CMake

www.cmake.org

The CMake build system is supported on the following platforms:

FreeBSD
Linux
Microsoft Visual C
MinGW and Msys
macOS, iOS, tvOS, and visionOS with support for XCode
Android
Emscripten
NetBSD
Haiku
Nintendo 3DS
PlayStation 2
PlayStation Portable
PlayStation Vita
QNX 7.x/8.x
RiscOS

Building SDL

Assuming the source tree of SDL is located at ~/sdl, this will configure and build SDL in the ~/build directory:

cmake -S ~/sdl -B ~/build
cmake --build ~/build

Installation can be done using:

cmake --install ~/build --prefix /usr/local        # '--install' requires CMake 3.15, or newer

This will install SDL to /usr/local.

Building SDL tests

You can build the SDL test programs by adding -DSDL_TESTS=ON to the first cmake command above:

cmake -S ~/sdl -B ~/build -DSDL_TEST_LIBRARY=ON -DSDL_TESTS=ON

and then building normally. In this example, the test programs will be built and can be run from ~/build/tests/.

Including SDL in your project

SDL can be included in your project in 2 major ways:

using a system SDL library, provided by your (*nix) distribution or a package manager
using a vendored SDL library: this is SDL copied or symlinked in a subfolder.

The following CMake script supports both, depending on the value of MYGAME_VENDORED.

cmake_minimum_required(VERSION 3.5)
project(mygame)

# Create an option to switch between a system sdl library and a vendored SDL library
option(MYGAME_VENDORED "Use vendored libraries" OFF)

if(MYGAME_VENDORED)
    # This assumes you have added SDL as a submodule in vendored/SDL
    add_subdirectory(vendored/SDL EXCLUDE_FROM_ALL)
else()
    # 1. Look for a SDL3 package,
    # 2. look for the SDL3-shared component, and
    # 3. fail if the shared component cannot be found.
    find_package(SDL3 REQUIRED CONFIG REQUIRED COMPONENTS SDL3-shared)
endif()

# Create your game executable target as usual
add_executable(mygame WIN32 mygame.c)

# Link to the actual SDL3 library.
target_link_libraries(mygame PRIVATE SDL3::SDL3)

A system SDL library

For CMake to find SDL, it must be installed in a default location CMake is looking for.

The following components are available, to be used as an argument of find_package.

Component name	Description
SDL3-shared	The SDL3 shared library, available through the `SDL3::SDL3-shared` target
SDL3-static	The SDL3 static library, available through the `SDL3::SDL3-static` target
SDL3_test	The SDL3_test static library, available through the `SDL3::SDL3_test` target
SDL3	The SDL3 library, available through the `SDL3::SDL3` target. This is an alias of `SDL3::SDL3-shared` or `SDL3::SDL3-static`. This component is always available.
Headers	The SDL3 headers, available through the `SDL3::Headers` target. This component is always available.

Using a vendored SDL

This only requires a copy of SDL in a subdirectory + add_subdirectory. Alternatively, use FetchContent. Depending on the configuration, the same targets as a system SDL package are available.

CMake configuration options

Build optimized library

By default, CMake provides 4 build types: Debug, Release, RelWithDebInfo and MinSizeRel. The main difference(s) between these are the optimization options and the generation of debug info. To configure SDL as an optimized Release library, configure SDL with:

cmake ~/SDL -DCMAKE_BUILD_TYPE=Release

To build it, run:

cmake --build . --config Release

Shared or static

By default, only a dynamic (=shared) SDL library is built and installed. The options -DSDL_SHARED= and -DSDL_STATIC= accept boolean values to change this.

Exceptions exist:

some platforms don't support dynamic libraries, so only -DSDL_STATIC=ON makes sense.
a static Apple framework is not supported

Pass custom compile options to the compiler

Use CMAKE_<LANG>_FLAGS to pass extra flags to the compiler.
Use CMAKE_EXE_LINKER_FLAGS to pass extra option to the linker for executables.
Use CMAKE_SHARED_LINKER_FLAGS to pass extra options to the linker for shared libraries.

Examples

build a SDL library optimized for (more) modern x64 microprocessor architectures.

With gcc or clang:

cmake ~/sdl -DCMAKE_C_FLAGS="-march=x86-64-v3" -DCMAKE_CXX_FLAGS="-march=x86-64-v3"

With Visual C:

cmake .. -DCMAKE_C_FLAGS="/ARCH:AVX2" -DCMAKE_CXX_FLAGS="/ARCH:AVX2"

Apple

CMake documentation for cross building for Apple: link

iOS/tvOS/visionOS

CMake 3.14+ natively includes support for iOS, tvOS and watchOS. visionOS requires CMake 3.28+. SDL binaries may be built using Xcode or Make, possibly among other build-systems.

When using a compatible version of CMake, it should be possible to:

build SDL dylibs, both static and dynamic dylibs
build SDL frameworks, only shared
build SDL test apps

Frameworks

Configure with -DSDL_FRAMEWORK=ON to build a SDL framework instead of a dylib shared library. Only shared frameworks are supported, no static ones.

Platforms

Use -DCMAKE_PLATFORM_NAME=<value> to configure the platform. CMake can target only one platform at a time.

Apple platform	`CMAKE_SYSTEM_NAME` value
macOS (MacOS X)	`Darwin`
iOS	`iOS`
tvOS	`tvOS`
visionOS	`visionOS`
watchOS	`watchOS`

Universal binaries

A universal binaries, can be built by configuring CMake with -DCMAKE_OSX_ARCHITECTURES=<semicolon-separated list of CPU architectures>.

For example -DCMAKE_OSX_ARCHITECTURES="arm64;x86_64" will build binaries that run on both Intel cpus and Apple silicon.

SDL supports following Apple architectures:

Platform	`CMAKE_OSX_ARCHITECTURES` value
64-bit ARM (Apple Silicon)	`arm64`
x86_64	`x86_64`
32-bit ARM	`armv7s`

CMake documentation: link

Simulators and/or non-default maxOS platform SDK

Use -DCMAKE_OSX_SYSROOT=<value> to configure a different platform SDK. The value can be either the name of the SDK, or a full path to the sdk (e.g. /full/path/to/iPhoneOS.sdk).

SDK	`CMAKE_OSX_SYSROOT` value
iphone	`iphoneos`
iphonesimulator	`iphonesimulator`
appleTV	`appletvos`
appleTV simulator	`appletvsimulator`
visionOS	`xr`
visionOS simulator	`xrsimulator`
watchOS	`watchos`
watchOS simulator	`watchsimulator`

Append with a version number to target a specific SDK revision: e.g. iphoneos12.4, appletvos12.4.

CMake documentation: link

Examples

for macOS, building a dylib and/or static library for x86_64 and arm64:

cmake ~/sdl -DCMAKE_SYSTEM_NAME=Darwin -DCMAKE_OSX_ARCHITECTURES="x86_64;arm64"

for macOS, building an universal framework for x86_64 and arm64:

cmake ~/sdl -DSDL_FRAMEWORK=ON -DCMAKE_SYSTEM_NAME=Darwin -DCMAKE_OSX_ARCHITECTURES="x86_64;arm64"

for iOS-Simulator, using the latest, installed SDK:

cmake ~/sdl -DCMAKE_SYSTEM_NAME=iOS -DCMAKE_OSX_SYSROOT=iphonesimulator -DCMAKE_OSX_ARCHITECTURES=x86_64

for iOS-Device, using the latest, installed SDK, 64-bit only

cmake ~/sdl -DCMAKE_SYSTEM_NAME=iOS -DCMAKE_OSX_SYSROOT=iphoneos -DCMAKE_OSX_ARCHITECTURES=arm64

for iOS-Device, using the latest, installed SDK, mixed 32/64 bit

cmake ~/sdl -DCMAKE_SYSTEM_NAME=iOS -DCMAKE_OSX_SYSROOT=iphoneos -DCMAKE_OSX_ARCHITECTURES="arm64;armv7s"

for iOS-Device, using a specific SDK revision (iOS 12.4, in this example):

cmake ~/sdl -DCMAKE_SYSTEM_NAME=iOS -DCMAKE_OSX_SYSROOT=iphoneos12.4 -DCMAKE_OSX_ARCHITECTURES=arm64

for iOS-Simulator, using the latest, installed SDK, and building SDL test apps (as .app bundles):

cmake ~/sdl -DSDL_TESTS=1 -DCMAKE_SYSTEM_NAME=iOS -DCMAKE_OSX_SYSROOT=iphonesimulator -DCMAKE_OSX_ARCHITECTURES=x86_64

for tvOS-Simulator, using the latest, installed SDK:

cmake ~/sdl -DCMAKE_SYSTEM_NAME=tvOS -DCMAKE_OSX_SYSROOT=appletvsimulator -DCMAKE_OSX_ARCHITECTURES=x86_64

for tvOS-Device, using the latest, installed SDK:

cmake ~/sdl -DCMAKE_SYSTEM_NAME=tvOS -DCMAKE_OSX_SYSROOT=appletvos -DCMAKE_OSX_ARCHITECTURES=arm64`

for QNX/aarch64, using the latest, installed SDK:

cmake ~/sdl -DCMAKE_TOOLCHAIN_FILE=~/sdl/build-scripts/cmake-toolchain-qnx-aarch64le.cmake -DSDL_X11=0

SDL-specific CMake options

SDL can be customized through (platform-specific) CMake options. The following table shows generic options that are available for most platforms. At the end of SDL CMake configuration, a table shows all CMake options along with its detected value.

CMake option	Valid values	Description
`-DSDL_SHARED=`	`ON`/`OFF`	Build SDL shared library (not all platforms support this) (`libSDL3.so`/`libSDL3.dylib`/`SDL3.dll`)
`-DSDL_STATIC=`	`ON`/`OFF`	Build SDL static library (`libSDL3.a`/`SDL3-static.lib`)
`-DSDL_TEST_LIBRARY=`	`ON`/`OFF`	Build SDL test library (`libSDL3_test.a`/`SDL3_test.lib`)
`-DSDL_TESTS=`	`ON`/`OFF`	Build SDL test programs (requires `-DSDL_TEST_LIBRARY=ON`)
`-DSDL_DISABLE_INSTALL=`	`ON`/`OFF`	Don't create a SDL install target
`-DSDL_DISABLE_INSTALL_DOCS=`	`ON`/`OFF`	Don't install the SDL documentation
`-DSDL_INSTALL_TESTS=`	`ON`/`OFF`	Install the SDL test programs

CMake FAQ

How do I copy a SDL3 dynamic library to another location?

Use CMake generator expressions. Generator expressions support multiple configurations, and are evaluated during build system generation time.

On Windows, the following example this copies SDL3.dll to the directory where mygame.exe is built. On Unix systems, $<TARGET_FILE:...> will refer to the dynamic library (or framework).

if(WIN32)
    add_custom_command(
        TARGET mygame POST_BUILD
        COMMAND "${CMAKE_COMMAND}" -E copy $<TARGET_FILE:SDL3::SDL3-shared> $<TARGET_FILE_DIR:mygame>
        VERBATIM
    )
endif()

Help, it doesn't work!

Below, a SDL3 CMake project can be found that builds 99.9% of time (assuming you have internet connectivity). When you have a problem with building or using SDL, please modify it until it reproduces your issue.

cmake_minimum_required(VERSION 3.16)
project(sdl_issue)

# !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
# !!!!!!                                                                            !!!!!!
# !!!!!!     This CMake script is not using "CMake best practices".                 !!!!!!
# !!!!!!                 Don't use it in your project.                              !!!!!!
# !!!!!!                                                                            !!!!!!
# !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

# 1. Try system SDL3 package first
find_package(SDL3 QUIET)
if(SDL3_FOUND)
    message(STATUS "Using SDL3 via find_package")
endif()

# 2. Try using a vendored SDL library
if(NOT SDL3_FOUND AND EXISTS "${CMAKE_CURRENT_LIST_DIR}/SDL/CMakeLists.txt")
    add_subdirectory(SDL)
    message(STATUS "Using SDL3 via add_subdirectory")
    set(SDL3_FOUND TRUE)
endif()

# 3. Download SDL, and use that.
if(NOT SDL3_FOUND)
    include(FetchContent)
    set(SDL_SHARED TRUE CACHE BOOL "Build a SDL shared library (if available)")
    set(SDL_STATIC TRUE CACHE BOOL "Build a SDL static library (if available)")
    FetchContent_Declare(
        SDL
        GIT_REPOSITORY https://github.com/libsdl-org/SDL.git
        GIT_TAG main  # Replace this with a particular git tag or git hash
        GIT_SHALLOW TRUE
        GIT_PROGRESS TRUE
    )
    message(STATUS "Using SDL3 via FetchContent")
    FetchContent_MakeAvailable(SDL)
    set_property(DIRECTORY "${CMAKE_CURRENT_BINARY_DIR}/_deps/sdl-src" PROPERTY EXCLUDE_FROM_ALL TRUE)
endif()

file(WRITE main.c [===========================================[
/**
 * Modify this source such that it reproduces your problem.
 */

/* START of source modifications */

#include <SDL3/SDL.h>
/*
 * SDL3/SDL_main.h is explicitly not included such that a terminal window would appear on Windows.
 */

int main(int argc, char *argv[]) {
    (void)argc;
    (void)argv;

    if (SDL_Init(SDL_INIT_VIDEO) < 0) {
        SDL_Log("SDL_Init failed (%s)", SDL_GetError());
        return 1;
    }

    SDL_Window *window = NULL;
    SDL_Renderer *renderer = NULL;

    if (SDL_CreateWindowAndRenderer("SDL issue", 640, 480, 0, &window, &renderer) < 0) {
        SDL_Log("SDL_CreateWindowAndRenderer failed (%s)", SDL_GetError());
        SDL_Quit();
        return 1;
    }

    while (1) {
        int finished = 0;
        SDL_Event event;
        while (SDL_PollEvent(&event)) {
            if (event.type == SDL_EVENT_QUIT) {
                finished = 1;
                break;
            }
        }
        if (finished) {
            break;
        }

        SDL_SetRenderDrawColor(renderer, 80, 80, 80, SDL_ALPHA_OPAQUE);
        SDL_RenderClear(renderer);
        SDL_RenderPresent(renderer);
    }

    SDL_DestroyRenderer(renderer);
    SDL_DestroyWindow(window);

    SDL_Quit();
    return 0;
}

/* END of source modifications */

]===========================================])

add_executable(sdl_issue main.c)

target_link_libraries(sdl_issue PRIVATE SDL3::SDL3)
# target_link_libraries(sdl_issue PRIVATE SDL3::SDL3-shared)
# target_link_libraries(sdl_issue PRIVATE SDL3::SDL3-static)

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

README-cmake.md

README-cmake.md

CMake

Building SDL

Building SDL tests

Including SDL in your project

A system SDL library

Using a vendored SDL

CMake configuration options

Build optimized library

Shared or static

Pass custom compile options to the compiler

Examples

Apple

iOS/tvOS/visionOS

Frameworks

Platforms

Universal binaries

Simulators and/or non-default maxOS platform SDK

Examples

SDL-specific CMake options

CMake FAQ

How do I copy a SDL3 dynamic library to another location?

Help, it doesn't work!

Files

README-cmake.md

Latest commit

History

README-cmake.md

File metadata and controls

CMake

Building SDL

Building SDL tests

Including SDL in your project

A system SDL library

Using a vendored SDL

CMake configuration options

Build optimized library

Shared or static

Pass custom compile options to the compiler

Examples

Apple

iOS/tvOS/visionOS

Frameworks

Platforms

Universal binaries

Simulators and/or non-default maxOS platform SDK

Examples

SDL-specific CMake options

CMake FAQ

How do I copy a SDL3 dynamic library to another location?

Help, it doesn't work!