- adguardhome
  - disable DNSStubListener
    sudo nano /etc/systemd/resolved.conf
      DNS=127.0.0.1
      DNSStubListener=no
    sudo mv /etc/resolv.conf /etc/resolv.conf.backup
    sudo ln -s /run/systemd/resolve/resolv.conf /etc/resolv.conf
    sudo systemctl reload-or-restart systemd-resolved
  - Setup
    1. Run without specifying user
    2. Follow setup wizard
    3. Stop container
    4. Run `sudo chown -R mithras:mithras ./adguard/`
    5. Specify user
- mosquitto
  - MQTT-Explorer
- portainer
- rhasspy
- swag
- homeassistant
  - wake_on_lan
    1. BIOS:
      APM Configuration\ErP Ready: DISABLED
      APM Configuration\Power on by PCI-E: ENABLED
    2. 
      sysctl -w net.ipv4.icmp_echo_ignore_broadcasts=0
      sysctl -w net.ipv4.conf.all.bc_forwarding=1
      sysctl -w net.ipv4.conf.XXX.bc_forwarding=1 # XXX is Iface from "route" where Destination matches container subnet (e.g. br-e01398b37d93)
      nano /etc/sysctl.d/97-docker-broadcast.conf
        net.ipv4.icmp_echo_ignore_broadcasts=0
        net.ipv4.conf.all.bc_forwarding=1
        net.ipv4.conf.XXX.bc_forwarding=1
  - RM3-Mini
    - https://play.google.com/store/apps/details?id=cn.com.broadlink.econtrol.plus
      1. Hold reset until start flashing in 3 quick series
      2. Follow wifi setup guide
  - bluetooth
    - host
      sudo apt install bluez dbus-broker
      ls /sys/class/bluetooth -l
    - container
      volumes:
        - /run/dbus:/run/dbus:ro
      privileged: true
    - configuration
      bluetooth:
- appdaemon
- z-wave
  - HUSBZB-1
      - /dev/serial/by-id/usb-Silicon_Labs_HubZ_Smart_Home_Controller_51300097-if00-port0:/dev/zwave # z-wave
      - /dev/serial/by-id/usb-Silicon_Labs_HubZ_Smart_Home_Controller_51300097-if01-port0:/dev/zwave # zigbee
- zigbee
  - SONOFF Zigbee 3.0
    - /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_fa78108a5586ec11b33feb3719c2d21c-if00-port0