-
-
Notifications
You must be signed in to change notification settings - Fork 2.9k
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Neutron F435 AIO no DSHOT output #13618
Comments
Having the same issue with my JHEF7DUAL fc, was working fine and then flashed BF 4.5, BLHeli configurator reads from the esc via passthrough, but no spinning when trying to arm or use BF motor direction configurator |
Same here.. FC BayacRC Dolphin. And some errors with dshot600, with dshot300 - no errors. |
Having similar issues with DShot 600 and 300 as well. I'm running a Tmotor VeloxF7SE. Flashed betaflight 4.5 on it and when I test motors erros on dshot telemetry appear, usually just in one motor. And it reacts when other motors are spinning. Flashed back t9 4.4 and it's fine not errors. Bug in Dshot?? |
which version of AM32 do you have installed on NeutronRC F435? Mine (35A version) works fine with 4.5 on AM32_NEUTRON_2_6S_AIO_F421_2.10.hex. |
I use ESC 1: NEUTRON - AM32, 2.0, Bootloader v1 (PB4), MCU: F421 |
Can you try with 2.10 (available here: https://github.com/am32-firmware/AM32/releases/tag/v2.10) ? |
Perhaps also try 4.5.1-dev (first) |
4.5.1-dev works |
Fixed in 2d3c8ee |
Describe the bug
Neutron F435 AIO with AM32 ESCs. There is not DSHOT outpout for BF 4.5-RC4+. Tested in motor tab.
4.5.0-RC1 WORKS
4.5.0-RC2 WORKS
4.5.0-RC3 WORKS
4.5.0-RC4 NO DSHOT output, motor doesn not spin (works if bidirection dshot is ON)
4.5.0 NO DSHOT output, motor doesn not spin (works if bidirection dshot is ON)
To Reproduce
Flash 4.5.0 into neutron F435mini, go to motor tab, test motors
Expected behavior
dshot output
Support ID
Flight controller
Neutron F435 AIO AM32
Other components
xing 1404 4600kv
How are the different components wired up (including port information)
no other component connected
Add any other context about the problem that you think might be relevant here
MCU AT32F435 Clock=288MHz, Vref=3.27V, Core temp=25degC
Stack size: 2048, Stack address: 0x2002fff0
Configuration: CONFIGURED, size: 3771, max available: 16384
Devices detected: SPI:1, I2C:1
Gyros detected: gyro 1 locked dma
GYRO=BMI270, ACC=BMI270, BARO=DPS310
OSD: MSP (53 x 20)
BUILD KEY: b817110c6bae6144a0c573448561c7c4 (4.5.0)
System Uptime: 9 seconds, Current Time: 2024-05-02T19:56:06.837+00:00
CPU:8%, cycle time: 314, GYRO rate: 3184, RX rate: 15, System rate: 9
Voltage: 4 * 0.01V (0S battery - INIT)
I2C Errors: 0
FLASH: JEDEC ID=0x00ef4018 16M
GPS: NOT ENABLED
Arming disable flags: RXLOSS CLI MSP
The text was updated successfully, but these errors were encountered: