook are under heavy development. An attempt is being made to keep the resource simple/stupid by starting with less sophisticated firewall implementations first and refactor/vet the resource definition with each successive provider.
- Ubuntu 10.04
- Ubuntu 11.04
- :enable: enable the firewall. this will make any rules that have been defined 'active'.
- :disable: disable the firewall. drop any rules and put the node in an unprotected state.
- :reset: disables and resets firewall to installation defaults.
- name: name attribute. arbitrary name to uniquely identify this resource
- log_level: level of verbosity the firewall should log at. valid values are: :low, :medium, :high, :full. default is :low.
- platform default: Ubuntu
# enable platform default firewall firewall "ufw" do action :enable end # increase logging past default of 'low' firewall "debug firewalls" do log_level :high action :enable end
- :allow: the rule should allow incoming traffic.
- :deny: the rule should deny incoming traffic.
- :reject: the rule should reject incoming traffic.
- name: name attribute. arbitrary name to uniquely identify this firewall rule
- protocol: valid values are: :udp, :tcp. default is all protocols
- port: incoming port number (ie. 22 to allow inbound SSH)
- source: ip address or subnet to filter on incoming traffic. default is
- destination: ip address or subnet to filter on outgoing traffic.
- dest_port: outgoing port number.
- position: position to insert rule at. if not provided rule is inserted at the end of the rule list.
- direction: direction of the rule. valid values are: :in, :out, default is :in
- interface: interface to apply rule (ie. 'eth0').
- logging: may be added to enable logging for a particular rule. valid values are: :connections, :packets. In the ufw provider, :connections logs new connections while :packets logs all packets.
- platform default: Ubuntu
# open standard ssh port, enable firewall firewall_rule "ssh" do port 22 action :allow notifies :enable, "firewall[ufw]" end # open standard http port to tcp traffic only; insert as first rule firewall_rule "http" do port 80 protocol :tcp position 1 action :allow end # restrict port 13579 to 10.0.111.0/24 on eth0 firewall_rule "myapplication" do port 13579 source '10.0.111.0/24' direction 'in' interface 'eth0' action :allow end firewall "ufw" do action :nothing end
License and Author
Author:: Seth Chisamore (email@example.com)
Copyright:: Copyright (c) 2011 Opscode, Inc.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.